River Greet

The River Greet is a small river in Nottinghamshire, England. Rising close to the village of Kirklington, the Greet flows in a southeasterly direction past Southwell and Rolleston to meet the River Trent at Fiskerton.

Greet
The river downstream of Caudwell Mill, Southwell
Location
CountryEngland
CountyNottinghamshire
Physical characteristics
Source 
  locationKirklington
MouthRiver Trent
  location
Fiskerton
  coordinates
53°3′20″N 0°53′34″W
River Greet
source
source
lakes
Mill Farm Mill
Cotton Mill Dyke
Southwell Road bridge
A617 bridge, Kirklington
lake
Edingley Beck
Maythorne Mill
Caudwell Mill
Station Road bridge
A612 bridge, Southwell
Upton Mill
Southwell Racecourse
Rolleston Mill
Rolleston railway station
Station Road bridge, Rolleston
Halloughton Dumble
Fiskerton Mill
Main Street bridge, Fiskerton
River Trent

Hydrology

The river has a catchment of 17.85 square miles (46.2 km2) and an average flow of 6.08 million gallons (27.65 Megalitres) per day, measured at the gauging station in Southwell. The catchment receives 25.47 inches (647 mm) of rainfall in an average year.[1] Above Southwell, the underlying geology is mainly Sherwood and Mercia sandstone, with some Mercia mudstone along the southern edge of the catchment. Below Southwell, the geology is predominantly Mercia mudstone. There is a layer of clay, sand and gravel alluvium overlaying this in the river channel.[2] The river is greatly affected by rainfall, raising levels and muddying the water.

Course

The river rises as a series of springs to the west of Kirklington, close to the 160-foot (49 m) contour. It is joined by Cotton Mill Dyke and Edingley Beck, and to the east of Kirklington, turns to flow in a south-easterly direction. Halam Beck joins from the south, and there is a disused mill at Maythorne Farm.[3] It was built as a cotton mill in 1795 by a hop merchant, to supply yarn to the framework knitting industry. The firm of Messrs. Bean and Johnson altered it in the early nineteenth century, after which silk and lace thread was produced. A small community was established around the mill, with cottages for some of the workers, of whom there were 70 in 1838, a general store, a public house and a mission hall. Willow for making baskets was grown in osier beds, and hops were also cultivated. The building was used as a billet for soldiers during the Second World War, by which time its industrial function had ceased. It has subsequently been converted into flats, with some of the outbuildings used as industrial workshops.[4] There are two mill buildings, the north mill and the south mill, both of which are grade II listed structures.[5][6] Below the mill the Robin Hood Way, a long distance footpath, follows the banks of the river, which forms the northern boundary of Southwell. There is a wildfowl centre on the north bank,[3] and Caudwell flour Mill is on the south bank. It was built over the site of Burgage mill, a medieval building, and was bought by Charles Caudwell in 1851. He increased the capacity of the mill, which was subsequently damaged by fires in 1867, 1893 and 1917. Each time the mill was rebuilt, the equipment was upgraded. The Caudwell family were millers for four generations, after which Associated British Foods bought the mill. It closed in 1977, and was turned into flats in 1989.[4]

After leaving the mill, the river crosses under the A612 road and flows through open countryside, to reach Upton Mill. It passes to the north of Southwell Racecourse, and then turns to the south,[3] where Rolleston Mill is built over its course. This is a late eighteenth-century brick structure, with a basement, two storeys and a garret, which still contains some of the milling equipment. It is a grade II listed structure.[7] The river continues under the Nottingham to Lincoln Line close to Rolleston railway station, to reach Fiskerton Mill, built on the site of a medieval mill owned by the monks of Thurgaton Priory.[8] Just beyond the mill, it passes under a minor road and into the River Trent.[3]

History

There was some sort of dispute in 1598, when the millers from Fiskerton, Rolleston and Upton went to Newark to collect corn for milling. They were detained, with their horses taken to the castle, and the corn was taken to "her majesty's mills", where it was ground and tolls were paid. Eventually the millers were set free. On another occasion, Rolleston's miller was detained by Edward Earl of Rutland, but was released when he promised not to collect any more corn from Newark. There seems to have been less of an issue when the inhabitants of Newark took their corn to the mills voluntarily.[9]

The Willoughby family, who lived at Wollaton Hall ran a fleet of barges in the 1580s, and delivered coal to Southwell,[10] which Caffyn has taken to mean that the river was navigable for the first 4 miles (6.4 km) to enable this to happen.[11] Those who lived beside the river had a responsibility to keep it scoured, and on 13 July 1642 the residents of Rolleston, Southwell and Upton were indicted for not carrying out this duty.[9]

Ecology

The upper reaches of the river contain fish such as brown trout (Salmo trutta), but although coarse fish species can be found lower down, the modifications made to the channel to assist its land-drainage function have resulted in the habitat suffering, with a result that fish numbers are low. The Environment Agency, who manage the river, have applied a "Hands-Off Flow" limit to the river, which specifies that if the flow drops below 2650 Megalitres per day (Mld) in the Trent, all abstraction of water must cease, in order to protect the environment. The volume of groundwater extracted from the catchment has fallen in recent years, with the result that water levels have risen a little.[12]

Catches of Atlantic salmon (Salmo salar) have also been reported on the river.

The Environment Agency measure the water quality in the river systems of England. Each is given an overall ecological status, which may be one of five levels: high, good, moderate, poor and bad. There are several components that are used to determine this, including biological status, which looks at the quantity and varieties of invertebrates, angiosperms and fish, and chemical status, which compares the concentrations of various chemicals against known safe concentrations. Chemical status is rated good or fail.[13]

The water quality of the Greet and its tributaries was as follows in 2015.

SectionEcological StatusChemical StatusOverall StatusLengthCatchment
Halloughton Dumble Catchment (trib of Greet)[14] style="background: #ffff99; text-align: center;" | Moderate style="background: #7af58a; text-align: center;" | Good style="background: #ffff99; text-align: center;" | Moderate 7.5 miles (12.1 km) 6.53 square miles (16.9 km2)
Greet Catchment (trib of Trent)[15] style="background: #ffd784; text-align: center;" | Poor style="background: #7af58a; text-align: center;" | Good style="background: #ffd784; text-align: center;" | Poor 10.2 miles (16.4 km) 24.39 square miles (63.2 km2)

The water quality of the Greet has deteriorated since 2009, when the ecological and overall status were moderate, but has improved on the Halloughton Dumble, where it was bad.

Points of interest

Bibliography

  • Caffyn, Douglas John Morris (August 2010). "River Transport 1189 - 1600 (PhD thesis)" (PDF). University of Sussex.
  • Environment Agency (March 2008). "The Lower Trent and Erewash CAMS" (PDF). Environment Agency. Archived from the original (PDF) on 14 March 2012.CS1 maint: ref=harv (link)
  • Longhurst, E H S (1931). "A short history of Rolleston".CS1 maint: ref=harv (link)
  • Marsh, T J; Hannaford, J (2008). UK Hydrometric Register. Hydrological data UK series (PDF). Centre for Ecology & Hydrology. Archived from the original (PDF) on 31 October 2014.CS1 maint: ref=harv (link)
  • Stone, Richard (2005). The River Trent. Chichester: Phillimore & Co Ltd. ISBN 978-1-86077-356-3.CS1 maint: ref=harv (link)

References

gollark: This is underspecified because bee² you, yes.
gollark: All numbers are two's complement because bee you.
gollark: The rest of the instruction consists of variable-width (for fun) target specifiers. The first N target specifiers in an operation are used as destinations and the remaining ones as sources. N varies per opcode. They can be of the form `000DDD` (pop/push from/to stack index DDD), `001EEE` (peek stack index EEE if source, if destination then push onto EEE if it is empty), `010FFFFFFFF` (8-bit immediate value FFFFFFFF; writes are discarded), `011GGGGGGGGGGGGGGGG` (16-bit immediate value GGGGGGGGGGGGGGGG; writes are also discarded), `100[H 31 times]` (31-bit immediate because bee you), `101IIIIIIIIIIIIIIII` (16 bits of memory location relative to the base memory address register of the stack the operation is conditional on), `110JJJJJJJJJJJJJJJJ` (16 bit memory location relative to the top value on that stack instead), `1111LLLMMM` (memory address equal to base memory address of stack LLL plus top of stack MMM), or `1110NNN` (base memory address register of stack MMM).Opcodes (numbered from 0 in order): MOV (1 source, as many destinations as can be parsed validly; the value is copied to all of them), ADD (1 destination, multiple sources), JMP (1 source), NOT (same as MOV), WR (write to output port; multiple sources, first is port number), RE (read from input port; one source for port number, multiple destinations), SUB, AND, OR, XOR, SHR, SHL (bitwise operations), MUL, ROR, ROL, NOP, MUL2 (multiplication with two outputs).
gollark: osmarksISA™️-2028 is a VLIW stack machine. Specifically, it executes a 384-bit instruction composed of 8 48-bit operations in parallel. There are 8 stacks, for safety. Each stack also has an associated base memory address register, which is used in some "addressing modes". Each stack holds 64-bit integers; popping/peeking an empty stack simply returns 0, and the stacks can hold at most 32 items. Exceeding a stack's capacity is runtime undefined behaviour. The operation encoding is: `AABBBCCCCCCCCC`:A = 2-bit conditional operation mode - 0 is "run unconditionally", 1 is "run if top value on stack is 0", 2 is "run if not 0", 3 is "run if first bit is ~~negative~~ 1".B = 3-bit index for the stack to use for the conditional.C = 9-bit opcode (for extensibility).
gollark: By "really fast", I mean "in a few decaminutes, probably".
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.