Pilkichha

Pilkichha is a village in Khutahan, Jaunpur district, Varanasi division, Uttar Pradesh, India.[1]

  • Tehsil Name: satyampur
  • District: Jaunpur
  • State: Uttar Pradesh
  • Division: Varanasi
  • Language: Hindi and Urdu
  • Time zone: IST (UTC+5:30)
  • Elevation / Altitude: 84 meters above sea level
  • Telephone Code / Std Code: 05364
  • Pin Code: 223107
  • Post Office Name: Pilkichha

Overview of Pilkichha

Pilkichha is biggest gram sbha in the Jaunpur district. Some time ago it name called as kilkichha but current it call as pilkichha. Some time ago it was having bridge made of wood and pipa but no now. Edit below overview about Pilkichha

Jaunpur, Mau, Sultanpur, Azamgarh are the nearby Cities to Pilkichha.

Demographics of Pilkichha

Hindi is the Local Language here.

Communications

There is no railway station near to Pilkichha in less than 10 km. However Azamgarh railway station is major railway station 69 km near to Pilkichha

Education

Colleges near Pilkichha

Gram Vikas Inter College Khuthan Address : National Intermediate College Pattinarendrapur Address : Madarsa Arbia Riyazul Ulom Address : Baddopur. Shahganj. Jaunpur.u.p...india Madarsa Darul Uloom Address : Baddopur Shahganj Jaunpur Mr.raviraj Post Greaduat College Nauli Jaunpur Address : Nauli Jaunpur Up

Schools near Pilkichha

Samajvadi I.c. Gabhiran Address : gabhiran, khuthan, jaunpur, Uttar Pradesh . PIN- 222104

Inter College Ranipur Address : rani pur, khuthan, jaunpur, Uttar Pradesh . PIN- 222104

Brijesh I.c.gulalpur Address : gulal pura, khuthan, jaunpur, Uttar Pradesh . PIN- 222139, Post - Khetasarai

Baba M.d.j.h.s.mubarakpur Address : mubarak pur, khuthan, jaunpur, Uttar Pradesh . PIN- 222104

Administrative division

Sub Villages in Pilkichha

  • Khobhariya
  • Harikapura
  • Kastura
  • Kokana
  • Malikpatti
  • Nakabi
  • Taniya
  • Viasiya
  • Daulatpur
  • Tanaya
  • Rampur
gollark: Messages are sent to/from SPUDNET by websocket.
gollark: It's divided into channels, for which keys can be managed separately.
gollark: You need a special key (managed via the HKI system) to connect as an admin, but none as a client.
gollark: The basic idea is that your client devices run a ~~backdoor~~ remote debugging interface which receives commands from admin systems connected to SPUDNET.
gollark: Also some protocol docs for v4 written for heavpoot, which cover the MAIN features but not HKI or reports.

References

  1. http://eci.nic.in/archive/se2002/pollupd/ac/states/s24/acnstcand241.htm Election Commission data, retrieved on 11 August 2010

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.