Cross entropy

In information theory, the cross entropy between two probability distributions ${\displaystyle p}$ and ${\displaystyle q}$ over the same underlying set of events measures the average number of bits needed to identify an event drawn from the set if a coding scheme used for the set is optimized for an estimated probability distribution ${\displaystyle q}$, rather than the true distribution ${\displaystyle p}$.

Definition

The cross entropy of the distribution ${\displaystyle q}$ relative to a distribution ${\displaystyle p}$ over a given set is defined as follows:

${\displaystyle H(p,q)=-\operatorname {E} _{p}[\log q]}$,

where ${\displaystyle E_{p}[\cdot ]}$ is the expected value operator with respect to the distribution ${\displaystyle p}$. The definition may be formulated using the Kullback–Leibler divergence ${\displaystyle D_{\mathrm {KL} }(p\|q)}$ from ${\displaystyle p}$ of ${\displaystyle q}$ (also known as the relative entropy of ${\displaystyle q}$ with respect to ${\displaystyle p}$).

${\displaystyle H(p,q)=H(p)+D_{\mathrm {KL} }(p\|q)}$,

where ${\displaystyle H(p)}$ is the entropy of ${\displaystyle p}$.

For discrete probability distributions ${\displaystyle p}$ and ${\displaystyle q}$ with the same support ${\displaystyle {\mathcal {X}}}$ this means

${\displaystyle H(p,q)=-\sum _{x\in {\mathcal {X}}}p(x)\,\log q(x)}$

(Eq.1)

The situation for continuous distributions is analogous. We have to assume that ${\displaystyle p}$ and ${\displaystyle q}$ are absolutely continuous with respect to some reference measure ${\displaystyle r}$ (usually ${\displaystyle r}$ is a Lebesgue measure on a Borel σ-algebra). Let ${\displaystyle P}$ and ${\displaystyle Q}$ be probability density functions of ${\displaystyle p}$ and ${\displaystyle q}$ with respect to ${\displaystyle r}$. Then

${\displaystyle -\int _{\mathcal {X}}P(x)\,\log Q(x)\,dr(x)=\operatorname {E} _{p}[-\log Q]}$

and therefore

${\displaystyle H(p,q)=-\int _{\mathcal {X}}P(x)\,\log Q(x)\,dr(x)}$

(Eq.2)

NB: The notation ${\displaystyle H(p,q)}$ is also used for a different concept, the joint entropy of ${\displaystyle p}$ and ${\displaystyle q}$.

Motivation

In information theory, the Kraft–McMillan theorem establishes that any directly decodable coding scheme for coding a message to identify one value ${\displaystyle x_{i}}$ out of a set of possibilities ${\displaystyle \{x_{1},...,x_{n}\}}$ can be seen as representing an implicit probability distribution ${\displaystyle q(x_{i})=\left({\frac {1}{2}}\right)^{l_{i}}}$ over ${\displaystyle \{x_{1},...,x_{n}\}}$, where ${\displaystyle l_{i}}$ is the length of the code for ${\displaystyle x_{i}}$ in bits. Therefore, cross entropy can be interpreted as the expected message-length per datum when a wrong distribution ${\displaystyle q}$ is assumed while the data actually follows a distribution ${\displaystyle p}$. That is why the expectation is taken over the true probability distribution ${\displaystyle p}$ and not ${\displaystyle q}$. Indeed the expected message-length under the true distribution ${\displaystyle p}$ is,

${\displaystyle \operatorname {E} _{p}[l]=-\operatorname {E} _{p}\left[{\frac {\ln {q(x)}}{\ln(2)}}\right]=-\operatorname {E} _{p}\left[\log _{2}{q(x)}\right]=-\sum _{x_{i}}p(x_{i})\,\log _{2}{q(x_{i})}=-\sum _{x}p(x)\,\log _{2}q(x)=H(p,q)}$

Estimation

There are many situations where cross-entropy needs to be measured but the distribution of ${\displaystyle p}$ is unknown. An example is language modeling, where a model is created based on a training set ${\displaystyle T}$, and then its cross-entropy is measured on a test set to assess how accurate the model is in predicting the test data. In this example, ${\displaystyle p}$ is the true distribution of words in any corpus, and ${\displaystyle q}$ is the distribution of words as predicted by the model. Since the true distribution is unknown, cross-entropy cannot be directly calculated. In these cases, an estimate of cross-entropy is calculated using the following formula:

${\displaystyle H(T,q)=-\sum _{i=1}^{N}{\frac {1}{N}}\log _{2}q(x_{i})}$

where ${\displaystyle N}$ is the size of the test set, and ${\displaystyle q(x)}$ is the probability of event ${\displaystyle x}$ estimated from the training set. The sum is calculated over ${\displaystyle N}$. This is a Monte Carlo estimate of the true cross entropy, where the test set is treated as samples from ${\displaystyle p(x)}$.

Relation to log-likelihood

In classification problems we want to estimate the probability of different outcomes. If the estimated probability of outcome ${\displaystyle i}$ is ${\displaystyle q_{i}}$, while the frequency (empirical probability) of outcome ${\displaystyle i}$ in the training set is ${\displaystyle p_{i}}$, and there are N conditionally independent samples in the training set, then the likelihood of the training set is

${\displaystyle \prod _{i}({\mbox{probability of }}i)^{{\mbox{number of occurrences of }}i}=\prod _{i}q_{i}^{Np_{i}}}$

so the log-likelihood, divided by ${\displaystyle N}$ is

${\displaystyle {\frac {1}{N}}\log \prod _{i}q_{i}^{Np_{i}}=\sum _{i}p_{i}\log q_{i}=-H(p,q)}$

so that maximizing the likelihood is the same as minimizing the cross entropy.

Cross-entropy minimization

Main article: cross-entropy method

Cross-entropy minimization is frequently used in optimization and rare-event probability estimation. When comparing a distribution ${\displaystyle q}$ against a fixed reference distribution ${\displaystyle p}$, cross entropy and KL divergence are identical up to an additive constant (since ${\displaystyle p}$ is fixed): both take on their minimal values when ${\displaystyle p=q}$, which is ${\displaystyle 0}$ for KL divergence, and ${\displaystyle \mathrm {H} (p)}$ for cross entropy.[1] In the engineering literature, the principle of minimising KL Divergence (Kullback's "Principle of Minimum Discrimination Information") is often called the Principle of Minimum Cross-Entropy (MCE), or Minxent.

However, as discussed in the article Kullback–Leibler divergence, sometimes the distribution ${\displaystyle q}$ is the fixed prior reference distribution, and the distribution ${\displaystyle p}$ is optimised to be as close to ${\displaystyle q}$ as possible, subject to some constraint. In this case the two minimisations are not equivalent. This has led to some ambiguity in the literature, with some authors attempting to resolve the inconsistency by redefining cross-entropy to be ${\displaystyle D_{\mathrm {KL} }(p\|q)}$, rather than ${\displaystyle H(p,q)}$.

Cross-entropy loss function and logistic regression

Cross entropy can be used to define a loss function in machine learning and optimization. The true probability ${\displaystyle p_{i}}$ is the true label, and the given distribution ${\displaystyle q_{i}}$ is the predicted value of the current model.

More specifically, consider logistic regression, which (among other things) can be used to classify observations into two possible classes (often simply labelled ${\displaystyle 0}$ and ${\displaystyle 1}$). The output of the model for a given observation, given a vector of input features ${\displaystyle x}$, can be interpreted as a probability, which serves as the basis for classifying the observation. The probability is modeled using the logistic function ${\displaystyle g(z)=1/(1+e^{-z})}$ where ${\displaystyle z}$ is some function of the input vector ${\displaystyle x}$, commonly just a linear function. The probability of the output ${\displaystyle y=1}$ is given by

${\displaystyle q_{y=1}\ =\ {\hat {y}}\ \equiv \ g(\mathbf {w} \cdot \mathbf {x} )\ =1/(1+e^{-\mathbf {w} \cdot \mathbf {x} }),}$

where the vector of weights ${\displaystyle \mathbf {w} }$ is optimized through some appropriate algorithm such as gradient descent. Similarly, the complementary probability of finding the output ${\displaystyle y=0}$ is simply given by

${\displaystyle q_{y=0}\ =\ 1-{\hat {y}}}$

Having set up our notation, ${\displaystyle p\in \{y,1-y\}}$ and ${\displaystyle q\in \{{\hat {y}},1-{\hat {y}}\}}$, we can use cross entropy to get a measure of dissimilarity between ${\displaystyle p}$ and ${\displaystyle q}$:

${\displaystyle H(p,q)\ =\ -\sum _{i}p_{i}\log q_{i}\ =\ -y\log {\hat {y}}-(1-y)\log(1-{\hat {y}})}$

Logistic regression typically optimizes the log loss for all the observations on which it is trained, which is the same as optimizing the average cross-entropy in the sample. For example, suppose we have ${\displaystyle N}$ samples with each sample indexed by ${\displaystyle n=1,\dots ,N}$. The average of the loss function is then given by:

${\displaystyle {\begin{aligned}J(\mathbf {w} )\ &=\ {\frac {1}{N}}\sum _{n=1}^{N}H(p_{n},q_{n})\ =\ -{\frac {1}{N}}\sum _{n=1}^{N}\ {\bigg [}y_{n}\log {\hat {y}}_{n}+(1-y_{n})\log(1-{\hat {y}}_{n}){\bigg ]}\,,\end{aligned}}}$

where ${\displaystyle {\hat {y}}_{n}\equiv g(\mathbf {w} \cdot \mathbf {x} _{n})=1/(1+e^{-\mathbf {w} \cdot \mathbf {x} _{n}})}$, with ${\displaystyle g(z)}$ the logistic function as before.

The logistic loss is sometimes called cross-entropy loss. It is also known as log loss (In this case, the binary label is often denoted by {-1,+1}).[2]

See also

• Cross-entropy method
• Logistic regression
• Conditional entropy
• Maximum likelihood estimation
• Mutual information

References

1. Ian Goodfellow, Yoshua Bengio, and Aaron Courville (2016). Deep Learning. MIT Press. Online
2. Murphy, Kevin (2012). Machine Learning: A Probabilistic Perspective. MIT. ISBN 978-0262018029.

External links

• What is cross-entropy, and why use it?
• Cross Entropy