MAN SL202

The MAN SL202 was a single-decker bus manufactured by MAN in Salzgitter, Germany between 1983 and 1993. It was also available as a chassis for external bodywork.

MAN SL202
Stadtbus Nürnberg MAN SL202
Overview
ManufacturerMAN
Production1983–1993
AssemblySalzgitter, Germany
Body and chassis
Doors1 or 2
Floor typeStep entrance
Powertrain
EngineD2566UH 147 kW (200 PS; 197 bhp)
D2566UH 155 kW (211 PS; 208 bhp)
D2866UH 177 kW (241 PS; 237 bhp)
D2866UH 180 kW (245 PS; 241 bhp)
TransmissionRenk Doromat Series
Voith DIWA 851/854.2
ZF Ecomat ZF 4HP500
ZF Ecomat ZF 5HP500
Dimensions
Length11.1 metres (36.4 ft)
11.7 metres (38.4 ft)
12.2 metres (40.0 ft)
Width2.5 metres (8 ft 2.4 in)
Height3.2 metres (10.5 ft)
Chronology
PredecessorMAN SL200
SuccessorMAN NL202

History

The MAN SL202 succeeded the MAN SL200 in 1983.[1]

The SL202 came with a wide choice of transmissions, from three and four-speed Renk Doromat automatic transmissions, to three and four-speed Voith DIWA transmissions, to four and five-speed ZF Ecomat 4HP500 or 5HP500 transmissions. One to date has been retro-fitted with an Allison World Series B300R4 transmission, creating a largely noticeable increase in performance against similar examples with the three-speed Voith DIWA transmission.

The internal combustion engines used in the SL202 were replaced around 1990, from older, smaller, 2566 series engines to newer, larger, 2866 series engines. The majority of pre-1990 SL202s have a 155 kilowatts (211 PS; 208 bhp) D2566UH engine, developing about 755 newton metres (557 lbf⋅ft) of torque at 1,400 rpm. These D2566 engines have a capacity of 11.413 litres (696.5 cu in) and max out at 2,200 rpm. This same engine was used for the SL200 and is similar in design to that of the OM407h engine used in the Mercedes-Benz O305.

Post-1990 SL202s have the D2866 engine, with higher power and torque figures. These engines have a capacity of 11.967 litres (730.3 cu in) and maximum output at 2,200 rpm, the design is similar to the OM447h engine of the Mercedes-Benz O405.

Much of the design was used in the North American version of the SL202, the MAN Americana SL40-102. The SL202 was superseded by the MAN NL202.

Operators

The MAN SL202 was mainly sold in Germany. The chassis version was sold in Australia and New Zealand.

Australia

Sydney Buses purchased 50 Pressed Metal Corporation bodied SL202s in 1989/80,[2] while the State Transport Authority, Adelaide took delivery of 125 Pressed Metal Corporation Australia bodied examples between 1992 and 1996.[3][4]

The Brisbane City Council purchased two[5] while Darwinbus purchased five.

New Zealand

The Auckland Regional Council purchased 69 SL202s, Christchurch Transport Board 57, New Plymouth City Transit six and Wellington City Council 30.[6] New Zealand Coach Service purchased 11 SL202s between 1986 and 1988.[7]

gollark: Sure it would, just say each thing has a specific size and raycast.
gollark: An "anti-reddit spam language" or something?
gollark: That is an interesting idea actually, yes.
gollark: In what language?
gollark: Maybe you could make some sort of fancy tool to automatically try and flatten stuff into fewer dimensions. Although this *may* be somewhat impossible.

References

  1. Easy access to MAN newcomer Commercial Motor 8 December 1988
  2. State Transit Authority Disposal Lists Australian Bus Fleet Lists
  3. MAN delivers first Adelaide bus Truck & Bus Transportation June 1992 page 97
  4. TransAdelaide Australian Bus Fleet Lists
  5. Volgren MAN SL202 Brisbane Transport Buses
  6. MAN SL202 Buses Omnibus Society of New Zealand
  7. New Zealand Coach Service Australian Bus Fleet Lists

Media related to MAN SL 202 at Wikimedia Commons

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.