County Fire

The County Fire (formerly known as the Guinda Fire) was a wildfire east of Lake Berryessa in Yolo County and Napa County, California in the United States. The fire, first reported on June 30, 2018, in Rumsey Canyon in the community of Guinda, and was contained on July 17, 2018 after burning 90,288 acres (141 sq mi; 365 km2). The fire caused mandatory evacuations along Highway 128, County Road 23, and areas around Lake Berryessa, including Monticello Dam. The fire destroyed 20 structures, damaged three, and caused one injury. The fire was started by an improperly installed electric fence for livestock.

County Fire
Fire crews during the County Fire on July 1, 2018
LocationYolo County and Napa County, California, United States
Coordinates38.80583°N 122.18183°W / 38.80583; -122.18183
Statistics[1]
Cost>$46.9 million (2018 USD)[2]
Date(s)June 30, 2018 (2018-06-30) – July 17, 2018 (2018-07-17)
Burned area90,288 acres (365 km2)
CauseImproperly installed electric livestock fence unit
Buildings destroyed20
DeathsNone reported
Non-fatal injuries1 firefighter
Map
Location of fire in California

Timeline

June

The County Fire was first reported at 2:12 pm on June 30, 2018 in vegetation alongside County Road 63 and Highway 16 in Rumsey Canyon in Guinda in Yolo County and a small part of Napa County in California. The fire was fueled by dry vegetation and was driven by red flag conditions, including high temperatures, gusty winds and low humidity. By the end of the day, the fire had burned 8,000 acres (32 km2) and caused mandatory evacuations in the area.[3]

July

By the morning of July 1, the County Fire was burning out of control and had grown to 16,500 acres (67 km2), crossing the Yolo County and Napa County line, burning west of Woodland in a rural area near Lake Berryessa.[4][5] Evacuation advisories were put in place for areas south of County Road 81 and west of County Road 85, as well as areas of Solano County, and additional mandatory evacuations were put in place.[4][6][7] By the afternoon, the County Fire was 22,000 acres (89 km2), at 0% containment.[1] The evacuation center at the grange in Guinda was closed and a new evacuation center was open in Esparto. Additional evacuations were put in place for the areas around the Monticello Dam.[8]

By the evening of July 1, the County Fire was at 32,500 acres (132 km2), 2% containment, and threatened 116 structures.[1] By the morning of July 2, the fire had grown to 44,500 acres (180 km2). CAL FIRE stated that extreme fire behavior was still being observed. The fire continued expanding throughout the day. By the morning of July 3, the fire had burned an additional 10,000 acres (40 km2), reaching 70,000 acres (283 km2). Containment stayed at five percent, though firefighters continued setting up containment lines. On the Fourth of July, the fire had grown to threaten 1,500 structures and was 27 percent contained. Firefighters focused on building containment lines, with inaccessible terrain causing accessibility challenges for fire crews.[9] By the evening, mandatory evacuations along Highway 16 and County Road 53 to Highway 128 were lifted.[10]

During the evening of July 5, the County Fire was at 88,000 acres (356 km2) and 33 percent containment. Damage inspections started while the fire activity was minimal. All evacuation advisories were lifted on July 5, and mandatory evacuations moved to areas west of Highway 16.[11] Initial findings report nine buildings destroyed, however, by July 7, 10 buildings were reported destroyed and two damaged.[12] All evacuated areas were reopened by July 10.[1]

As of July 12, the fire has burned a total of 90,288 acres (365 km2) and was 92 percent contained.[1] In total, 20 buildings have been destroyed and three have been damaged.[13] The fire was started by an improperly installed electric fence for livestock. The responsible party was cited under code 4421 for "burning of lands of another."[14] The County Fire was declared contained on July 17, 2018.[1]

Impact

The County Fire burned in rural areas of Northern California, impacting primarily rural natural areas and areas with low populations.

Evacuations

Initial mandatory evacuations took place along county roads and areas west of Highway 16 in the Murphy Ranch area of Guinda.[3] By July 1, the fire had spread into Napa County, specifically rural areas of Lake Berryessa, causing more mandatory evacuations, including the entire Lake Berryessa area north of Highway 128, including all homes around Monticello Dam.[6][7] Additional areas that were evacuated due to the County Fire include Brooks, including members of the Yocha Dehe Wintun Nation.[15]

Closures
Areas surrounding Lake Berryessa were evacuated and closed during the County Fire, impacting residents and recreational areas.

Road closures began on July 1, primarily focused on county roads extending from Highway 128, including those reaching into Markley Resort. Pope Creek Bridge was also closed.[16]

Economic

The fire impacted recreation areas on Lake Berryessa, including the Markley Cove and Pleasant Cove resorts. The properties were put under evacuation warnings, and access to the resorts was closed along Highway 128.[16][17]

Investigation

The cause of the fire remained unknown until July 11, when CAL FIRE reported that a livestock electric fence, which was improperly installed, was what had started the fire in Guinda. The individual(s) responsible were cited under Public Resource Code 4421 for "burning of lands of another."[14]

gollark: > asm2bf has its own assembly languageIt's an esolang. Sanity and stuff don't count.
gollark: I think they are working on some codegen changes somewhere.
gollark: > Rust has llvm, which is kinda worse than an own asm because it's not even original and not even real asmIt's *better*, since it's actually used in other things and they did not make up their own for some bizarre reason.
gollark: Hmm, yes, apparently Linux has a monotonic clock thing available.
gollark: Possibly an OS thing.

References
  1. "County Fire". CalFire. State of California. 8 July 2018. Retrieved 9 July 2018.
  2. "2018 National Large Incident Year-to-Date Report" (PDF). CAL FIRE. August 28, 2018. Retrieved August 30, 2018.
  3. "County Fire Incident Update 6/30/2018 PM" (PDF). CAL FIRE. Retrieved 1 July 2018.
  4. "County Fire Incident Update 7/1/18 AM" (PDF). CAL FIRE. Retrieved 1 July 2018.
  5. Larson, Elizabeth. "County fire grows, crosses into Napa County; more evacuation orders, advisories issued". Lake County News. Lion Publishers. Retrieved 1 July 2018.
  6. "Cal Fire News Release 7/1 AM" (PDF). CAL FIRE. California Department of Forestry and Fire Protection. Retrieved 1 July 2018.
  7. "CAL FIRE NEWS RELEASE" (PDF). CAL FIRE. California Department of Forestry and Fire Protection. Retrieved 1 July 2018.
  8. "The County Fire Forces Additional Mandatory Evacuations and Road Closures" (PDF). CAL FIRE. California Department of Forestry and Fire Protection. Retrieved 1 July 2018.
  9. "County Fire Incident Update" (PDF). CALFIRE. State of California. Retrieved 6 July 2018.
  10. "CAL FIRE NEWS RELEASE" (PDF). CAL FIRE. California Department of Forestry and Fire Protection. Retrieved 6 July 2018.
  11. "County Fire Incident Update" (PDF). CALFIRE. Retrieved 6 July 2018.
  12. "County Fire Incident Update" (PDF). CAL FIRE. Retrieved 7 July 2018.
  13. "County Fire Incident Update" (PDF). CALFIRE. Retrieved 10 July 2018.
  14. "Investigators Determine Cause of County Fire" (PDF). CAL FIRE. State of California. Retrieved 11 July 2018.
  15. "Cal Fire News Release" (PDF). CAL FIRE. State of California. Retrieved 11 July 2018.
  16. "County Fire Incident Update" (PDF). CAL FIRE. State of California. Retrieved 11 July 2018.
  17. "Cal Fire News Release" (PDF). CAL FIRE. State of California. Retrieved 11 July 2018.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.