Drive wheel
A drive wheel is a wheel of a motor vehicle that transmits force, transforming torque into tractive force from the tires to the road, causing the vehicle to move. The powertrain delivers enough torque to the wheel to overcome stationary forces, resulting in the vehicle moving forwards or backwards.[1][2]
.jpg)
A two-wheel drive vehicle has two driven wheels, typically both at the front or back, while a four-wheel drive has four.
A steering wheel is a wheel that turns to change the direction of a vehicle. A trailer wheel is one that is neither a drive wheel, nor a steer wheel. Front-wheel drive vehicles typically have the rear wheels as trailer wheels.
Drive wheel configurations
Front-wheel drive
Front-wheel drive (FWD) vehicles' engines drive the front wheels. Using the front wheels for delivery of power as well as steering allows the driving force to act in the same direction as the wheel is pointing.[3] This layout is commonly used in modern passenger cars.
A rare example of front wheel drive was the Opperman Motocart. This slow-speed agricultural and light freight vehicle was a tricycle with the front wheel carrying a large tractor tyre. The wheel was powered by a small single cylinder Douglas engine carried on the front mono fork that formed the steering gear.
See also Front-engine, front-wheel drive layout.
Rear-wheel drive
Rear-wheel drive (RWD) typically places the engine in the front of the vehicle, with a driveshaft running the length of the vehicle to the differential transmission. However, mid engine and rear engine layouts can also be used.
It was a common layout used in automobiles throughout the 20th century. At this time, FWD designs were not practical due to complexity (in FWD, engine power and steering must both be combined in the front axle).
Two-wheel drive
For four-wheeled vehicles, two-wheel drive describes vehicles that transmit torque to at most two road wheels, referred to as either front- or rear-wheel drive. The term 4x2 is also used, to indicate four total road-wheels with two being driven.
For vehicles that have partial four-wheel drive, the term two-wheel drive refers to the mode when four-wheel drive is deactivated and torque is applied to only two wheels.
All-wheel drive
Four-wheel drive
This configuration allows all four road wheels to receive torque from the power plant simultaneously. It is often used in rally racing on mostly paved roads.
Four-wheel drive is common in off-road vehicles because powering all four wheels provides better control on loose and slippery surfaces. Four-wheel drive manufacturers have different systems such as "High Range 4WD" and "Low Range 4WD". These systems may provide added features such as a varying of torque distribution between axles or varying gear ratios.[4]
Common terms for this configuration include four-wheel drive, 4WD, 4x4 (pronounced "four-by-four"), integral, and all-wheel drive (AWD).
Six-wheel drive
Eight-wheel drive
Ten-wheel drive
Twelve-wheel drive
Notes
- "Driving wheel". thefreedictionary.com. Retrieved 13 July 2013.
any wheel of a vehicle that transforms torque into a tractive force.
- Russ, Carey. "Driving Wheels: Introduction and Rear-Wheel Drive". The Auto Channel. Retrieved 13 July 2013.
- Hillier, V.A.W.; Coombes, Peter (2004). Hilliers Fundamentals of Motor Vehicle Technology (Fifth ed.). Nelson Thornes. p. 263. ISBN 9780748780822.
- "Jeep.ca". www.jeep.ca. Retrieved 25 July 2016.
See also
- Drive sprocket, the powered sprocket on a tracked vehicle
