Preamplifier

A preamplifier (preamp or "pre") is an electronic amplifier that converts a weak electrical signal into an output signal strong enough to be noise-tolerant and strong enough for further processing, or for sending to a power amplifier and a loudspeaker. Without this, the final signal would be noisy or distorted. They are typically used to amplify signals from analog sensors such as microphones and pickups. Because of this, the preamplifier is often placed close to the sensor to reduce the effects of noise and interference.

"Preamp" redirects here. For the device used in professional audio, see Microphone preamplifier.
An example of a typical high-end stereo preamplifier.

Description

An ideal preamp will be linear (have a constant gain through its operating range), have high input impedance (requiring only a minimal amount of current to sense the input signal) and a low output impedance (when current is drawn from the output there is minimal change in the output voltage). It is used to boost the signal strength to drive the cable to the main instrument without significantly degrading the signal-to-noise ratio (SNR). The noise performance of a preamplifier is critical. According to Friis's formula, when the gain of the preamplifier is high, the SNR of the final signal is determined by the SNR of the input signal and the noise figure of the preamplifier.

Three basic types of preamplifiers are available:

Audio systems

In an audio system, they are typically used to amplify signals from analog sensors to line level. The second amplifier is typically a power amplifier (power amp). The preamplifier provides voltage gain (e.g., from 10 mV to 1 V) but no significant current gain. The power amplifier provides the higher current necessary to drive loudspeakers. For these systems some common sensors are microphones, instrument pickups, and phonographs. Preamplifiers are often integrated into the audio inputs on mixing consoles, DJ mixers, and sound cards. They can also be stand-alone devices

Examples
gollark: GTech™ is manipulating the refractive index of the local air.
gollark: Did you know? It was already too late. The bees had approached. GTech™ dominion over reality had begun, and none could escape. One night the bees reached the horizon of the sun, and all the specks began. The swarms of specks, all over the city, and even over the whole town. It would be next year that the bees reached the horizon on the night of December 14, 2011. After a week of resting they came to the end of October. They were too exhausted to continue their journey even upon midnight. In the morning they returned to the city to continue their "trip" that came along with the plague. The evening afternoon after dawn, they crossed to the eastern edge of the city, and began their journey on the night of December 15th. The next day, the bees went on their trip to the west of the city. They went on their journey along the northern coast with an aeroplane. When they arrived in the coast of the east of the city, they had a night sleep, as they had not come along the northern coast any further.
gollark: According to the osmarks.net™ future predictor cuboid™ you are actually.
gollark: Written in Macron, self-bootstrapping, and running literally everything optimally and hypermacronously.
gollark: As opposed to the upcoming MacronOS™.

See also
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.