XenServer is the virtualization platform Citrix has built around the Xen Hypervisor.
Questions tagged [xenserver]
631 questions
0
votes
0 answers
XenServer multiple ISO storage repo
I'm using XenServer7.2. My ISO images are organized in a hierarchy, which is tree structure in a remote file system (SMB/CIFS). For instance, Ubuntu 16.04 is in Linux/Ubuntu/Xenial. How can I add a storage repo (SR) to the XenServer (7.2) that…
![](../../users/profiles/149203.webp)
lqu
- 241
- 1
- 3
0
votes
1 answer
XenServer 6.5 host is not passing through network traffic (Ubuntu)
I have recently install XenServer 6.5 and have 5 static IP addresses assigned to the server, the host however is not passing through the VM traffic across the assigned IP, it is defaulting the additional IP directly to the host, for…
![](../../users/profiles/373697.webp)
ah1
- 3
- 2
0
votes
1 answer
XenServer 7 - Pass all public traffic to firewall solution
I have a server running with XenServer 7 installed.
Currently the XenServer only has a single VM (FW01) which is my Firewall solution and router, what i would like to do is connect the XenServer to the WAN over ETH0 and forward all traffic received…
![](../../users/profiles/333797.webp)
Cristian Matthias Ambæk
- 257
- 1
- 13
0
votes
1 answer
Citrix XenServer Upgrade from 6.2 to 7.1 hardware driver crash
I upgraded a XenServer version 6.2 host to 7.1
One of the VMs (CentOS 6.9, PV type - paravirtualized) on the host runs Asterisk phone software which uses a module called "DAHDI" which is a set of hardware drivers for telephony purposes.
Before…
![](../../users/profiles/170850.webp)
nepdev
- 381
- 1
- 6
- 19
0
votes
1 answer
OpenVPN on pfSense, can ping but nothing else
I have an OpenVPN setup on a pfSense to give me access to the private network. Everything works fine, I can connect and ping the VMs on the private network no problem; but when I try to request a web page (or anything else really) the packet comes…
![](../../users/profiles/423303.webp)
GmodCake
- 111
- 5
0
votes
1 answer
Citrix XenCenter templates for RHEL 6.x OS
I have Citrix XenServer 7.1 installed on my server. In Citrix XenCenter, I have connected my server and created few VMs.
On choosing respective VM templates, OS with 6.x architecture (i.e. RHEL 6.x, CentOS 6.x, Oracle Linux 6.x) is getting installed…
![](../../users/profiles/421777.webp)
Amit24x7
- 111
- 6
0
votes
1 answer
Failed to attach storage on server
Server Datasheet:
Dell R710
RAM : 32 GB
Local storage 0 : Sata SSD 1 TB
Local storage 1 : SAS Dell-perc Raid 1 (1 TB total)
XEN Server 7.1
What is happened?
After shutdown the Xen hypervisor is displaying a message:
Failed to attach storage on…
![](../../users/profiles/356463.webp)
Fabricio
- 203
- 1
- 4
- 12
0
votes
1 answer
Windows Server 2008r2 clonezilla image cannot boot with XenServer
I'm trying to do a P2V using clonezilla but the cloned image would not boot.
I have an IBM x3400 m3 machine running Windows Server 2008r2 as the OS. I'm turning the physical machine into a XenServer, so I tried to do a cold clone of the Windows…
0
votes
1 answer
Xen not detecting xenbr0
I am trying to create an HVM but when I start it up I see that it fails with this error message on the command line:
[root@xs5 xen]# xl create devoracle.cfg
Parsing config from devoracle.cfg
libxl: error:…
![](../../users/profiles/238366.webp)
ryekayo
- 452
- 5
- 14
0
votes
1 answer
Windows 2012 R2 - L1 cache N/A
I have a number of Windows 2012 R2 servers running as VMs on a XenServer 7.0 host. When I open Task Manager in any VM, it reports the L1 cache to be "N/A". The server is a decent spec, only a year old, a Dell R730. Should I be concerned or is this…
![](../../users/profiles/49673.webp)
Reado
- 692
- 2
- 9
- 24
0
votes
2 answers
XenServer 7.1.0 PXE installation
As my IBM Blade Center H has known difficulties with booting HS22 Blades from CDROM the best option for me is installation via network. So I'm trying to set up a PXE boot of the XenServer 7.1.0 installation.
I'm following Citrix Installation Guide…
![](../../users/profiles/279535.webp)
Gerald Zehetner
- 146
- 7
0
votes
1 answer
What are the Resource Pool Requirements for XenServer 5.5?
I have installed Free XenServer on 2x HP DL360's, one with Quad-core CPU and another one with 2 Dual-core CPUs.
When I tried to join the Resources Pool I got an error
The hosts in this pool are not homogeneous. cpus differ
Citrix Resource Pool…
![](../../users/profiles/4694.webp)
Jindrich
- 4,958
- 8
- 29
- 42
0
votes
1 answer
How to direct traffic to VM from host in xenserver?
Hi im farely new at this, please direct me to right direction, i've setup a xenserver and installed a centos 7 VM on the host. Host and VM have separate internal ip addresses. I can get to the host by typing the internal ip from a computer on the…
![](../../users/profiles/123653.webp)
jarus
- 145
- 1
- 8
0
votes
1 answer
Dell M620 Xenserver network issue
I've got a really strange problem running Xenserver 7.0 (tried 7.1 as well) on a Dell M620 with BCM57810 network card.
The whole setup is fine and running flawlessly with no traffic. I've got a Windows Server 2016 running and can access it with RDC…
![](../../users/profiles/158099.webp)
Meiko Watu
- 334
- 3
- 14
0
votes
1 answer
Upgrade XenServer 6.5 to 7.1 - Supplemental Packages
I'm planning on upgrading our PowerEdge M620 servers from 6.5 to 7.1. I read that the opemanage 8.1 also need to be reinstalled. I installed the opemanage server node 8.1 for the 6.5 install in order to get the remote server power-on feature…
![](../../users/profiles/276604.webp)
jrd1989
- 628
- 10
- 35