Pier (architecture)

A pier, in architecture, is an upright support for a structure or superstructure such as an arch or bridge. Sections of structural walls between openings (bays) can function as piers.

This article is about the architectural support. For other uses, see Pier (disambiguation).
The Pont du Gard (c.19 BC), Nîmes; 3 rows of piers with arches springing from them to support the bridge.

Description

The simplest cross section of the pier is square, or rectangular, but other shapes are also common. In medieval architecture, massive circular supports called drum piers, cruciform (cross-shaped) piers, and compound piers are common architectural elements.

Columns are a similar upright support, but stand on a round base. In buildings with sequence of bays between piers, each opening (window or door) between two piers is considered a single bay.

Bridge piers
A concrete girder bridge pier during construction prior to installation of the bridge deck and parapets, consisting of multiple angled pylons for support (bottom), a horizontal concrete cap (center), and girders (top) with temporary wood bracing
Quadruple support piers for the fly-over at the traffic junction 24 Oktoberplein (Utrecht, Netherlands)

Single-span bridges have abutments at each end that support the weight of the bridge and serve as retaining walls to resist lateral movement of the earthen fill of the bridge approach.[1] Multi-span bridges require piers to support the ends of spans between these abutments. In cold climates, the upstream edge of a pier may include a starkwater to prevent accumulation of broken ice during peak snowmelt flows. The starkwater has a sharpened upstream edge sometimes called a cutwater. The cutwater edge may be of concrete or masonry, but is often capped with a steel angle to resist abrasion and focus force at a single point to fracture floating pieces of ice striking the pier. In cold climates, the starling is typically sloped at an angle of about 45°  so current pushing against the ice tends to lift the downstream edge of the ice translating horizontal force of the current to vertical force against a thinner cross-section of ice until unsupported weight of ice fractures the piece of ice allowing it to pass on either side of the pier.[2]

Examples
The Arc de Triomphe, Paris, supported by 4 massive planar piers.

In the Arc de Triomphe, Paris (illustration, right) the central arch and side arches are raised on four massive planar piers.

St Peter's Basilica
Original plan by Bramante for St Peter's Basilica (Rome).

The original plan by Donato Bramante for St Peter's Basilica in Rome has richly articulated piers, rendered in solid black (illustration, left). The vaulting they support is in double lines, a familiar representation convention in architectural plans. Four piers support the weight of the dome at the central crossing. These piers were found to be too small to support the weight and were changed later by Michelangelo to account for the massive weight of the dome.[3]

The piers of the four apses that project from each outer wall are also strong, to withstand the outward thrust of the half-domes upon them. Many niches articulate the wall-spaces of the piers.[3]

Montacute House (c.1598), England: piers of the long gallery have niches with statues of the 'Nine Worthies'.




gollark: Haircuts are uncool. I avoid them even during non-pandemic times.
gollark: People actually *did* that? Why?
gollark: That's subjective.
gollark: No, but I don't think it's very good.
gollark: It's not enforced until October, mind.

See also

References
  1. Abbett, Robert W. (1957). American Civil Engineering Practice. III. New York: John Wiley & Sons. pp. 26–32.
  2. Urquhart, Leonard Church (1959). Civil Engineering Handbook (4th ed.). New York: McGraw-Hill Book Company. pp. 8–75.
  3. M. Fazio, Buildings Across Time, 312
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.