River Beane

The River Beane is a short river in the county of Hertfordshire, England. A tributary of the River Lea, it rises to the south-west of Sandon in the hills northeast of Stevenage and joins the Lea at Hartham Common in Hertford.

Beane
Weir on the River Beane, Hartham Common
Location
CountryUnited Kingdom
Physical characteristics
Source 
 • locationNr. Sandon, Hertfordshire
 • elevation90 m (300 ft)
Mouth 
 • location
Hertford, Hertfordshire
into River Lea
Length17.8 km (11.1 mi)

Watermills

In medieval times there were a number of watermills along the course of the Beane. A few of the buildings and mill races survive.

  • Sele Mill, Hertford, is perhaps the site with the most historical interest. It was mentioned in the Domesday Book.[1] Its main claim to fame is that in the 15th century the facility was converted for use as a paper mill and was, as far as is known, the earliest paper mill in England. It is not clear when paper production began there, although 1488 has been suggested,[2] but it was certainly underway in the 1490s. Paper from Sele Mill, supplied by John Tate, was used in publications from that decade, and the mill was visited by Henry VII in 1498 and 1499. Despite this sign of royal favour, paper production did not continue there for long, and appears to have ceased by the time the paper maker John Tate made his will in 1507.[3]
  • Walkern Mill, which was rebuilt in the 19th century, is a grade II listed building.[4]

Abstraction

The Beane valley remains mainly rural in character. However, Hertfordshire's population increased substantially in the second half of the twentieth century, and the consequent demand for water has affected rivers such as the Beane and the Mimram. In the case of the Beane, a licence was given to abstract water near Aston for Stevenage's water supply. The river has since been adversely affected by over-exploitation of the chalk aquifer in its upper reaches.

The photo shows a dry section south of Walkern where from the 1990s until about 2014 there was only seasonal flow. An indication of the scale of the decline in flow is that the section at Walkern was once big enough to power a watermill and to support watercress beds.[4]

Dry bed of the Beane near Aston, Hertfordshire in 2006

The lower Beane is more robust and there has continued to be regular flow through Watton-at-Stone, Stapleford and Waterford until the confluence with the River Lea. However, overall the river has performed badly in assessments by the Environment Agency of flow level.

Restoration

The state of the upper Beane resulted in calls for the river's restoration.[5] The management plan for the river includes the objective that there is adequate flow along the length of the river to support a ‘good status’ chalk stream ecology (as defined by the European Union's Water Framework Directive). [6]

One possible approach to the restoration of the upper Beane which was discussed was to use recycled water from sewage treatment works. Sewage from the Stevenage area bypassed the river, being pumped down the Beane valley to Rye Meads near Hertford for treatment and eventual discharge into the River Stort. However, the water could theoretically have been discharged into the Beane if treated further upstream.[7] In the event another option was chosen. Affinity Water was told to take less water from its pumping station near Aston, even though obtaining water from a less environmentally damaging source was difficult as the River Lea's catchment area as a whole is under pressure.

There have been initiatives to improve the condition of lower stretches of the river, for example where it passes through the Woodhall Park estate near Watton. Here the river has been modified by an 18th-century landscaping project which had the adverse consequence of impeding fish passage.[8]

Access

Herts and Middlesex Wildlife Trust (HMWT) has launched a circular trail at Waterford, which includes some scenic sections of the River Beane.

gollark: The advantage of XTMF is that your tapes would be playable by any compliant program for playback, and your thing would be able to read tapes from another program.
gollark: Tape Shuffler would be okay with it, Tape Jockey doesn't have the same old-format parsing fallbacks and its JSON handling likely won't like trailing nuls, no idea what tako's program thinks.
gollark: Although I think some parsers might *technically* be okay with you reserving 8190 bytes for metadata but then ending it with a null byte early, and handle the offsets accordingly, I would not rely on it.
gollark: Probably. The main issue I can see is that you would have to rewrite the entire metadata block on changes, because start/end in XTMF are offsets from the metadata region's end.
gollark: I thought about that, but:- strings in a binary format will be about the same length- integers will have some space saving, but I don't think it's very significant- it would, in a custom one, be harder to represent complex objects and stuff, which some extensions may be use- you could get some savings by removing strings like "title" which XTMF repeats a lot, but at the cost of it no longer being self-describing, making extensions harder and making debugging more annoying- I am not convinced that metadata size is a significant issue

References
  1. SELE HOUSE including front railings (1268844). Historic England
  2. "Sele Mill". Open Plaques. Retrieved 23 June 2015.
  3. Richard L. Hills, ‘Tate, John (c.1448–1507/8)’, Oxford Dictionary of National Biography, Oxford University Press, 2004; online edn, Jan 2008 accessed 24 June 2015. Subscription or UK public library membership required.
  4. Walkern Mill
  5. "Campaigners in walk along dry River Beane". Hertfordshire Mercury. 2012. Retrieved 10 June 2016.
  6. River Beane: Catchment management plan www.riverleacatchment.org.uk
  7. Waste Water Report, Halcrow Group
  8. "Broadwater and River Beane renovation". Woodhall Estate. 2018. Retrieved 3 March 2019.

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.