Palace of the Argentine National Congress

The Palace of the Argentine National Congress (Spanish: Palacio del Congreso Nacional Argentino, often referred locally as Palacio del Congreso) is a monumental building, seat of the Argentine National Congress, located in the city of Buenos Aires. It is located in the barrio of Balvanera at its limit with Monserrat, an area informally known as the Congreso neighbourhood.

Palace of the Argentina National Congress
Palacio del Congreso Nacional Argentino
View of main facade
Location in Buenos Aires
Alternative namesPalacio del Congreso
General information
Architectural styleNeoclassical
Town or cityBuenos Aires
CountryArgentina
Coordinates34°36′34.75″S 58°23′33.29″W
Current tenantsGovernment of Argentina
Construction started1898 (1898)
Completed1946 (final details)
Inaugurated1906
CostUS$6 million
ClientGovernment of Argentina
OwnerGovernment of Argentina
Height80 m (260 ft)
Technical details
Floor count6
Floor area39,210 m2 (422,100 sq ft)
Design and construction
Architect
Other designers
Main contractorPablo Besana y Cía.
National Historic Monument of Argentina

Constructed between 1898 and 1906, the palace is a National Historic Landmark. The Kilometre Zero for all Argentine National Highways is marked on a milestone at the Congressional Plaza, next to the building.

History

The Palace of Congress under construction, 1906.

The idea of a congressional palace was first proposed and decreed in 1895.[1]

Designed by the Italian architect Vittorio Meano and completed by Argentine architect Julio Dormal, the building was under construction between 1898 and 1906. Inaugurated that year, its aesthetic details were not completed until 1946. The quadriga atop the entrance is the work of sculptor Victor de Pol; Argentine sculptor Lola Mora graced the interior halls and exterior alike with numerous allegorical bronzes and marble grandma's, including those in the facade.

The edifice was built at a cost of US$6 million allocated by the federal government.[2]

The building was officially accepted by Congress on 12 May 1906.[3] As time went by, the building proved too small for its purpose, and in 1974 the construction of the Annex, which now holds the Deputies' offices, was started.

From 1976 to 1983 the palace housed the Legislative Advisory Commission (CAL), which was a group of officers from the three Armed Forces.

Congressional Plaza, built by French Argentine urbanist Charles Thays, faces the palace. Popular among tourists since its inauguration in 1910, the plaza is also a preferred location for protesters and those who want to voice their opinion about congressional activities.

Architecture

The Congress today.

The palace is in Neoclassical style, largely made of white marble with elaborately furnished interiors, especially in the Lost Steps Hall and the Blue Room.[3] It is crowned by a bronze-plated dome 80 metres (260 ft) in height, weighing 3,000 tonnes (3,000 long tons; 3,300 short tons), weathered to green color. This cupola is supported over a 10 metres (33 ft) deep inverted dome foundation.[4] The dome is lit during Argentina’s national holidays and other special occasions.[4]

The main entrance, called the Entrada de Honor ("Honor Entrance"), is exclusively used for ceremonial purposes. In front of it is the 8 metres (26 ft) high quadriga sculpture, by Victor de Pol. It is made of bronze and weighs 20 tonnes (20 long tons; 22 short tons). A symbol of the Argentine Republic, it follows the typical depiction of Roman Empire generals making a declaration of Victory but in this case it is driven by the symbolic Liberty holding the reins of the horses.[5]

The palace used to have a barber shop in the basement but it was demolished.[3]

Statues Recovery

In 1997, with the first general restoration of facades, representatives of the Government of Buenos Aires promoted the recovery of the statues designed by Lola Mora to crown the entrance to Congress. As the sculptor had personally donated to the government of province of Jujuy, the only thing possible was to make rubbings to place in Buenos Aires. However, at that time the idea did not materialize.

Only in 2012, with the new Master Plan, the initiative gained momentum again and began to take shape. The government of Jujuy reaffirmed its ownership of the statues of Mora, so that Congress signed a treaty for the restoration of the original and creating two copies of each work by a 3D mapping, which began in January 2013. the original had suffered deterioration caused by hundred years of outdoor exposure, so it must be kept in a closed and adequate space, while one group of rubbings will be placed in its place in the Government House of Jujuy, and the other set of rubbings will be placed in the original spaces of the National Congress.

On 1 March 2014 replicas of the statues were inaugurated by President Cristina Fernandez de Kirchner at the opening of the regular session.

gollark: What? We obviously doubled (and still double) the performance every 62 minutes, not 18 months.
gollark: Not contemporary GTech™ 512-bit quaternary-quaternionic-posit processors?
gollark: And they will never have more than 48 bits used for addressing.
gollark: This is valid as all devices have x86_64 CPUs, yes.
gollark: You should use 16 HIGH bits as a flag, as my x86 CPUs all appear to only have 48-bit virtual addressing.

See also

References

Web
  1. "Historia del Congreso de la Nación" (in Spanish). Archived from the original on 29 May 2013. Retrieved 17 May 2013.
  2. IBAM 1903, p. 76ff.
  3. "Silence Ends at Argentina's Congressional Palace". The Spartanburg Herald. 24 May 1973.
  4. de Dios 2010, pp. 38ff.
  5. "AfterLife: Documenting Recoleta Cemetery in Buenos Aires since 2007". Recoleta Cemetery Guides. Retrieved 17 May 2013.
Bibliography
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.