Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [pfsense]

pfsense is a customized FreeBSD+pf distribution designed for use as a firewall. It wraps many of the features of the pf firewall code in an easy-to-use web interface.

pfSense is an open-source firewall product built on top of FreeBSD and the OpenBSD pf firewall.
It provides a graphical (web-based) interface for configuring and managing firewall rules, as well as viewing traffic and firewall decisions (accept/reject).

pfsense is available as a pre-built applicance (such as OPNSense or StrongBochs) or as installable software directly from the pfSense project's site.

pfsense is similar in concept to m0n0wall, however as of this writing m0n0wall uses the ipfilter packet filter.

811 questions
0
votes
1 answer

Pfsense networking, routing and rules

I'm new to pfsense I just installed it today. I'm trying to configure a DHCP server. I have three interfaces the WAN, LAN and Guest Network. I configure the LAN to 192.168.0.1/20 and the WAN is DHCP address and the guest network is set 172.16.0.1/22…
James Palin
  • 1
0
votes
0 answers

Mac OS X server - cannot add devices to MDM server

Mac OS X 10.14.4 - Server 5.8 I am trying to add devices to the server to manage them, the server is set up, the certificates as well, the Trust profile and the enrollment profiles are set, but when i try to Enroll a device - either macOS or iOS, I…
Davide Biasco
  • 1
  • 2
0
votes
1 answer

pfsense: Connection between two lans drops after 30s

Problem Solved It was an asymetric routing problem. It occured because i had two NICs on the server, one wired and one wireless. When connecting to the server via wlan-ap-wire, the packets took another way back. The solution was pretty easy, just…
joxxe
  • 3
  • 2
0
votes
2 answers

Routing between different LAN subnets with different LAN GW

I have a little stupid question, but i'm really stucked. We have two pfsense in different location. In first location we have LAN net 10.200.1.0/24 with gateway 10.200.1.1. In second location we have LAN net 10.200.40.0/24 with gateway…
Theo Vi
  • 11
  • 4
0
votes
1 answer

pfSense - IPSec through IPSec tunnel possible

I have three sites connected with two IPSec tunnels: Site A - 192.168.10.0/24 | IPSec tunnel | Site B - 192.168.0.0/24 | IPSec tunnel | Site C - 10.0.0.0/8 This works great, and I can reach Site A and Site C…
pgb
  • 445
  • 1
  • 6
  • 18
0
votes
1 answer

Changing Router configuration to give same IP subnet as on its WAN [pfsense]

My currrent configuration is Modem-->Pfsense[WAN(10.1.1.4) + LAN(192.168.1.1)] -->[WAN]Router[LANs]--->PC1 Now the problem was that the router gave its own IP to computer like 192.168.2.10 with gateway 192.168.2.1 The internet was working but…
John
0
votes
1 answer

pfsense xml restore on dissimilar hardware

pfsense has it's built in backup and restore function. it stores backup in xml files. they are located in /cf/config directory. backup can be done in many was from web interface or from directories. I want to ask if anyone has restored xml backup on…
tuli
  • 1
0
votes
1 answer

Pfsense routing between OPT subnet and LAN subnet

Hereafter is my today address plan and related cabling which works partially. on top of this picture I have in mind to offer a OpenVPN connection NATed to the OPT subnet (but this is for later because the first step does not…
Regpa
  • 21
  • 1
  • 2
0
votes
1 answer

Using traefik and docker to securely expose some containers publicly

I have a 16 core, 128GB server that handles all kinds of stuff at home. On a VM I run a Windows Domain controller and all my Windows PC's are joined to that domain. On the server, I also run multiple services in Docker containers. Initially, I…
inquam
  • 169
  • 13
0
votes
2 answers

How to make computer use internet only with proxy SQUID PFSENSE

My computer still access the internet although squid is inatalled. IF i manually put proxy setting then internet also works. How can stop internet if proxy is not entered
John
0
votes
1 answer

IE block file download but Firefox allows even if setting does not allow in Squid/pfsense

I have enabled the setting in squid (in pfsesnse) where any file which is greater than 50MB should not be downloaded. I tried downloading in IE and it comes with error that security setting does not allow you to download that file. But when i tried…
John
0
votes
1 answer

How to divide internet after installing PFsense in VM

I have installed PFsense inside VM and used two ethernet cards as descrivbed in their manual. My WAN IP = 10.0.11.113 My LAN IP = 192.1768.2.1 Now after installing I am getting only DOS type interface. Now how can I divide internet to other VMs…
John
0
votes
0 answers

Make VM accessible over RDP with pfsense

I would like to make my VM which is in the test environment accessible from a specific Network (called FW_PRODUCTIVE) over RDP. For doing that, I did make following steps: Create 1:1 NAT Rule Interface = WAN External IP = my pulic IP…
Baku Bakar
  • 97
  • 2
0
votes
0 answers

Allow virtual instances on openstack behind an pfsense firewall

I have OpenStack Queens deployed using Packstack on CentOS 7. My network has a pfSense firewall. I launched an instance and associated a floating IP to i. But when i try to ping it, it shows "destination unavailable". I tried adding an entry to…
mr_pool_404
  • 101
  • 3
0
votes
1 answer

PFSense enable private access via shell

I was setting up a new PFSense and I managed to tick "Block private networks and loopback addresses" on the LAN interface. Is there a shell command through which I can disable that? I know I'm supposed to be editing /cf/config.xml I think but I…
user757392
  • 173
  • 1
  • 3
  • 12
1 2 3
…
54 55