Roland MC-202

The Roland MC-202 (MicroComposer) is a monophonic analog synthesizer and music sequencer released by Roland in 1983. It was the first groovebox.[1] Its synth is similar to the TB-303 bass synth and the SH-101 synthesizer, featuring one voltage-controlled oscillator with simultaneous saw and square/pulse-width waveforms. It is a successor to the Microcomposer family of sequencers, including the MC-8 and MC-4.[2] The unit is portable and can be operated from batteries or an external power supply.

This article is about a Roland synthesizer. For the Italian MC.202 fighter aircraft, see Macchi C.202.
MC-202 MicroComposer
Roland MC-202
ManufacturerRoland
Dates1983–1985
Price$595
Technical specifications
PolyphonyMonophonic
TimbralityMonotimbral
Oscillator1 VCO
LFO1 sine
Synthesis typeAnalog Subtractive
Filter1 resonant lowpass
Attenuator1 ADSR
Aftertouch expressionNo
Velocity expressionNo
Storage memory2 tracks
EffectsNone
Input/output
Keyboard2​1⁄2 oct rubber buttons
External controlCV/Gate

Synthesizer

The internal synthesizer features one voltage-controlled oscillator with simultaneous saw, square/pulse-width and sub-octave square waveforms. Additionally there is a 24dB Low Pass filter, an LFO and a single ADSR envelope generator.

In terms of circuitry, it is nearly identical to the earlier SH-101 synthesizers but lacks the noise generator, choice of LFO shapes and modulation/pitch bend controls. However, unlike the SH-101, it does include a delay on the LFO. The two units also share a design aesthetic in terms of the control layout, casing, lettering, knobs and slider caps.

Sequencer

The MC-202 includes a sequencer that can play back two separate sequences simultaneously. Two sets of CV/Gate connectors on the rear of the unit allow for routing the sequences to external synthesizers. One of the two sequences is used to control the internal synthesiser. The sequencer is programmed much like Roland's early digital MC-4 and MC-8 Microcomposer sequencers, whereby notes are entered with pitch, length and gate length. Additionally, each note in the sequence can have an accent and slide, which is similar to the TB-303 and allows for so called acid sequences. The SH-101 lacks the ability to programme accents.

The sequences are lost if the unit is powered down, however a tape interface is provided so that sequences can be stored to and recalled from an audio tape recorder.

There are DIN sync inputs and outputs which allow the unit to synchronise playback, either as master or slave, with other DIN sync-equipped instruments such as the TB-303 or the Roland TR-808. The unit can also generate and sync to frequency-shift keying signals from a tape recorder. The MC-303 was built in 1996 and is a digital successor of the MC-202.

Computer-based sequencer programming

In 1997, Defective Records Software released MC-202 Hack, a software application that enables programming of the MC-202's sequencer on computer. It works by creating audio that is routed into the MC-202's cassette input port. It allows for MIDI files to be converted to MC-202 sequences. This eliminates the need to use the MC-202 keys to enter sequence information. Version 2 of the software (released in 2009) also allows sequences programmed directly on the MC-202 to be converted back into MIDI files.

gollark: Isn't autobias amazing?
gollark: ++choose 1000 "lyric bad" "lyric good"
gollark: As you can see, o and o are separate.
gollark: It is.
gollark: ++choose 1000 a p i o f o r m

References
  1. Roland MC-202 MicroComposer, Electronic Musician, November 2001
  2. Chris Carter, ROLAND MC8 MICROCOMPOSER, Sound on Sound, Vol.12, No.5, March 1997

Further reading
  • "Roland MC-202". Future Music. No. 76. November 1998. ISSN 0967-0378. OCLC 1032779031.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.