RPG-6
The RPG-6 (Russian Ruchnaya Protivotankovaya Granata, "Handheld Anti-Tank Grenade") was a Soviet-era anti-tank hand-grenade used during the late World War II and early Cold War period.
RPG-6 (РПГ-6) | |
---|---|
Type | Anti-tank grenade[1] |
Place of origin | Soviet Union |
Service history | |
In service | October 1943 – |
Used by | Soviet Union and Warsaw pact countries |
Wars | World War II |
Production history | |
Designer | M. Z. Polevikov[1] L. B. Ioffe[1] N. S. Zhitkikh[1] |
Designed | 1943[1] |
Specifications | |
Mass | 1.13 kg[1] |
Length | 337 mm |
Diameter | 103 mm |
Filling | TNT shaped charge |
Filling weight | 0.6 kg[1] |
Detonation mechanism | Impact fuze[1] |
History
The RPG-6 was designed as a replacement for the RPG-43 after the Battle of Kursk.[1]
It underwent testing in September 1943, and was accepted into service in October 1943.[1] First RPG-6 grenades were used against Nazi troops in last week of October 1943[2].
The weapon was a success and went into mass production in late 1943. During the war, RPG-6 grenades being used alongside the RPG-43.[1]
In the USSR, some grenades were kept in storage even after the end of the World War II.[1]
Design
It operated on the "Munroe effect" principle, in which a metal-lined cone-shaped explosive charge would generate a focused jet of hot metal that could penetrate armor-plate.[1]
It was a conical casing enclosing a shaped charge and containing 562 grams of TNT, fitted with a percussion fuse and four cloth ribbons to provide stability in flight after throwing. It could penetrate approximately 100 millimeters of armour. The RPG-6 had a fragmentation radius of 20 metres from the point of detonation, and proved useful against infantry as well as tanks.
The RPG-43 had a large warhead, but was designed to detonate in contact with a tank's armour; it was later found that optimal performance was gained from a HEAT warhead if it exploded a short distance from the armour, roughly the same distance as the weapon's diameter. In the RPG-6 this was achieved by adding a hollow pointed nose section with the impact fuse in it, so that when the weapon detonated the warhead was at the optimum distance from the armour.
References
- Семен Федосеев. Против танка // журнал "Оружие", № 2, 2000. стр.59-63
- Оружие Победы / колл. авт., отв. ред. В. Н. Новиков. 2-е изд., пер. и доп. М., "Машиностроение", 1987. стр.427