IMT Advanced
International Mobile Telecommunications-Advanced (IMT-Advanced Standard) are the requirements issued by the ITU Radiocommunication Sector (ITU-R) of the International Telecommunication Union (ITU) in 2008 for what is marketed as 4G (or sometimes as 4.5G[1][2][3]) mobile phone and Internet access service.
Part of a series on the |
Mobile phone generations |
---|
Mobile telecommunications |
Description
An IMT-Advanced system is expected to provide a comprehensive and secure all-internet protocol based mobile broadband solution to laptop computer wireless modems, smartphones, and other mobile devices. Facilities such as ultra-broadband Internet access, voice over IP, gaming services, and streamed multimedia may be provided to users.
IMT-Advanced is intended to accommodate the quality of service (QoS) and rate requirements set by further development of existing applications like mobile broadband access, Multimedia Messaging Service (MMS), video chat, mobile TV, but also new services like high-definition television (HDTV). 4G may allow roaming with wireless local area networks, and may interact with digital video broadcasting systems. It was meant to go beyond the International Mobile Telecommunications-2000 requirements, which specify mobile phones systems marketed as 3G.
Requirements
Specific requirements of the IMT-Advanced report included:
- Based on an all-IP packet switched network.[4]
- Interoperability with existing wireless standards.[5]
- A nominal data rate of 100 Mbit/s while the client physically moves at high speeds relative to the station, and 1 Gbit/s while the client and station are in relatively fixed positions.[6]
- Dynamically share and use network resources to support more simultaneous users per cell.
- Scalable channel bandwidth 5–20 MHz, optionally up to 40 MHz[7][8]
- Peak link spectral efficiency of 15 bit/s/Hz in the downlink and 6.75 bit/s/Hz in the uplink (meaning that 1 Gbit/s in the downlink should be possible over less than 67 MHz bandwidth)
- System spectral efficiency of up to 3 bit/s/Hz/cell in the downlink and 2.25 bit/s/Hz/cell for indoor usage[7]
- Seamless connectivity and global roaming across multiple networks with smooth handovers[4][9]
- Ability to offer high quality of service for multimedia support
The first set of 3GPP requirements on LTE Advanced was approved in June 2008.[10]
A summary of the technologies that have been studied as the basis for LTE Advanced is included in a technical report.[11]
While the ITU adopts requirements and recommendations for technologies that would be used for future communications, they do not actually perform the development work themselves, and countries do not consider them binding standards. Other trade groups and standards bodies such as the Institute of Electrical and Electronics Engineers, the WiMAX Forum, and 3GPP also have a role.
Principal technologies
Physical layer transmission techniques expected to be used include:[12]
- MIMO: To attain ultra high spectral efficiency by means of spatial processing including multi-antenna and multi-user MIMO
- Frequency-domain-equalization, for example "multi-carrier modulation" (OFDM) in the downlink or "single-carrier frequency-domain-equalization" (SC-FDE) in the uplink: To exploit the frequency selective channel property without complex equalization.
- Frequency-domain statistical multiplexing, for example (OFDMA) or (single-carrier FDMA) (SC-FDMA, Linearly precoded OFDMA, LP-OFDMA) in the uplink: Variable bit rate by assigning different sub-channels to different users based on the channel conditions
- Turbo principle error-correcting codes: To minimize the required signal-to-noise ratio at the reception side
- Channel-dependent scheduling: To utilize the time-varying channel.
- Link adaptation: Adaptive modulation and error-correcting codes.
- Relaying, including fixed relay networks, and the cooperative relaying concept, known as multi-mode protocol.
Predecessors
Long Term Evolution
Long Term Evolution (LTE) has a theoretical net bitrate maximum capacity of 100 Mbit/s in the downlink and 50 Mbit/s in the uplink if a 20 MHz channel is used. The capacity is more if a MIMO (multiple-input and multiple-output) antenna array is used. The physical radio interface was at an early stage named "High Speed Orthogonal Packet Access" and is now named E-UTRA.
The CDMA's spread spectrum radio technology that was used in 3G systems and cdmaOne has been abandoned. It was replaced by orthogonal frequency-division multiple access and other frequency-division multiple access schemes. This is combined with MIMO antenna arrays, dynamic channel allocation, and channel-dependent scheduling.
The first publicly available LTE services were branded "4G" and opened in Sweden's capital city Stockholm (Ericsson system) and Norway's capital city Oslo (a Huawei system) on 14 December 2009. The user terminals were manufactured by Samsung.[13] All four major U.S. wireless carriers offer LTE services.
In South Korea, SK Telecom and LG U+ have enabled access to LTE service since July 2011 for data devices, slated to go nationwide by 2012.[14]
Mobile WiMAX (IEEE 802.16e)
The Mobile WiMAX (IEEE 802.16e-2005) mobile wireless broadband access (MWBA) standard (marketed as WiBro in South Korea) is sometimes branded 4G, and offers peak data rates of 128 Mbit/s downlink and 56 Mbit/s uplink over 20 MHz wide channels.
The first commercial mobile WiMAX service was opened by KT in Seoul, South Korea in June 2006.[15]
In September 2008, Sprint Nextel marketed Mobile WiMAX as a "4G" network even though it did not fulfil the IMT Advanced requirements.[16]
In Russia, Belarus, and Nicaragua, WiMax broadband internet access is offered by the Russian company Scartel and is also branded 4G, Yota.
WiMAX | |
---|---|
Peak download | 128 Mbit/s |
Peak upload | 56 Mbit/s |
Ultra Mobile Broadband
Ultra Mobile Broadband (UMB) was the brand name for a discontinued 4G project within the 3GPP2 standardization group to improve the CDMA2000 mobile phone standard for next generation applications and requirements. In November 2008, Qualcomm, UMB's lead sponsor, announced it was ending development of the technology, favouring LTE instead.[17] The objective was to achieve data speeds over 275 Mbit/s downstream and over 75 Mbit/s upstream.
Flash-OFDM
At an early stage the Flash-OFDM system was expected to be further developed into a 4G standard.
iBurst and MBWA
The iBurst technology, using High Capacity Spatial Division Multiple Access (HC-SDMA), was at an early stage considered as a 4G predecessor. It was incorporated by the Mobile Broadband Wireless Access (MBWA) working group into the IEEE 802.20 standard in 2008.[18]
Candidate systems
In October 2010, ITU-R Working Party 5D approved two industry-developed technologies.[19] On December 6, 2010, ITU noted that while current versions of LTE, WiMax and other evolved 3G technologies do not fulfill IMT-Advanced requirements for 4G, some may use the term "4G" in an "undefined" fashion to represent forerunners to IMT-Advanced that show "a substantial level of improvement in performance and capabilities with respect to the initial third generation systems now deployed."[20]
LTE Advanced
LTE Advanced (Long-term-evolution Advanced) was formally submitted by the 3GPP organization to ITU-T in the fall 2009, and was released in 2011. The target of 3GPP LTE Advanced was to reach and surpass the ITU requirements.[21] LTE Advanced is an improvement on the existing LTE network. Release 10 of LTE is expected to achieve the LTE Advanced speeds. Release 8 in 2009 supported up to 300 Mbit/s download speeds which was still short of the IMT-Advanced standards.[22]
WiMAX Release 2 (IEEE 802.16m)
The WirelessMAN-Advanced evolution of IEEE 802.16e was published in May 2011 as standard IEEE 802.16m-2011. The relevant industry promoting the technology gave it the marketing name of WiMAX Release 2. It had an objective to fulfill the IMT-Advanced criteria.[23][24] The IMT-Advanced group formally approved this technology as meeting its criteria in October 2010.[25] In the second half of 2012, the 802.16m-2011 standard was rolled up into the 802.16-2012 standard, excluding the WirelessMAN-Advanced radio interface part of the 802.16m-2011 standard, which got moved to IEEE Std 802.16.1-2012.
Comparison
The following table shows a comparison of IMT-Advanced candidate systems as well as other competing technologies.
Common Name | Family | Primary Use | Radio Tech | Downstream (Mbit/s) | Upstream (Mbit/s) | Notes |
---|---|---|---|---|---|---|
HSPA+ | 3GPP | Mobile Internet | CDMA/TDMA/FDD MIMO | 21 42 84 672 | 5.8 11.5 22 168 | HSPA+ is widely deployed. Revision 11 of the 3GPP states that HSPA+ is expected to have a throughput capacity of 672 Mbit/s. |
LTE | 3GPP | Mobile Internet | OFDMA/TDMA/MIMO/SC-FDMA/for LTE-FDD/for LTE-TDD | 100 Cat3 150 Cat4 300 Cat5 (in 20 MHz FDD) [26] | 50 Cat3/4 75 Cat5 (in 20 MHz FDD)[26] | LTE-Advanced update expected to offer peak rates up to 1 Gbit/s fixed speeds and 100 Mb/s to mobile users. |
WiMax rel 1 | 802.16 | WirelessMAN | MIMO-SOFDMA | 37 (10 MHz TDD) | 17 (10 MHz TDD) | With 2x2 MIMO.[27] |
WiMax rel 1.5 | 802.16-2009 | WirelessMAN | MIMO-SOFDMA | 83 (20 MHz TDD) 141 (2x20 MHz FDD) | 46 (20 MHz TDD) 138 (2x20 MHz FDD) | With 2x2 MIMO.Enhanced with 20 MHz channels in 802.16-2009[27] |
WiMAX rel 2.0 | 802.16m | WirelessMAN | MIMO-SOFDMA | 2x2 MIMO 110 (20 MHz TDD) 183 (2x20 MHz FDD) 4x4 MIMO 219 (20 MHz TDD) 365 (2x20 MHz FDD) | 2x2 MIMO 70 (20 MHz TDD) 188 (2x20 MHz FDD) 4x4 MIMO 140 (20 MHz TDD) 376 (2x20 MHz FDD) | Also, low mobility users can aggregate multiple channels to get a download throughput of up to 1 Gbit/s[27] |
Flash-OFDM | Flash-OFDM | Mobile Internet mobility up to 200 mph (350 km/h) | Flash-OFDM | 5.3 10.6 15.9 | 1.8 3.6 5.4 | Mobile range 30 km (18 miles) Extended range 55 km (34 miles) |
HIPERMAN | HIPERMAN | Mobile Internet | OFDM | 56.9 | ||
Wi-Fi | 802.11 (11n) | Wireless LAN | OFDM/CSMA/MIMO/Half Duplex | 288.8 (using 4x4 configuration in 20 MHz bandwidth) or 600 (using 4x4 configuration in 40 MHz bandwidth) |
Antenna, RF front end enhancements and minor protocol timer tweaks have helped deploy long range P2P networks compromising on radial coverage, throughput and/or spectra efficiency (310 km & 382 km) | |
iBurst | 802.20 | Mobile Internet | HC-SDMA/TDD/MIMO | 95 | 36 | Cell Radius: 3–12 km Speed: 250 km/h Spectral Efficiency: 13 bits/s/Hz/cell Spectrum Reuse Factor: "1" |
EDGE Evolution | GSM | Mobile Internet | TDMA/FDD | 1.6 | 0.5 | 3GPP Release 7 |
UMTS W-CDMA HSPA (HSDPA+HSUPA) |
UMTS/3GSM | Mobile Internet | CDMA/FDD CDMA/FDD/MIMO | 0.384 14.4 | 0.384 5.76 | HSDPA is widely deployed. Typical downlink rates today 2 Mbit/s, ~200 kbit/s uplink; HSPA+ downlink up to 56 Mbit/s. |
UMTS-TDD | UMTS/3GSM | Mobile Internet | CDMA/TDD | 16 | Reported speeds according to IPWireless using 16QAM modulation similar to HSDPA+HSUPA | |
EV-DO Rel. 0 EV-DO Rev.A EV-DO Rev.B |
CDMA2000 | Mobile Internet | CDMA/FDD | 2.45 3.1 4.9xN | 0.15 1.8 1.8xN | Rev B note: N is the number of 1.25 MHz carriers used. EV-DO is not designed for voice, and requires a fallback to 1xRTT when a voice call is placed or received. |
Notes: All speeds are theoretical maximums and will vary by a number of factors, including the use of external antennas, distance from the tower and the ground speed (e.g. communications on a train may be poorer than when standing still). Usually the bandwidth is shared between several terminals. The performance of each technology is determined by a number of constraints, including the spectral efficiency of the technology, the cell sizes used, and the amount of spectrum available. For more information, see Comparison of wireless data standards.
For more comparison tables, see bit rate progress trends, comparison of mobile phone standards, spectral efficiency comparison table and OFDM system comparison table.
References
- http://www.turkcell.com.tr/tr/4-5g
- https://bireysel.turktelekom.com.tr/4-5G/index.html
- http://www.vodafone.com.tr/Internet/vodafone-4-5g.php#45gnedir
- Werner Mohr (2002). "Mobile Communications Beyond 3G in the Global Context" (PDF). Siemens mobile. Retrieved 26 March 2007.
- Noah Schmitz (March 2005). "The Path To 4G Will Take Many Turns". Wireless Systems Design. Retrieved 26 March 2007.
- Kim Young Kyun; Prasad, Ramjee (2006). 4G Roadmap and Emerging Communication Technologies. Artech House 2006. pp. 12–13. ISBN 1-58053-931-9.
- "Report M.2134: Requirements related to technical performance for IMT-Advanced radio interface(s)". ITU-R. November 2008. Retrieved 25 August 2011.
- Moray Rumney, "IMT-Advanced: 4G Wireless Takes Shape in an Olympic Year", Agilent Measurement Journal, September 2008 Archived 17 January 2016 at the Wayback Machine
- Sadia Hussain; Zara Hamid; Naveed S. Khattak (30–31 May 2006). Mobility management challenges and issues in 4G heterogeneous networks. The first international conference on integrated internet ad hoc and sensor networks InterSense '06. Nice, France: Association for Computing Machinery. doi:10.1145/1142680.1142698.CS1 maint: date format (link)
- 3GPP specification: Requirements for further advancements for E-UTRA (LTE Advanced)
- 3GPP Technical Report: Feasibility study for Further Advancements for E-UTRA (LTE Advanced)
- G. Fettweis; E. Zimmermann; H. Bonneville; W. Schott; K. Gosse; M. de Courville (2004). "High Throughput WLAN/WPAN" (PDF). WWRF. Archived from the original (PDF) on 16 February 2008.
- "Light Reading Mobile - 4G/LTE — Ericsson, Samsung Make LTE Connection — Telecom News Analysis". unstrung.com. Retrieved 24 March 2010.
- Dante Cesa (5 July 2011). "SK Telecom and LG U+ launch LTE in Seoul, fellow South Koreans seethe with envy". Engadget. Retrieved 25 August 2011.
- "South Korea launches WiBro service". EE Times. 30 June 2006. Retrieved 23 June 2010.
- "Sprint announces seven new WiMAX markets, says 'Let AT&T and Verizon yak about maps and 3G coverage'". Engadget. 23 March 2010. Retrieved 8 April 2010.
- Qualcomm halts UMB project, Reuters, November 13th, 2008
- IEEE Standard for Local and metropolitan area networks — Part 20: Air Interface for Mobile Broadband Wireless Access Systems Supporting Vehicular Mobility — Physical and Media Access Control Layer Specification (PDF). Official standard document. IEEE Standards Association. August 29, 2008. ISBN 978-0-7381-5766-5.
- "ITU paves way for next-generation 4G mobile technologies". News release. October 21, 2010. Retrieved August 25, 2011.
- "ITU World Radiocommunication Seminar highlights future communication technologies".
- Parkvall, Stefan; Dahlman, Erik; Furuskär, Anders; Jading, Ylva; Olsson, Magnus; Wänstedt, Stefan; Zangi, Kambiz (21–24 September 2008). LTE Advanced – Evolving LTE towards IMT-Advanced (PDF). Vehicular Technology Conference Fall 2008. Stockholm: Ericsson Research. Archived from the original (PDF) on 7 March 2012. Retrieved 26 November 2010. External link in
|publisher=
(help) - Stefan Parkvall; David Astely (April 2009). "The Evolution of LTE towards IMT-Advanced". Journal of Communications. 4 (3): 146–154. doi:10.4304/jcm.4.3.146-154. Archived from the original on August 10, 2011. Retrieved August 25, 2011.
- "Draft IEEE 802.16m System Description Document" (PDF). IEEE WirelessMAN-Advanced workgin group. April 30, 2008. Retrieved August 25, 2011.
- "IEEE Approves IEEE 802.16m - Advanced Mobile Broadband Wireless Standard". News release. IEEE Standards Association. March 31, 2011. Retrieved August 20, 2011.
- Archived January 27, 2012, at the Wayback Machine
- "LTE". 3GPP web site. 2009. Retrieved August 20, 2011.
- "WiMAX and the IEEE 802.16m Air Interface Standard" (PDF). WiMax Forum. 4 April 2010. Retrieved 2012-02-07.