Wheelwright

A wheelwright is a craftsman who builds or repairs wooden wheels. The word is the combination of "wheel" and the word "wright", (which comes from the Old English word "wryhta", meaning a worker or shaper of wood) as in shipwright and arkwright[1] This occupational name became the English surname Wright. It also appears in surnames like Cartwright and Wainwright. It corresponds with skilful metal workers being called Smith.

For other uses, see Wheelwright (disambiguation).
Wheelwright reenactor New Salem, Illinois
Wheelwrights Workshop at the Amberley Working Museum, West Sussex, England
Worldwide Wheelwright Phill Gregson fitting Iron 'strakes' to a traditional wooden wheel.

These tradesmen made wheels for carts (cartwheels), wagons (wains), traps and coaches and the belt drives of steam powered machinery. First constructing the hub (called the nave), the spokes and the rim/felloe segments (pronounced fellies) and assembling them all into a unit working from the center of the wheel outwards. Most wheels were made from wood, but other materials have been used, such as bone and horn, for decorative or other purposes. Some earlier construction for wheels such as those used in early chariots were bound by rawhide that would be applied wet and would shrink whilst drying, compressing and binding the woodwork together. After many centuries wheels evolved to be straked with iron, a method of nailing iron plates onto the felloes to protect against wear on the ground and to help bind the wheel together. Straking was considered to be a less skilled practice and could be done with less knowledge and equipment, this made the wheels easier to service without the need for a Blacksmith.

Over millennia the overall appearance of the wheel barely changed but subtle changes to the design such as dishing and staggered spokes helped keep up with the demands of a changing world. These small changes in design made a massive improvement to the strength of the wheel whilst reducing its weight, Vehicles then became more efficient to build and use.

Industrial age
This plate published in a volume of Encyclopédie in 1769 shows both methods of shoeing a wheel. In the centre the labourers are using hammers and "devil's claws" to fit a hoop onto the felloe, and on the right they're hammering strakes into place.

During the industrial age, iron strakes were replaced by a solid iron tyre custom made by a blacksmith after the Wheelwright had measured each wheel to ensure proper fit. Iron tyres that were always made smaller than the wheel in circumference, expanded by heating in a fire then hammered and pulled by devils claw (a levered hook) on the wheel, then it was released into the ducking pond where the afore mentioned work was conducted. This shrank it onto the wood, and closed the wooden joints. Some heavy duty wheels needed extra fastenings be they nailed or tyre bolts, the metalwork was pre-drilled, Tyre-bolts were less likely than tyre-nails to break off because they were bolted through the fillies. The nails were flush finished and countersunk into the wheel's outer surface. During the second half of the 19th century, the use of pre-manufactured iron hubs and other factory-made wood, iron and rubber wheel parts became increasingly common. Companies such as Henry Ford developed manufacturing processes that soon made the village wheelwright obsolete. With the onset of two world wars, the trade soon went into decline and was very rare by the 1960s and almost extinct by the year 2000. However, owing to the efforts of organisations like the Worshipful Company of Wheelwrights, wheelwrights still continue to operate in the UK. [2]

In modern times, wheelwrights continue to make and repair a wide variety of wheels, including those made from wood and banded by iron tyres. The word wheelwright remains a term usually used for someone who makes and repairs wheels for horse-drawn vehicles, although it is sometimes used to refer to someone who repairs wheels, wheel alignment, rims, drums, discs and wire spokes on modern vehicles such as automobiles, buses and trucks. Wheels for horse-drawn vehicles continue to be constructed and repaired for use by people who use such vehicles for farming, competitions and presentations of historical events such as reenactments and living history.

Wheelwrighting today

A modern wooden wheel generally consists of three main parts, the nave or hub at the centre of the wheel, the spokes radiating out from the centre and the felloes or rims around the outside. Generally the wheel would be bound by a steel or iron tyre depending on its historical period and purpose.

The main timbers used in a traditional wooden wheel are Elm for the nave, Oak for the spokes and Ash for the felloes although this can vary in some areas depending on availability of timber, climate and style of production. Sometimes Hickory is substituted for Oak and Ash as it is easier to bend for mass production and is quite springy for light wheels that require a bit of flexibility.

The Elm is used for its interwoven grain, this prevents the nave from splitting with the force of the spokes being driven in tight.

The Oak is used because it doesn't bend, compress or flex and transfers any load pressures directly from the felloes to the nave.

The Ash is used for its flexibility and springy nature, this acts as a form of suspension and protects against shock damage.

The future

In the second half of the 20th century wheelwright training faded away due to a lack of demand for new wooden wheels. The skills were kept alive by small businesses, museums, societies and trusts such as The Colonial Williamsburg Foundation (USA) and The Countryside Agency (UK).

The Worshipful company of Wheelwrights in London (UK) maintains a flourishing (government-backed) apprenticeship scheme that began in 2013.

Colonial Williamsburg (USA) has an ongoing apprenticeship program and has recently (2016) taken on new apprentices.

gollark: But only if you sacrifice your soul, of course.
gollark: Oh, yes, that too.
gollark: <#360890654961958922> now.
gollark: Have an enjoyable religion and culture-neutral winter solstice celebration!
gollark: <@483143218557616158> What?

See also

References
  1. Webster's New Collegiate Dictionary. ISBN 0-87779-338-7.
  2. David Einhorn (2010). Civil War Blacksmithing. CreateSpace Publishers. ISBN 978-1456364816.

Further reading

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.