Mortier de 270 mm modèle 1885

The Mortier de 270 mm modèle 1885 was a French heavy mortar employed as siege artillery during the First world war.

Mortier de 270 mm modèle 1885
TypeHeavy mortar
Siege artillery
Place of originFrance
Service history
Used byFrance
WarsWorld War I
Production history
DesignerCharles Ragon de Bange
Designed1885
Produced1885
No. built32
Specifications
Mass16.5 t (16 long tons)
Barrel length3.35 m (11 ft) L/12

ShellSeparate loading bagged charges and projectiles
Shell weight180–230 kg (400–510 lb)
Caliber270 mm (11 in)
Breechde Bange
RecoilHydraulic recoil mechanism
Elevation0° to +70°
Traverse30°
Rate of fire1 shot every three minutes
Muzzle velocity155–355 m/s (510–1,160 ft/s)
Maximum firing range8 km (5 mi)

History

The Mortier de 270 mm G mle 1885 was one of a series of heavy artillery pieces designed by Colonel Charles Ragon de Bange. On 11 May 1874 three de Bange heavy cannons (120 mm, 155 mm, 240 mm) and two mortars (220 mm, 270 mm) were ordered by the French Army.

The mle 1885 was advanced for its time due to being built completely of steel instead of a steel liner and cast iron reinforcing hoops of the previous Canon de 240 mm C mle 1870-87. The later Mortier de 270 mm modèle 1889 was based on the mle 1885 and adapted to the coastal artillery role by fitting the same barrel to a different carriage.[1]

Although the majority of combatants had heavy field artillery prior to the outbreak of the First World War, none had adequate numbers of heavy guns in service, nor had they foreseen the growing importance of heavy artillery once the Western Front stagnated and trench warfare set in. Fortresses, armories, coastal fortification and museums were scoured for heavy artillery and sent to the front. Suitable field and rail carriages were built for these guns in an effort to give their forces the heavy field artillery needed to overcome trenches and hardened concrete fortifications.[2]

Design

The mle 1885 was breech loaded with a de Bange obturator, and used separate loading bagged charges and projectiles.[1] The recoil system for the mle 1885 consisted of a U shaped gun cradle which held the trunnioned barrel and a slightly inclined firing platform with hydraulic buffers. When the gun fired the hydraulic buffer slowed the recoil of the cradle which slid up a set of inclined rails on the firing platform and then returned to position by the combined action of the buffers and gravity. The carriage allowed for high angles of elevation and pivoted at the front for 30° of traverse.[3]

At the outbreak of the First World War, it is estimated there 32 mle 1885's available. For transport the mle 1885 could be broken down into four wagon loads for horse or motor traction. The mortars could also be transferred to 60 cm (24 in) narrow gauge rail wagons for the final leg to their firing positions.[4] These narrow gauge tracks were also used to re-position the mortars and bring up their ammunition and supplies. Site preparation needed up to 15 men directed by 2 officers and took 7-8 hours. Site preparation included creating a base of wooden beams then assembling the mortar with cranes and block & tackle.[3]

Weapons of comparable performance and era

gollark: No. Vote Gibson so we can get an election later.
gollark: Umnikos may be too friendllylyly with you.
gollark: No, not really.
gollark: What? Is that a good idea? I'm not sure umnikos is the right choice.
gollark: Palaiologos did ages ago.

References

  1. "Mortier de 270 modèle 1884 - Grande Guerre". www.fortiffsere.fr. Retrieved 2018-06-24.
  2. Hogg, Ian (2004). Allied artillery of World War One. Ramsbury: Crowood. pp. 129–134. ISBN 1861267126. OCLC 56655115.
  3. "Mortier de 270 mle 1885 De Bange - WO1Wiki". www.forumeerstewereldoorlog.nl (in Dutch). Retrieved 2018-06-25.
  4. "La voie de 60 système Pechot-Decauville - FortiffSéré". www.fortiffsere.fr. Retrieved 2018-06-24.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.