Tyrrell 021
The Tyrrell 021 was a Formula One racing car designed by Mike Coughlan for Tyrrell Racing and raced during the 1993 season. The car was powered by a Yamaha V10 engine and was driven by Ukyo Katayama and Andrea de Cesaris. The car was unsuccessful with no points scored during the season. The 021 was replaced by the Harvey Postlethwaite designed 022 for the 1994 season.
![]() | |||||||||
Category | Formula One | ||||||||
---|---|---|---|---|---|---|---|---|---|
Constructor | Tyrrell Racing Organisation | ||||||||
Designer(s) | Mike Coughlan | ||||||||
Predecessor | 020C | ||||||||
Successor | 022 | ||||||||
Technical specifications[1] | |||||||||
Chassis | Carbon fibre monocoque | ||||||||
Suspension (front) | Double wishbone with pullrod operated coil springs | ||||||||
Suspension (rear) | Double wishbone with pullrod operated coil springs | ||||||||
Engine | 1993: mid-engine, longitudinally mounted, 3,493 cc (213.2 cu in), Yamaha OX10A, 72° V10, NA | ||||||||
Transmission | Hewland 6-speed sequential semi-automatic | ||||||||
Fuel | BP | ||||||||
Tyres | Goodyear | ||||||||
Competition history | |||||||||
Notable entrants | Tyrrell Racing Organisation | ||||||||
Notable drivers | 3. ![]() 4. ![]() | ||||||||
Debut | 1993 British Grand Prix | ||||||||
| |||||||||
Constructors' Championships | 0 | ||||||||
Drivers' Championships | 0 |
Complete Formula One results
(key)
Year | Team | Engine | Tyres | Drivers | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | Points | WCC |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1993 | Tyrrell | Yamaha OX10A V10 |
G | RSA | BRA | EUR | SMR | ESP | MON | CAN | FRA | GBR | GER | HUN | BEL | ITA | POR | JPN | AUS | 0 | NC | |
![]() |
Ret | 10 | 15 | 14 | Ret | Ret | Ret | |||||||||||||||
![]() |
NC | Ret | 11 | Ret | 13 | 12 | Ret | 13 |
gollark: The average programmer would just use a JSON parser and catch the errors.
gollark: You need either a rectifier thing or a commutator.
gollark: But the waterwheel as specified will make AC. The calculator uses DC, probably.
gollark: Technically, we just remotely read the buttons and write to the LCD using repurposed orbital mind control lasers.
gollark: * work
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.