Thingmaker

Thingmaker, also called Creepy Crawlers, is an activity toy made by Mattel, beginning in 1964. The toy consists of a series of die-cast metal moulds resembling various bug-like creatures, into which is poured a liquid chemical substance called "Plastigoop", which comes in assorted colours. The mould is then heated to about 390 °F (199 °C) in an open-face electric hot plate oven. The Plastigoop is cured by the heat, and when cooled forms semi-solid, rubbery replicas which can be removed from the mould.

"Creepy Crawlers" redirects here. For the animated series, see Creepy Crawlers (TV series). For the film, see Creepy Crawlers (film).

The concept of the Thingmaker was introduced in 1963, as part of Mattel's "Vac-U-Maker" set. This omnibus toy combined the new moulds and Plastigoop technology with the existing "Vac-u-form" machine, which molded simple sculptures by heating thin sheets of plastic, then using a vacuum pump to form the softened plastic over hard plastic forms. Following this introduction period, the Thingmaker portion was spun off as a separate set, and launched as the "Creepy Crawlers" line.

Mattel packaged moulds from various sets to be sold separately, and also combined moulds into larger omnibus editions, encompassing several themes into one set, under names such as "Triple Thingmaker", "Super Thingmaker" and "Every Thingmaker". Mattel produced many Thingmaker sets as follow-ups to the original "Creepy Crawlers" throughout the 1960s, utilising a variety of themes, aimed at both boys and girls. There were also several exclusive single mould sets, such as Superman and Tarzan, and original Mattel concepts including Squirtles and Gangly Danglies.

Varieties of Thingmaker mould sets
  • Giant Creepy Crawlers (1965) — This set featured nine moulds (as did the original "Creepy Crawlers"), but these new moulds featured just one giant creature apiece.
  • Fighting Men (1965) — This set of six moulds could be used to create mini soldier figures, using an innovative two-part mould to give the Fighting Men a front and a back. The set also included pieces of wire to place in the figure, making it bendable with the bottom wire protrusions being able to stand on a styrofoam base. Other moulds in the set created weaponry and equipment for the Fighting Men to carry into battle.
  • Creeple Peeple (1965) — This five-mould set formed strange heads, arms and feet. When assembled onto a pencil, they formed weird, Troll-like creatures.
  • Fun Flowers (1966) — Seven moulds full of different styles and shapes of flowers and leaves, for use in decorating and design.
  • Fright Factory (1966) — Five of this set's seven moulds were dedicated to creepy disguises, making pieces such as fake scars, snaggled teeth, or a third eye for one's forehead. Another mould (with a special insert) made a shrunken head, and the last made a dangly skeleton that one built from parts.
  • Incredible Edibles (1967)  - A Thingmaker that made edible pieces. It used a special goop called Gobble De-goop which was placed in molds and cooked like regular Plasti-goop.
  • Picadoos (1967) — A Thingmaker for artists. This one featured moulds with 10x10-space numbered grids. By carefully placing coloured Plastigoop in the grid, one could create decorative artwork in either beads, mosaic tile, or cross-stitch varieties.
  • Mini-Dragons (1967) — The eight moulds in this set formed wings, horns, claws, tails, and other body parts, which could be combined into various fantasy creatures.
  • Eeeeks! (1968) — In the same vein as Mini-Dragons, this set of eight moulds formed several varieties of mix-and-match legs, bodies, heads, wings, antennae, etc., to create large, bizarre insects.
  • Zoofie-Goofies (1968) — Seven moulds form heads, bodies and feet of various animals, from cats and dogs to elephants and lions.
  • Hot Wheels Factory (1969) Moulds made two piece bodies that fit together with wheels embedded into the bottom mould so you could make your own Hot Wheels cars.
  • DollyMaker (1969) — Five two-sided moulds are used to create two styles of little dolls, and a wardrobe of late '60s fashions and accessories for them.
  • Super Cartoon Maker (1969) — A licensed Thingmaker, the eight moulds in this set form replicas of Charles Schulz's Peanuts characters, such as Snoopy, Charlie Brown and Lucy.
  • Jillions of Jewels (1970) — The last of the classic Mattel Thingmakers. The set had five moulds, but instead of the liquid Plastigoop, these formed solid plastic "gemstones" and jewelry frames from two kinds of powdered "Jewel Dust" compounds.

It is generally believed that production of the original Mattel Thingmakers was discontinued following consumer safety concerns over allowing children to use a small electric heater as a toy.

In 1978 Mattel released an updated (and safer) model of their "Creepy Crawlers" toy. Called the "Thingmaker II", this version used a very differently formulated Plastigoop, and used plastic moulds, into which was poured the heated Plastigoop. In this set one heated the Plastigoop and poured it into the green plastic mould(s) to cool; the moulds were not put into the heater, which looked like a small cauldron. The reformulated Plastigoop did not work well and the process of making bugs, etc. with these sets was typically slow, taking an hour or so to make a creation. Needless to say, the late 1970s sets did not work as well as their predecessors, and the attempted revival was a short-lived one. Only two sets were produced - Creepy Crawlers and Flower Fun.

ToyMax revival
An early version of the ToyMax "Magic Maker" Creepy Crawlers Oven Set

After being out of production for more than a decade, the "Creepy Crawlers" brand was brought back in 1992 by a New York-based company called ToyMax. With much stricter safety regulations in place, the new version of the Creepy Crawlers set re-introduced the metal moulds and earlier Plastigoop-type formulation, but now used a lightbulb-powered "Magic Maker" heater, with a heat-triggered door designed to remain closed until the mould had cooled sufficiently to be handled safely.

The name "Magic Maker", as well as the new oven design, were borrowed from an earlier 1980s-era toy that melted clear coloured plastic granules to form sun catcher window decorations. Over the next five years new mould designs were released as well as new mould packs. Apparently Mattel, the originator of Creepy Crawlers, had let its trademarks lapse, for many of the original Mattel concepts were revisited, such as "Creeple Peeple", "Mini-Dragons", "Eeeks" (ToyMax changed the spelling), and "DollyMaker". Numerous licenses were also employed, resulting in mould designs featuring such characters as Bugs Bunny, The Mighty Morphin Power Rangers, Batman, Woody, Buzz Lightyear, Rex, Hamm and the Green Army Men from Toy Story, and The Mask. The new formula Plasti-Goop had an array of colours, and several varieties, including

  • Glow In the Dark Plasti-Goop
  • Scented Glamour-Goop
  • Glitter Glamour-Goop
  • Stretch Plasti-Goop
  • Metallic Plasti-Goop
  • Colour Change Plasti-Goop
  • Plasti-Steel (Rigid -Goop for use in toy car bodies)
  • Eraser Plasti-Goop.

Toward the end of the ToyMax run, the oven was redesigned to incorporate a fold-down hinged door, and required less at-home assembly. Releases of new mould packs became more and more sporadic over time. In 1997, a wave of moulds (and a new oven set) based on the second Jurassic Park film, and an original line of "Mutant Squad" Plasti-Goop-based figures (three of the six planned "Mutants" were never released) heralded the end of another era of "Thingmaking", and the beginning of a third period of hiatus. In 2001, ToyMax tried again, with both a "Creepy Crawlers" and a "DollyMaker" line, but this revival was brief.

After ToyMax

Since then, a third company, Jakks Pacific, based in California, has taken up the reins of producing Creepy Crawlers toys. Although most of the Jakks Pacific line merely re-used mould designs from the extensive ToyMax oeuvre, they have also produced new character moulds featuring SpongeBob SquarePants and Hello Kitty. New releases of oven sets and mould packs have been sporadic, and seem to come very much at random. Although Christmas 2006 saw release of three "new" mould designs at the hands of Jakks Pacific, the numbering of these moulds seems to suggest that they are actually unreleased designs from the ToyMax era.

In 2007, Jakks Pacific released a Pokémon-themed Creepy Crawlers Oven and Mould Paks, and in late 2008, another Oven Set based on the Star Wars: Clone Wars license was released, again just in time for Christmas gift-giving.

In the Autumn of 2010, Toys "R" Us stores released a line of exclusive "Creepy Crawlers" Activity Toys (produced by Jakks-Pacific) that use injection moulding and hollow, two-sided moulds to create bugs and spiders in solid, wall-crawling and gut-filled "squishable" varieties. Reviews on the Toys "R" Us site indicate numerous problems with the moulds leaking in the Creepy Crawlers injector models.

As of Spring 2012, the once-exclusive Jakks-Pacific "Creepy Crawlers" sets and refill accessories are available at other outlets, such as K-Mart and Target.

Cancelled 3D printer

In 2016, Mattel announced a new version of the ThingMaker, capable of 3D printing toys.[1] The 3D printer version was originally planned for an Autumn 2016 release, but it was pushed to 2017.[2] However, the printer wasn't even released then, and replying to a Twitter comment, Mattel confirmed on November 20, 2017, that plans for the 3D printer version are still being reviewed, and a firm release date has not yet been set, adding that they are working hard to deliver a product that families will love, and once they have more information, they'd report it at their website.[3] Since then, the website went offline. In another Twitter reply, on March 28, 2019, it was revealed that Mattel had discontinued and cancelled the project, and apologized for not delivering any better news for it.[4]

In other media

Television show

ToyMax developed their own entertainment property based on the Creepy Crawlers concept, which became a Saturday morning cartoon — the series lasted two seasons (23 episodes, including one unaired episode that later saw release on video) and a line of 12 action figures that each came with a metal mould, with which to make unique accessories for the figures.

Film adaptation

In May 2018, it was announced that a film based on Creepy Crawlers is in development. The film rights were acquired by Paramount Pictures. It's scheduled to be produced by Paramount Players and Original Film. The upcoming film's producers include Neal H. Moritz, Marc Gurvitz and Toby Ascher. Stephen Berman, chairman and CEO of JAKKS Pacific, will serve as executive producer. [5]

gollark: osmarks internet radio™.
gollark: racist.
gollark: What?
gollark: It's a cat.
gollark: [EXPUNGED]

References
  1. https://www.msn.com/en-us/music/story/matel-unveils-rebooted-thingmaker-as-3d-printer/vi-BBpqsoR
  2. https://techcrunch.com/2016/09/27/mattels-thingmaker-the-3d-printer-that-let-kids-make-their-own-toys-delayed-until-next-year/
  3. https://twitter.com/Mattel/status/932608813131108353
  4. https://twitter.com/mattel/status/1111341057365762048?s=21
  5. Justin Kroll (May 29, 2018). "Paramount Players Lands Film Rights to Creepy Crawlers Toy Brand (EXCLUSIVE)". Variety. Retrieved July 13, 2018.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.