AAC-1937
The AAC-1937, which means Autoametralladora-cañón Chevrolet modelo 1937, also known as Chevrolet 1937, was an armored car developed and built in Catalonia. After the dismantling of the War Industry Commission of Catalonia, the Subsecretary of Weapons and Ammunitions of Spain contracted Soviet engineers to build a new armored vehicle. They took the BA-6 as a basis for the new vehicle, and built a very similar vehicle, the AAC-1937 in the Hispano-Suiza factory in Barcelona, using a chassis from General Motors Peninsular.[1]
| AAC-1937 (Autoametralladora-cañón Chevrolet modelo 1937) | |
|---|---|
 A ACC-1937 drawing, with a 37mm Puteaux cannon | |
| Type | Armored car |
| Place of origin | Spanish Republic |
| Service history | |
| Used by | Second Spanish Republic Francoist Spain French Third Republic Nazi Germany |
| Wars | Spanish Civil War World War II |
| Production history | |
| Designer | War Industry Commission in Catalonia |
| Designed | 1937 |
| Manufacturer | Hispano-Suiza |
| Produced | 1937–1938 |
| No. built | 60-90 |
| Specifications | |
| Mass | 4,354 t[1] |
| Length | 4.4 m |
| Width | 2.25 m |
| Height | 2.4 m |
| Crew | 4 (gunner, driver, machine gunner and commandant) |
| Armor | 8 mm |
Main armament | 1x37mm Puteaux SA 18 cannon, a T-26B or BA-6 turret, a HMG |
Secondary armament | 1×7.92 hull machine gun |
| Engine | Chevrolet OHV 216.5-ci (gasoline motor of 6 cylinder) 78 hp at 3,200 revolutions per minute |
| Suspension | wheeled 6x4 |
Operational range | 250 km in road |
| Maximum speed | 62 km/h |
With a total run of between 60 and 90 units, the AAC-1937 fought in the Spanish Civil War in the east: in the Aragon offensive and in the Catalonia offensive. With different kinds of weaponry and high quality construction, it was the best armored vehicle produced during the conflict in Catalonia.
After the fall of Catalonia (also known as La retirada), the AAC-1937 went to the armies of France and Spain. With the start of WW2 these vehicles saw use in the Battle of France and the Germans captured some of them. Later they used them in the Eastern Front, where they were destroyed by the Soviets during the first months of the conflict.[2]
Antecedents
After the First World War, Spain acquired 12 Renault FT-17 and 6 Schneider CA1 from France. In 1921, those tanks were sent to Morocco, where they participated in their first battle in 17 March 1922 with bad results, as they advanced ahead of the infantry until they were surrounded and isolated, some with their machine guns blocked, and suffered heavy losses. After that bad start, they gave support in the Rif War, with great success during the Alhucemas landing, a decisive victory that led to their return to Spain.[3]
The Moroccan campaign demonstrated the importance of these new weapons and encouraged the acquisition of more tanks, like the Fiat 3000 from the Kingdom of Italy in 1924, and the production of a national tank in 1925: the Trubia A4. The Sanjuanada of 1926, meant that tanks, usually associated to the artillery officers that participated in the coup d'état, lost the favour of the administration and the projects for national production or armored vehicles were cancelled.[4]
The tanks that were still operative before the start of the Spanish Civil War were assigned to two units: the Regimiento Ligero de Carros de Combate (LCC) número 1, stationed near Madrid, and the Regimiento LCC número 2, near Saragossa.[4]
Beginnings
In Catalonia, after the July 1936 military uprising in Barcelona, the workers decided to help the war effort producing weapons, including tanks.
Starting from zero, and after the initial chaos, the War Industry Commission in Catalonia was in charge of managing the production of the new armored vehicle. During that period they built several experimental vehicles with a wide variety of uses and performances.
After the May Days, the Republican Government took charge of the weapons and ammunition industries of all the Republican territory, including the Catalan one.[5] In the meantime, the Italian and German navy controlled most of the naval routes to the Iberian peninsula, and because of that, the Soviet Union wasn't able to send resources via sea. These reasons pushed the Second Spanish Republic into building a national tank or armored vehicle.
The Spanish subsecretary of weapons, with the help of soviet engineers, started development of a new heavy armored vehicle in April 1937, taking the BA-6 as a reference. The most famous vehicle was the AAC-1937, which was based on the chassis of the Chevrolet SD 1937 truck from General Motors Peninsular, produced in Barcelona.
The problem was that the Chevy SD 1937 only had 2 axles, and the extra weight added by the armour made it too unstable. To fix it, they added axles from soviet GAZ trucks that were copies of American designs. The outcome was that the AAC-1937 was very similar to the BA-6, but was more agile thanks to a more powerful engine.[1]
Design
The armour was made in the blast furnace of Sagunt, in Valencia (which also produced the UNL-35, another armored car similar to the BA-20). The vehicle was protected by welded steel sheets, similar to Soviet vehicles of the time. The biggest differences to the BA-6 were the doors to access the engine, the wheels and the mudguard.
The AAC-1937 usually had a crew of four operators: driver, commander, gunner and driver helper, who used the hull machine gun. There were several variations in weaponry and turret configuration:
- One machine gun equipped with his own turret: Maxim machine gun, DT machine gun, MG 13
- Recovered turret form T-26, BT-5 and BA-6 tanks
- One cannon Puteaux SA 18 of 37 mm, used from the Renault FT-17 tanks, with a coaxial machine gun[6]
The weapons were diverse mainly because of limited availability. The vehicles started being delivered from the factory in April 1937. The production rate was four tanks a month until March 1938, when the nationalist forces split the Republican territory in two, isolating Catalonia from their vital steel supply for the production of tanks. In total there were between 60 and 90 AAC-1937 built.[1]
In combat
The AAC-1937 was used in the Spanish Civil War and in the Second World War. They were also used in the Spanish Army in the Francoist Spain period until the decade of 1950 in cavalry units.
Spanish Civil War
The first battle of the AAC-1937 was in the May Days, alongside UNL-35 armored cars. It was later used by the 1st Armoured Division (in Catalonia) and the 2nd Armoured Division (in the South-Centre). During the war, at least 30 of these vehicles were captured by the nationalist forces, changing its weapons for MG 13 machine guns.
After the Battle of the Ebro, where the Franco forces destroyed 17 AAC-1937 and captured 18,[7] all the remaining AAC-1937 that were still in Catalonia were pulled back to the French border, where they were given to the French border forces.[1]
Second World War
The French used the AAC-1937, and during the Battle of France they were used with low casualties, though 20 were captured by troops of Nazi Germany. Those vehicles were modified with the installation of new German weapons, changing the Puteaux SA 18 37 mm cannon for a MG 34 or MG 42, changing its role to use them as troops transports, or as a Self-propelled anti-aircraft weapon using 2 MG 34 or MG 42 with an AA mount.[8]
Once in German hands, the AAC-1937 were used in Operation Barbarossa. The photographic references show that they were even used in the Battle of Moscow, and several were destroyed by the Red Army.
References
- Willkerrs, ed. (24 May 2016). "AAC-1937". Tanks Encyclopedia. Retrieved 11 October 2016.
- Manrique & Molina 2006, p. 303.
- Zaloga 2010, p. 10.
- Zaloga 2010, p. 11.
- Martínez, Lluís (30 December 2013). "La guerra recluta les indústries" (in Catalan). El Punt Avui. Retrieved 15 November 2014.
- Zaloga 2010, p. 38.
- Zaloga 2010, p. 39.
- http://beutepanzer.ru/Beutepanzer/hispan/hispan.htm
See also
- Trubia A4
- Trubia Naval
- Kübelwagen
- Lancia IZM