N,N'-Dicyclohexylcarbodiimide

N,N′-Dicyclohexylcarbodiimide (DCC or DCCD)[1] is an organic compound with the chemical formula (C6H11N)2C. It is a waxy white solid with a sweet odor. Its primary use is to couple amino acids during artificial peptide synthesis. The low melting point of this material allows it to be melted for easy handling. It is highly soluble in dichloromethane, tetrahydrofuran, acetonitrile and dimethylformamide, but insoluble in water.

N,N'-Dicyclohexylcarbodiimide
Names
Preferred IUPAC name
N,N'-Dicyclohexylmethanediimine
Other names
Dicyclohexylmethanediimine
N,N'-Dicyclohexylcarbodiimide
DCC, DCCD, DCCI
Identifiers
3D model (JSmol)
610662
ChEBI
ChEMBL
ChemSpider
ECHA InfoCard 100.007.914
EC Number
  • 208-704-1
51651
RTECS number
  • FF2160000
UNII
UN number 2811
Properties
C13H22N2
Molar mass 206.333 g·mol−1
Appearance white crystalline powder
Density 1.325 g/cm3, solid
Melting point 34 °C (93 °F; 307 K)
Boiling point 122 °C (252 °F; 395 K) (at 6 mmHg)
not soluble
Hazards
GHS pictograms
GHS Signal word Danger
GHS hazard statements
 H302, H311, H317, H318
P261, P264, P270, P272, P280, P301+312, P302+352, P305+351+338, P310, P312, P321, P322, P330, P333+313, P361, P363, P405, P501
NFPA 704 (fire diamond)
Flammability code 1: Must be pre-heated before ignition can occur. Flash point over 93 °C (200 °F). E.g. canola oilHealth code 3: Short exposure could cause serious temporary or residual injury. E.g. chlorine gasReactivity (yellow): no hazard codeSpecial hazards (white): no code
1
3
Flash point 113 °C (235 °F; 386 K)
Related compounds
DIC,EDC
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
N verify (what is YN ?)
Infobox references

Structure and spectroscopy

The C-N=C=N-C core of carbodiimides (N=C=N) is linear, being related to the structure of allene. The molecule has idealized C2 symmetry.

The N=C=N moiety gives characteristic IR spectroscopic signature at 2117 cm−1.[2] The 15N NMR spectrum shows a characteristic shift of 275 ppm upfield of nitric acid and the 13C NMR spectrum features a peak at about 139 ppm downfield from TMS.[3]

Preparation

Of the several syntheses of DCC, Pri-Bara et al. use palladium acetate, iodine, and oxygen to couple cyclohexyl amine and cyclohexyl isocyanide.[4] Yields of up to 67% have been achieved using this route:

C6H11NC + C6H11NH2 + O2 → (C6H11N)2C + H2O

Tang et al. condense two isocyanates using the catalyst OP(MeNCH2CH2)3N in yields of 92%:[2]

Homogeneous catalysis

DCC has also been prepared from dicyclohexylurea using a phase transfer catalyst by Jaszay et al. The disubstituted urea, arenesulfonyl chloride, and potassium carbonate react in toluene in the presence of benzyl triethylammonium chloride to give DCC in 50% yield.[5]

Phase transfer catalysis

Reactions

Amide-, peptide-, and ester formation

DCC is a dehydrating agent for the preparation of amides, ketones and nitriles.[1] In these reactions, DCC hydrates to form dicyclohexylurea (DCU), a compound that is nearly insoluble in most organic solvents and insoluble in water. The majority of the DCU is thus readily removed by filtration, although the last traces can be difficult to eliminate from non-polar products. DCC can also be used to invert secondary alcohols. In the Steglich esterification, alcohols, including even some tertiary alcohols, can be esterified using a carboxylic acid in the presence of DCC and a catalytic amount of DMAP.[6]

In protein synthesis (such as Fmoc solid-state synthesizers), the N-terminus is often used as the attachment site on which the amino acid monomers are added. To enhance the electrophilicity of carboxylate group, the negatively charged oxygen must first be "activated" into a better leaving group. DCC is used for this purpose. The negatively charged oxygen will act as a nucleophile, attacking the central carbon in DCC. DCC is temporarily attached to the former carboxylate group forming a highly electrophilic intermediate, making nucleophilic attack by the terminal amino group on the growing peptide more efficient.

Moffatt oxidation

In combination with dimethyl sulfoxide (DMSO), DCC effects the Pfitzner-Moffatt oxidation.[7] This procedure is used for the oxidation of alcohols to aldehydes and ketones. Unlike metal-mediated oxidations, such as the Jones oxidation, the reaction conditions are sufficiently mild to avoid over-oxidation of aldehydes to carboxylic acids. Generally, three equivalents of DCC and 0.5 equivalent of proton source in DMSO are allowed to react overnight at room temperature. The reaction is quenched with acid.

Other reactions
  • Reaction of an acid with hydrogen peroxide in presence of DCC leads to formation of peroxide linkage.
  • Alcohols can also be dehydrated using DCC. This reaction proceeds by first giving the O-acylurea intermediate which is then hydrogenolyzed to produce the corresponding alkene:
RCHOHCH2R' + C6H11N)2C → RCH=CHR' + (C6H11NH)2CO
  • Secondary alcohols can be stereochemically inverted by formation of a formyl ester followed by saponification. The secondary alcohol is mixed directly with DCC, formic acid, and a strong base such as sodium methoxide.

Biological action

DCC is a classical inhibitor of ATP synthase.[8] DCC inhibits ATP synthase by binding to one of the c subunits and causing steric hindrance of the rotation of the FO subunit.[9]

Safety

DCC is a potent allergen and a sensitizer, often causing skin rashes.[1]

gollark: * helper status
gollark: You realise that the entire server has something like 14 people who aren't us?
gollark: I'm actually not entirely sure why I'm *on* the esolangs staff team other than inertia really.
gollark: (presumably people mostly assumed I was blatantly leaking everything anyway)
gollark: Just in general. I don't think ubq has shifted things much.

See also

References
  1. Jeffrey S. Albert, Andrew D. Hamilton, Amy C. Hart, Xiaoming Feng, Lili Lin, Zhen Wang (2017). "1,3‐Dicyclohexylcarbodiimide". EEROS: 1–9. doi:10.1002/047084289X.rd146.pub3. ISBN 9780470842898.CS1 maint: uses authors parameter (link)
  2. Tang, J.; Mohan, T.; Verkade, J. G. (1994). "Selective and Efficient Syntheses of Perhydro-1,3,5-triazine-2,4,6-triones and Carbodiimides from Isocyanates Using ZP(MeNCH2CH2)3N Catalysts". Journal of Organic Chemistry. 59 (17): 4931–4938. doi:10.1021/jo00096a041.
  3. Yavari, I.; Roberts, J. D. (1978). "Nitrogen-15 Nuclear Magnetic Resonance Spectroscopy. Carbodiimides". Journal of Organic Chemistry. 43 (25): 4689–4690. doi:10.1021/jo00419a001.
  4. Pri-Bar, I.; Schwartz, J. (1997). "N,N-Dialkylcarbodiimide Synthesis by Palladium-Catalysed Coupling of Amines with Isonitriles". Chemical Communications. 1997 (4): 347–348. doi:10.1039/a606012i.
  5. Jászay, Z. M.; Petneházy, I.; Töke, L.; Szajáni, B. (1987). "Preparation of Carbodiimides Using Phase-Transfer Catalysis". Synthesis. 1987 (5): 520–523. doi:10.1055/s-1987-27992.
  6. Neises, B.; Steglich, W. (1985). "Esterification of Carboxylic Acids with Dicyclohexylcarbodiimide/4-Dimethylaminopyridine: Tert-Butyl Ethyl Fumarate". Organic Syntheses. 63: 183. doi:10.15227/orgsyn.063.0183.
  7. John G. Moffatt (1967). "Cholane-24-al". Org. Synth. 47: 25. doi:10.15227/orgsyn.047.0025.
  8. Hong S, Pedersen PL. (2008). "ATP synthase and the actions of inhibitors utilized to study its roles in human health, disease, and other scientific areas". Microbiol Mol Biol Rev. 72 (4): 590–641. doi:10.1128/MMBR.00016-08. PMC 2593570. PMID 19052322.CS1 maint: uses authors parameter (link)
  9. Toei M, Noji H. (2013). "Single-molecule analysis of F0F1-ATP synthase inhibited by N,N-dicyclohexylcarbodiimide". J Biol Chem. 288 (36): 25717–26. doi:10.1074/jbc.M113.482455. PMC 3764779. PMID 23893417.CS1 maint: uses authors parameter (link)
  • An excellent illustration of this mechanism can be found here: .
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.