Landsat 6

Landsat 6, equipped with upgraded versions of the instruments on Landsat 5, was designed to carry forward the Landsat program. It was launched on October 5, 1993 with a Titan II launch vehicle, but failed to reach orbit.[2] Landsat 6 omitted the Multi-Spectral Scanner found on its predecessors, but carried an Enhanced Thematic Mapper, which improved on the previous Thematic Mapper by adding a 15m-resolution panchromatic band.[3]

Landsat 6
Mission typeEarth imaging
OperatorNASA / NOAA
COSPAR ID1993-F04[1]
Mission durationFailed to orbit
Spacecraft properties
ManufacturerMartin Marietta
Launch mass2,750 kilograms (6,060 lb)
Power1259 watts
Start of mission
Launch dateOctober 5, 1993 (1993-10-05)
RocketTitan II(23)G/Star-37XFP-ISS
Launch siteVandenberg AFB SLC-4W
Orbital parameters
Reference systemGeocentric
RegimeSun-synchronous
Perigee altitude705 kilometres (438 mi)
Apogee altitude705 kilometres (438 mi)
Inclination98.3°
Period98.9 minutes
EpochPlanned
 

Development

The Landsat 6 satellite was built by Martin Marietta Astro Space.[4]

Design

Operations

The satellite was constructed from aluminum and used graphite struts. Landsat 6 had a hydrazine propulsion system. The spacecraft was powered by one solar array that had single-axis articulation and produced 1430 W. The power was stored in two NiCd batteries that had a capacity of 100 Ah. Data collected from the sensors was stored on tapes and transmitted to ground stations at 85 Mbit/s. The satellite was stabilized to 0.1 degrees in all three axes by using reaction wheels.[4]

Sensors

The Enhanced Thematic Mapper was designed and manufactured by Santa Barbara Research Center.[2]

Mission

Launch

Landsat 6 was launched aboard a Titan II launch vehicle from Vandenberg Air Force Base on October 5, 1993.[2]

Operations

Even though Landsat 6 separated from the rocket at the appropriate time and place, the satellite failed to reach orbit. Since fuel could not reach the reaction engines, the satellite could not maintain attitude control during the apogee kick motor (AKM) burn. This caused the satellite to tumble during the burn, resulting in a failure to orbit due to the wasted energy.[2]

Martin Marietta and NOAA both convened review boards to investigate the failure. Both boards determined that Landsat 6 did not achieve orbit due to a ruptured hydrazine manifold, and recommended a task force investigate hydrazine feed systems that were more reliable.[2]

gollark: There's a nim→JS compiler.
gollark: It supports that.
gollark: I mean, I could write nim on the frontend too I guess?
gollark: I'll probably do it if I can work out how to append after things in J§.
gollark: It actually would simplify the CSS somewhat, too.

References
  1. "Landsat 6, 7". Gunter's Space Page. Retrieved March 20, 2020.
  2. "Landsat 6 failure attributed to ruptured manifold" (PDF) (Press release). NOAA. March 10, 1995.
  3. "Landsat 6". USGS. Archived from the original on August 27, 2013. Retrieved July 17, 2017.
  4. "Landsat-6". eoPortal Directory. Retrieved July 17, 2017.


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.