PWS-11

The PWS-11 was a Polish aerobatic and trainer aircraft, developed in 1928-1929 by PWS (Podlaska Wytwórnia Samolotów - Podlasie Aircraft Factory), which remained a prototype.

PWS-11
PWS-11SM
Role Trainer aircraft
Manufacturer PWS
First flight 1929
Status prototype
Number built 2

Design and development
PWS-11bis

In parallel with development of a fighter aircraft, the PWS-10, the design team of Aleksander Grzędzielewski and Augustyn Bobek-Zdaniewski from the PWS factory, started work on an intermediate aircraft for training fighter pilots. Like the PWS-10, the new plane was of a parasol wing configuration, but the shape of the fuselage, wings and empennage were similar to a liaison aircraft, the PWS-5 of the same designers and powered by the same engine. In 1929, the Aviation Department of the Polish War Ministry ordered the prototypes and an airframe for static tests. The plane was initially known as PWS-11SM, for szkolno-myśliwski (fighter/trainer).[1]

The first prototype of the PWS-11 was flown in November 1929 at Biała Podlaska by Franciszek Rutkowski. Its handling characteristics were lacking and as a result, its empennage underwent several modifications. The second prototype of 1930, designated the PWS-11bis was much improved. The rectangular section fuselage was replaced by an oval one and an engine was fitted with a Townend ring. After further changes to the empennage and Townend ring, the aircraft was then highly maneuverable and was found satisfactory. The Air Force however was not interested and the plane was not built in series.[1]

Operational history

The second prototype PWS-11bis received a registration number SP-ADS and was used for aerobatics, flown by Col. J. Kossowski, among others.[1]

Construction

The PWS-11 was a single-seater parasol wing monoplane of wooden construction. The framed fuselage had a skin made of plywood (PWS-11) or aircraft fabric on wood strips (PWS-11bis), except for the engine compartment which was covered with duralumin sheeting. The rectangular wooden wings had two spars, which were covered with fabric and plywood and were supported by twin struts. The empennage was wooden, with the fixed surfaces plywood covered and fabric on the control surfaces. The pilot sat in an open cockpit, protected by a windshield. The undercarriage consisted of a fixed common axle conventional landing gear, with a rear skid. Fuel was carried in a 170 l tank mounted in the fuselage, forward of the pilot's cockpit.[1]

The 9-cylinder Skoda-Wright Whirlwind J-5B air-cooled radial engine was built under licence in the Polish Skoda Works, giving a nominal power of 220 hp (164 kW) and take-off power of 240 hp (179 kW), driving a two-blade fixed pitch wooden propeller. A cruise fuel consumption was 48 l/h.[1]

Specification (PWS-11bis)

Data from Glass, A. (1977), p.194

General characteristics

  • Crew: 1
  • Length: 6.65 m ()
  • Wingspan: 9 m ()
  • Height: 2.44 m ()
  • Wing area: 15.00 m2 (ft2)
  • Empty weight: 666 kg ()
  • Useful load: 268 kg ()
  • Loaded weight: 934 kg ()
  • Powerplant: 1 × Skoda-Wright Whirlwind J-5B air-cooled 9-cylinder radial 2 blade fixed pitch, 220 hp (164 kW)

Performance

Notes
  1. Glass, A. (1977)
gollark: *cough*generics*cough*
gollark: I agree with the Go thing. It seems to be designed so that you can pick it up quickly, but also seems to have the mentality that the people actually using it (as opposed to the implementors) can't be trusted with any advanced features.
gollark: People *use* LISPs?
gollark: I still don't like it. It's just less bad.
gollark: They only seem to put windows on the left of cases for some annoying reason.

See also

Related development

Aircraft of comparable role, configuration and era

References
  • Glass, Andrzej (1977). Polskie konstrukcje lotnicze 1893-1939 [Polish aviation designs 1893-1939] (in Polish). Warsaw: WKiŁ. pp. 192–194.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.