Kalamazoo-class monitor

The Kalamazoo-class monitors were a class of ocean-going ironclad monitors begun during the American Civil War. Unfinished by the end of the war, their construction was suspended in November 1865 and the unseasoned wood of their hulls rotted while they were still on the building stocks. If the four ships had been finished they would have been the most seaworthy monitors in the US Navy. One was scrapped in 1874 while the other three were disposed of a decade later.

Engraving of Kalamazoo
Class overview
Name: Kalamazoo class
Operators:  United States Navy
Preceded by: Miantonomoh class
Succeeded by: USS Puritan
Built: 1863–65
Planned: 4
Completed: 0
Scrapped: 4
General characteristics
Type: Monitor
Displacement: 5,600 long tons (5,700 t)
Tons burthen: 3,200 (bm)
Length: 345 ft 5 in (105.3 m)
Beam: 56 ft 8 in (17.3 m)
Draft: 17 ft 6 in (5.3 m)
Installed power:
  • 2,000 ihp (1,500 kW) (estimated)
  • 8 × Tubular boilers
Propulsion:
Speed: 10 knots (19 km/h; 12 mph)
Armament: 2 × 2 - 15-inch (381 mm) smoothbore Dahlgren guns
Armor:
  • Gun turret: 10-15 in? (254-381 mm)
  • Hull: 6 in (152 mm)
  • Deck: 3 in (76 mm)

Design and description

John Lenthall, Chief of the Bureau of Construction and Repair, ordered Benjamin F. Delano, naval constructor at New York City, to design a wooden-hulled ironclad that would carry her armament in two gun turrets. The deck was to be 3 feet (0.9 m) above the waterline and protected by 3 inches (76 mm) of armor. The ship's side armor was to be 10 inches (254 mm) thick, backed by 12–15 inches (305–381 mm) of wood; it was to cover the entire ship's side, down to a depth three feet below the waterline. It should carry enough coal to steam one week at full power with "sufficient speed to make good use of its ram".[1] Gideon Welles, Secretary of the Navy, called them enlarged versions of the Miantonomoh-class monitors with greater speed and "adapted to coast service", meaning more seaworthy.[2]

The Kalamazoo-class ships were 345 feet 5 inches (105.3 m) long overall and had a length between perpendiculars of 332 feet 6 inches (101.3 m). They had a beam of 56 feet 8 inches (17.27 m) and a draft of 17 feet 6 inches (5.3 m). The ships were designed to displace 5,660 long tons (5,750 t) and were 3,200 tons burthen.[3] They were the largest ships to be built in navy shipyards to date.[2]

Their unseasoned wooden hulls were massively reinforced by iron straps as well as iron stanchions to bear the enormous weight of their armor and guns. They retained the typical monitor overhang introduced by John Ericsson, designer of the Monitor, where the upper part of the hull was 42 inches (1,100 mm) wider than the lower part of the hull. The Kalamazoo's wrought iron side armor consisted of two layers of three-inch plates, backed by 21 inches of wood, six feet in height. The outer layer of armor extended 18 inches (460 mm) further below the waterline. The three-inch deck armor rested on 6 inches (152 mm) of wood and was covered in another three inches of wood.[2]

They were powered by two 2-cylinder horizontal direct-acting steam engines, each driving one 15-foot (4.6 m) propellers, using steam generated by eight tubular boilers.[2][Note 1] The engines were rated at 2,000 indicated horsepower (1,500 kW) and designed to reach a top speed of 10 knots (19 km/h; 12 mph).[4] They had a bore of 46.5 inches (1,181 mm) and a stroke of 50 inches (1,270 mm). Two large funnels were positioned between the turrets to handle the combustion gases from the boilers.[2] The Kalamazoos were intended to carry 500 long tons (510 t) of coal.[4]

The ships' main armament consisted of four smoothbore, muzzle-loading, 15-inch (381 mm) Dahlgren guns mounted in two twin-gun turrets.[2] Each gun weighed approximately 43,000 pounds (20,000 kg). They could fire a 350-pound (158.8 kg) shell up to a range of 2,100 yards (1,900 m) at an elevation of +7°.[5] The turrets were protected by 15 inches of armor.[Note 2][4]

Ships
Ship Builder[3] Namesake Renamed[3] Laid down[3] Suspended[3] Scrapped[3]
Kalamazoo Brooklyn Naval Shipyard, Brooklyn, New York Kalamazoo River[6] Colossus, 15 June 1869 1863 17 November 1865 1884
Passaconaway Portsmouth Naval Shipyard, Kittery, Maine Mount Passaconaway[7] Thunderer, 15 June 1869; Massachusetts, 10 August 1869 18 November 1863
Quinsigamond Boston Naval Shipyard, Boston, Massachusetts Lake Quinsigamond[8] Hercules, 15 June 1869; Oregon, 10 August 1869 15 April 1864
Shackamaxon[Note 3] Philadelphia Naval Shipyard, Philadelphia, Pennsylvania Shackamaxon[10] Hecla, 15 June 1869; Nebraska, 10 August 1869 late 1863 January 1874[9]

Construction and fate

Construction of the ships began between late 1863 and early 1864 and they were still being built when the war ended in early 1865. Construction was suspended on all four on 17 November 1865; they remained on the stocks. The ships were renamed, usually twice, in 1869 to conform to several new ship naming conventions. Vice Admiral David D. Porter ordered that Colossus be rebuilt to carry 10 large broadside guns and fitted with iron masts in a ship rig, but this never happened. The unseasoned wood in their hulls quickly began to rot after construction was suspended and they were broken up beginning in 1874.[2] Unusually, Passaconaway was condemned by an Act of Congress on 5 August 1882 before she was finally broken up in 1884.[11]

Notes
  1. Chesneau & Kolesnik claim that these were Martin boilers.[4]
  2. Silverstone claims that their armor was only 10 inches thick.[3]
  3. Also spelled Shakamaxon.[9]

Footnotes
  1. Canney, p. 124–25
  2. Canney, p. 125
  3. Silverstone 1989, p. 9
  4. Chesneau & Kolesnik, p. 122
  5. Olmstead, et al, p. 94
  6. Silverstone 1984, p. 456
  7. Silverstone 1984, p. 474
  8. Silverstone 1984, p. 477
  9. "Shakamaxon". Dictionary of American Naval Fighting Ships. Navy Department, Naval History and Heritage Command. Retrieved 1 January 2013.
  10. Silverstone 1984, p. 479
  11. "Passaconaway". Dictionary of American Naval Fighting Ships. Navy Department, Naval History and Heritage Command. Retrieved 1 January 2013.
gollark: `shell.allow_startup` wouldn't apply to them, for instance.
gollark: Anyway, I think there wouldn't be any *security* downsides to having CC boot custom BIOS files now, although maybe some usability ones?
gollark: There are no* downsides!
gollark: You'd get Unicode support, too!
gollark: Just copy the entire OC rendering code/frontend into CC.

References
  • Canney, Donald L. (1993). The Old Steam Navy: The Ironclads, 1842–1885. 2. Annapolis, Maryland: Naval Institute Press. ISBN 0-87021-586-8.
  • Chesneau, Roger; Kolesnik, Eugene M., eds. (1979). Conway's All the World's Fighting Ships 1860–1905. Greenwich, UK: Conway Maritime Press. ISBN 0-8317-0302-4.
  • Olmstead, Edwin; Stark, Wayne E.; Tucker, Spencer C. The Big Guns: Civil War Siege, Seacoast, and Naval Cannon. Alexandria Bay, New York: Museum Restoration Service. ISBN 0-88855-012-X.
  • Silverstone, Paul H. (1984). Directory of the World's Capital Ships. New York: Hippocrene Books. ISBN 0-88254-979-0.
  • Silverstone, Paul H. (1989). Warships of the Civil War Navies. Annapolis, MD: Naval Institute Press. ISBN 0-87021-783-6.

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.