USS Chimo (1864)

USS Chimo, a single-turreted, twin-screw monitor, was built by the Aquila Adams company in South Boston, Massachusetts, and launched 5 May 1864, and commissioned 20 January 1865, Acting Master John C. Dutch in command.

For other ships with the same name, see USS Chimo.
USS Chimo and USS Tonawanda. Beyond them is the ex-CSS Stonewall. Circa 1865–66
History
Name: USS Chimo
Ordered: April 1863
Builder: Aquila Adams Co.
Cost: ~$500,000
Launched: 5 May 1864
Commissioned: 20 January 1865
Decommissioned: 24 June 1865
Fate: Sold, 1874
General characteristics
Class and type: Casco class light-draft monitor
Tonnage: 1,175 tons
Length: 225 ft
Beam: 45 ft
Draft: 9 ft
Propulsion: Screw steamer
Speed: 9 knots
Complement: 65 officers and enlisted
Armament: 1 × 11 in Dahlgren Smoothbore gun, 1 × spar torpedo
Armor: Turret 8", pilothouse 10", hull 3", deck 3"

Chimo was a Casco-class, light-draft monitor intended for service in the shallow bays, rivers, and inlets of the Confederacy. These warships sacrificed armor plate for a shallow draft and were fitted with a ballast compartment designed to lower them in the water during battle.

Design revisions

Though the original designs for the Casco-class monitors were drawn by John Ericsson, the final revision was created by Chief Engineer Alban C. Stimers following Rear Admiral Samuel F. Du Pont's failed bombardment of Fort Sumter in 1863. By the time that the plans were put before the Monitor Board in New York City, Ericsson and Simers had a poor relationship, and Chief of the Bureau of Construction and Repair John Lenthall had little connection to the board. This resulted in the plans being approved and 20 vessels ordered without serious scrutiny of the new design. $14 million US was allocated for the construction of these vessels. It was discovered that Stimers had failed to compensate for the armor his revisions added to the original plan and this resulted in excessive stress on the wooden hull frames and a freeboard of only 3 inches. Stimers was removed from the control of the project and Ericsson was called in to undo the damage. He was forced to raise the hulls of the monitors under construction by nearly two feet and the first few completed vessels had their turrets removed and a single pivot-mount 11 inch Dahlgren cannon mounted. These same few vessels had a retractable spar torpedo added as well. The ironclads of this class were considered of poor design. Only eight were completed by the war's end, none of them seeing action.[1]

End of Civil War and sale

As a result, the Chimo sailed for New York, arriving 26 January 1865, to be refitted with the torpedo gear. On 1 April 1865 she departed for Hampton Roads where she arrived on the 9th. On 28 April she sailed for Point Lookout, NC, where she served as a station ship until 28 May 1865. Arriving at Washington Navy Yard 7 June 1865, she was decommissioned 24 June 1865. Her name was changed to Orion 15 June 1869; to Piscataqua 10 August 1869, and she was sold in 1874.


The plans for the torpedo mechanism on the modified Casco-Class monitors.

gollark: I'm a fish by the way.
gollark: ... why did I vote for that?
gollark: What happened? What was proposal 51 again?
gollark: (which is bad)
gollark: The hatcheries *are*, we must remember, programmed in PHP.

See also

References
  1. James M. McPherson (2012). War on the Waters: The Union and Confederate Navies, 1861-1865. Univ of North Carolina Press. pp. 206–. ISBN 978-0-8078-3588-3.

This article incorporates text from the public domain Dictionary of American Naval Fighting Ships. The entry can be found here.

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.