Questions tagged [dell-openmanage]

OpenManage is Dell's systems management and administration platform.

OpenManage is Dell's systems management and administration platform.

107 questions
9
votes
1 answer

Using non-certified hard drives in Dell MD3220 storage array

Is it possible to use non-certified hard drives in a Dell MD3220 storage array? I ended up getting 3 new drives that were the EXACT same model number as the existing ones. Then I bought the drive caddies to go with them. The drives I'm working…
7
votes
2 answers

Dell PowerEdge - Add new disk to an existing RAID 5 array

I have a Dell PowerEdge with a RAID 5 array of 3 disks, and I want to add a fourth disk to it to expand the capacity of the volume. I don't want to reinitialize the whole RAID 5, because I want to keep all the data on it and just expand it. Can I do…
Jonathan Rioux
  • 1,878
  • 6
  • 33
  • 57
7
votes
3 answers

Dell OpenManage Server Administrator - doesn't display storage devices

I'm running CentOS 5 on a Dell PowerEdge R200. I have installed OpenManage Server Administrator specifically to monitor the HDDs (x2 250GB RAID1) in the machine and alert of any issues or failures. I have also installed the SAS 5/iR / 6/iR Device…
user8548
  • 101
  • 1
  • 1
  • 6
6
votes
5 answers

Anyone know how to fix issues with omsa on red hat 5.1 that reports "No Controllers found"?

I've got a Red Hat 5.1 server 64-bit Dell 2950 with a PERC 5/i controller that until recently was working fine. On it I have an NRPE command check_openmange that started returning errors: /usr/local/nagios/libexec/check_openmanage Storage Error! No…
Gray Race
  • 833
  • 2
  • 10
  • 20
5
votes
0 answers

Dell OpenManage Web Interface Inaccessible

We've installed all the Dell server admin tools on our Ubuntu 12.04 Server box using the following command: sudo apt-get install srvadmin-all All the omreport commands etc work as expected but we need to be able to access the OpenManage web…
BT643
  • 551
  • 3
  • 9
  • 21
5
votes
3 answers

Dell Perc 5/i battery replacement - how long until it registers as good?

So I replaced the battery for my Dell Perc 5/i controller since the machine had an error code that it needed to be replaced. I ordered the battery directly from dell based on the service code and installed it without issue. In open manage it still…
Scott Szretter
  • 1,860
  • 11
  • 42
  • 66
5
votes
3 answers

Make Dell's OpenManage 6.2 information available through SNMP

I have successfully installed OpenManage on a CentOS 5.4 server and I'm able to use OpenManage through the web interface running on port 1311, but I would like to be able to expose this information through the SNMP server. I don't know SNMP…
tronda
  • 1,261
  • 10
  • 13
4
votes
1 answer

'Foreign' state for brand new disk in Dell R730

Trying to install additional drives into my R730 Dell Poweredge (none have failed, just need more space) Inserted the disks and they all show as status 'Foreign' and the only option available is 'Blink' or 'Unblink' Some sources refer to 'clear…
4
votes
2 answers

Failed Dell PowerEdge T410: Move Hardware RAID PERC H700: 3 x 300GB SAS (1 faulty) to 2nd T410 for Disk Cloning & Boot

Failed Dell PowerEdge T410: Move Hardware RAID PERC H700: 3 x 300GB SAS (1 faulty) to 2nd T410 for Disk Cloning & Boot FYI - PRE QUESTION CONTEXT: We barely got the original T410 up once where it was flagging CMOS battery errors, which we changed…
4
votes
4 answers

Acknowledging a warning in DELL OpenManage

We have a DELL R510 server where we replaced all the hard drives with new but non-certified 3TB disks. Now OpenManage throws a warning for every hard disk as "non-critical", since it recognizes the unsupported drives. Is there any way to…
HannesS
  • 322
  • 5
  • 17
4
votes
1 answer

How do upgrade OpenManage from 6.5 to 7 in CentOS 6?

How do I upgrade OpenManage? When I download the rpm there are no scripts include in the tar file, and the Dell repo doesn't seem to have OpenManage 7?
Kyle Brandt
  • 82,107
  • 71
  • 302
  • 444
4
votes
2 answers

Can the features of Dell OpenManage be replaced by Microsoft System Center?

I'm new to both OpenManage and System Center, but it sounds as if they're geared towards similar problems/goals. Are the features comparable enough that OpenManage can be forgone completely in favor of System Center products? Specifically I'm…
bwerks
  • 752
  • 3
  • 10
  • 22
4
votes
3 answers

Dell fumbles OpenManage installation process, forgets to write documentation?

I'm setting up a Dell PowerEdge 2950 for a small business, and I've just spent a while with Dell OpenManage Server Administrator 6.2, trying to clear the installation process of errors before I execute it. Right now I'm getting the following warning…
bwerks
  • 752
  • 3
  • 10
  • 22
3
votes
1 answer

Dell PowerEdge R820 with a PERC H710 Raid Controller

I just did a planned disks replacement on our Dell PowerEdge R820 with a PERC H710 Raid Controller. Which I have done quite a few times before without any issues, but tonight I am running into a very strange scenario. When the replacement completed…
3
votes
1 answer

vCenter Email Alerts

We have 4 ESX hosts in a cluster managed by vcenter (5.5). We have the Dell Open Manage integration suite which adds 100's of additional alarm/alerts to vcenter. We want to setup email alerts for practically all of these - as they essentially will…
PnP
  • 1,684
  • 8
  • 37
  • 65
1
2 3 4 5 6 7 8