USS Pensacola (LSD-38)

USS Pensacola (LSD-38) was an Anchorage-class dock landing ship of the United States Navy. She was the fourth Navy ship to be named for the naval town of Pensacola, Florida. She was built at Fore River Shipyard in Quincy, Massachusetts, and commissioned in 1971.

For other ships with the same name, see USS Pensacola.
History
United States
Name: USS Pensacola (LSD-38)
Awarded: 25 February 1966
Builder: Fore River Shipyard
Laid down: 12 March 1969
Launched: 11 July 1970
Commissioned: 27 March 1971
Decommissioned: 30 September 1999
Stricken: 30 September 1999
Fate: Sold to the Republic of China, 30 September 1999
Taiwan
Name: ROCS Hsu Hai (LSD-193)
Acquired: 30 September 1999
Commissioned: June 2000
Status: In service
General characteristics
Class and type: Anchorage-class dock landing ship
Displacement: 14,000 long tons (14,000 t) full load
Length: 553 ft (169 m)
Beam: 85 ft (26 m)
Draft: 18 ft (5.5 m)
Propulsion:
  • 2 × steam turbines
  • 2 × boilers, 600 psi (4.1 MPa)
  • 2 shafts
Speed: 22 knots (25 mph; 41 km/h)
Range: 14,800 nm at 12 knots
Boats & landing
craft carried:		 well deck size: 131.06 m × 15.24 m for 3 LCACs or 50 AAV7
Capacity:
  • vehicle garage (1,115 m²),
  • on upper deck: 2 LCM(6), on davits: 1 LCVP, and 1 LCPL
Troops: 330 man Marine detachment
Complement: 18 officers, 340–345 enlisted
Armament:

Operational history

In early 1995, the Commanding Officer of USS Pensacola was relieved because the preceding November, the ship had run aground off the East Coast. In 1995, while cruising in the Mediterranean, the ship suffered a major fuel leak, causing the ship to go to General Quarters. The fuel leak was repaired, and no one was injured. In 1996, USS Pensacola ran aground once again while en route to Newport, Rhode Island.

Transfer to the Republic of China

Pensacola was finally decommissioned in 1999, transferred to the Republic of China and redesignated ROCS Hsu Hai (LSD-193).

gollark: Also, possibly partly due to point 3, many (dynamic) languages actually implement YAML parsing in a way which allows arbitrary code execution by default. I think Python's yaml library does it unsafely by default (EDIT: see here: https://www.arp242.net/yaml-config.html though PyYaml at least appears to be changing this now).
gollark: It's not simple. The standard is extremely complex and there are something like nine ways to do multiline strings.
gollark: You might need to enable WAL mode.
gollark: It can do simultaneous reads fine as far as I know.
gollark: SQLite is surprisingly good for at least small projects which don't need to run multiple writes at once.

References


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.