Intel Hub Architecture

Intel Hub Architecture (IHA) was Intel's architecture for the 8xx family of chipsets, starting c. 1999 with the Intel 810. It uses a memory controller hub (MCH) that is connected to an I/O controller hub (ICH) via a 266 MB/s bus. The MCH chip supports memory and AGP, while the ICH chip provides connectivity for PCI, USB, sound, IDE hard disks and LAN.

Intel claimed that, because of the high-speed channel between the sections, the IHA was faster than the earlier northbridge/southbridge design, which hooked all low-speed ports to the PCI bus. The IHA also optimized data transfer based on data type.

Next generation

Intel Hub Interface 2.0 was employed in Intel's line of E7xxx server chipsets. This new revision allowed for dedicated data paths for transferring greater than 1.0 GB/s of data to and from the MCH, which support I/O segments with greater reliability and faster access to high-speed networks.

Current status

IHA is now considered obsolete and no longer used, being superseded by the Platform Controller Hub introduced with the Intel 5 Series chipset in 2008.

gollark: Well, yes.
gollark: It does seem like terrorists are weirdly ineffective. If I wanted to destabilize Western civilization I expect I could do a better job.(Hi government agents!)
gollark: Well, terrorists do, presumably. For terror.
gollark: I use Syncthing for my personal sync needs personally. It does that but P2Pishly without requiring cloud™ somewhere.
gollark: Seriously? That seems vaguely implausible. The Pi's SoC may be newer than... Core 2 Duos or something, but the A72 cores in it are *not* particularly new and as far as I know quite bad.


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.