1990 European Athletics Indoor Championships – Women's 200 metres
The women's 200 metres event at the 1990 European Athletics Indoor Championships was held in Kelvin Hall on 3 and 4 March.[1]
Medalists
| Gold | Silver | Bronze |
Ulrike Sarvari |
Natalya Kovtun |
Galina Malchugina |
Results
Heats
The winner of each heat (Q) and the next 5 fastest (q) qualified for the semifinals.
| Rank | Heat | Name | Nationality | Time | Notes |
|---|---|---|---|---|---|
| 1 | 1 | Silke Knoll | | 23.24 | Q |
| 2 | 3 | Ulrike Sarvari | | 23.27 | Q |
| 3 | 3 | Natalya Kovtun | | 23.36 | q |
| 4 | 4 | Sandra Myers |  | 23.37 | Q |
| 5 | 2 | Galina Malchugina | | 23.38 | Q |
| 6 | 5 | Regula Anliker |  | 23.40 | Q |
| 7 | 1 | Marie-Christine Cazier |  | 23.72 | q |
| 8 | 4 | Sisko Hanhijoki |  | 23.78 | q |
| 9 | 1 | Monika Špičková |  | 23.86 | q |
| 10 | 2 | Cristina Castro | | 23.93 | q |
| 11 | 5 | Sabine Tröger |  | 23.94 | |
| 12 | 5 | Donatella Dal Bianco |  | 23.99 | |
| 13 | 2 | Jennifer Stoute |  | 24.03 | |
| 14 | 4 | Marisa Masullo | | 24.12 | |
| 15 | 1 | Helen Burkart | | 24.40 | |
| 16 | 3 | Blanca Lacambra | | 24.60 | |
| 2 | Lucrécia Jardim |  | DNF |
Semifinals
First 2 from each semifinal (Q) and the next 1 fastest (q) qualified for the final.
| Rank | Heat | Name | Nationality | Time | Notes |
|---|---|---|---|---|---|
| 1 | 1 | Natalya Kovtun | | 23.05 | Q |
| 2 | 2 | Ulrike Sarvari | | 23.08 | Q |
| 3 | 2 | Sandra Myers | | 23.15 | Q |
| 4 | 2 | Galina Malchugina | | 23.16 | q |
| 5 | 1 | Silke Knoll | | 23.42 | Q |
| 6 | 1 | Regula Anliker | | 23.57 | |
| 7 | 2 | Monika Špičková | | 23.88 | |
| 8 | 1 | Marie-Christine Cazier | | 24.01 | |
| 9 | 2 | Sisko Hanhijoki | | 24.30 | |
| 10 | 1 | Cristina Castro | | 24.72 |
Final
| Rank | Name | Nationality | Time | Notes |
|---|---|---|---|---|
 | Ulrike Sarvari | | 22.96 | |
 | Natalya Kovtun | | 23.01 | |
 | Galina Malchugina | | 23.04 | |
| 4 | Sandra Myers | | 23.08 | |
| 5 | Silke Knoll | | 23.57 |
gollark: ```lualocal r = peripheral.wrap("back")while true do term.clear() term.setCursorPos(1, 1) local txt if r.getActive() then txt = "Aktiv" else txt = "Inaktiv" end print("Der Reaktor ist", txt) print(r.getEnergyStored(), "RF gespeichert") sleep(1)end```
gollark: Also, please use local variables and do indentation.
gollark: What you need to do is check `r.getActive` and the other stuff *in the loop*, and ensure that both branches correctly yield and print everything.
gollark: - it doesn't do anything *else*, so it just loops infinitely and will eventually crash with "too long without yielding".
gollark: Well, the problem is this:- you only set `state` once at the beginning of the program- it's probably `true` then- it goes into the `if state == true` branch, which only sets the `txt` variable
References
- Results (p. 531)
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.