Nanak Shahi bricks

Nanakshahi bricks ( ਨਾਨਕਸ਼ਾਹੀ ਇੱਟ ) were decorative bricks used for structural walls during the Mughal era.[1]

Uses

This variety of brick tiles were of moderate dimensions and could be used for reinforcing lime concretes in the structural walls and other thick components. But, as they made moldings, cornices, plasters, etc. easy to work into a variety of shapes, they were more often used as cladding or decorative material.

The Nanakshahi Bricks were less than 3/4 in every dimension from the contemporary bricks used in India nowadays those are 9 × 4¼ × 2¾ inches

General specs

More often than not, the structures on which they were used, especially the Sikh temples (Gurudwaras),[2] were a combination of two systems: trabeated and post-and-lintel, or based on arches. The surfaces were treated with lime or gypsum plaster which was molded into cornices, pilasters, and other structural as well as non-structural embellishments.[3] Brick and lime mortar as well as lime or gypsum plaster, and lime concrete were the most favoured building materials, although stone (such as red stone and white marble) were also used in a number of shrines.[4] Many fortresses were built using these bricks.[5]

gollark: It's 15 minutes or so and you basically just have to move it/water between pots a few times.
gollark: For example, pasta is trivial to make and can be bought in bulk.
gollark: You could just cook food.
gollark: You cannot operate anticorruption arbitrarily well, and would probably just push marketing into deniable stuff like social media "influencers".
gollark: Hahahahahahano.

See also

References

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.