Emerson railway station

Emerson railway station is located on the Seaford and Tonsley lines.[1] Situated in the inner south-western Adelaide suburb of Black Forest, it is 7.1 kilometres from Adelaide station.

Emerson
LocationSouth Road
Black Forest
Line(s)Seaford Line, Tonsley Line
Distance7.1 km from Adelaide
Platforms2
Bus routes100 Circle Line
719 to Flinders University
720 to Old Reynella Interchange
Construction
ParkingNo
Bicycle facilitiesNo
History
Opened1928
Services
Preceding station   Adelaide Metro   Following station
toward Adelaide
Seaford line
toward Seaford
Tonsley line
toward Tonsley

History

Passenger trains first stopped at Emerson Station on Monday, July 16, 1928. At that stage, all passenger trains stopped for the purpose of allowing passengers to join or alight, except those travelling to and from Willunga.[2] Initially the station's name raised some criticism due to its perceived similarity to nearby Edwardstown railway station and the potential confusion that could result.[3]

The road intersection immediately south of Emerson railway station was a complex junction of the railway and major connector roads, South Road and Cross Road. Debate occurred during planning for the duplication of the then Brighton Line in 1949, that a level crossing should be avoided due to the expected resulting congestion and an overhead railway bridge was proposed by the Highways Department.[4]

In September 1952, a conference was held to discuss the Emerson Rail Crossing where once again a grade separation was proposed via an overland bridge or a subway.[5] A bridge was not built at this stage, with automatic gates being installed instead with coordinating traffic lights.[6] Between 1982 and 1984 a road overpass (Emerson Crossing) was built for South Road, which had then become a major arterial road.[7]

In July 2008 Emerson station became the first station to install a Caution More than One Train (CMToT) warning device. The device activates when there are two trains in the vicinity by sounding an alarm and lighting up the warning message where people cross at the pedestrian maze. The installation of the CMToT warning device was as a result of incidents and many near misses where pedestrians were walking behind one train and not being alert to a second train coming from the other direction.[8]

Services by platform
Platform Destination/s
1 Seaford/Tonsley
2 Adelaide
gollark: Interesting. Why is LyricTech™ poor if access to trans-temporal messaging is available exactly?
gollark: How do you do cluster computing for apiomagnetic system simulation?
gollark: Yes.
gollark: The original brain scanee gets a yearly gift basket to show our appreciation.
gollark: Then execute them at 100x speed (and many instances at once) on parallel processing clusters.

References
  1. Seaford & Tonsley timetable Adelaide Metro 20 July 2014
  2. Bowkett, C. (16 July 1928). "Opening Station at Emerson (Willunga Line)". The Advertiser. Retrieved 31 May 2015.
  3. "Confusing Names". The Register. 16 October 1928. Retrieved 31 May 2015.
  4. "Emerson Railway Bridge - Crossing "Would Hold Up Traffic"". The Advertiser. 1 December 1949. Retrieved 31 May 2015.
  5. "Conference on Emerson Rail Crossing". The Advertiser. 27 September 1952. Retrieved 31 May 2015.
  6. "Gates for Emerson Rail Crossing". The Advertiser. 4 October 1952. Retrieved 31 May 2015.
  7. "Emerson Crossing Collection". State Library of South Australia. State Library of South Australia. Retrieved 31 May 2015.
  8. Level crossing black spot partnership Premier of Australia 24 July 2008

Media related to Emerson railway station at Wikimedia Commons

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.