Icaro Cyber
The Icaro Cyber is an Italian single-place, paraglider that was designed and produced by Icaro 2000 of Sangiano. It is now out of production.[1]
| Cyber | |
|---|---|
| Role | Paraglider |
| National origin | Italy |
| Manufacturer | Icaro 2000 |
| Designer | Michael Nessler and Christian Amon |
| Introduction | 2001 |
| Status | Production completed |
| Unit cost |
€2,216 (2004) |
The Cyber 2 was designed by Michael Nessler and Christian Amon.[1]
Design and development
The Cyber was designed as a beginner glider.[1]
The design progressed through two generations of models, the Cyber and Cyber 2. The models are each named for their relative size.[1]
Variants
- Cyber S
- Small-sized model for lighter pilots, introduced in 2001. The glider model is DHV 1 certified.[1]
- Cyber M
- Mid-sized model for medium-weight pilots, introduced in 2001. The glider model is DHV 1 certified.[1]
- Cyber L
- Large-sized model for heavier pilots, introduced in 2001. The glider model is DHV 1 certified.[1]
- Cyber 2 S
- Small-sized model for lighter pilots. Its 11.6 m (38.1 ft) span wing has a wing area of 25.5 m2 (274 sq ft), 40 cells and the aspect ratio is 5.3:1. The pilot weight range is 65 to 85 kg (143 to 187 lb). The glider model is DHV 1 certified.[1]
- Cyber 2 M
- Mid-sized model for medium-weight pilots. Its 12.2 m (40.0 ft) span wing has a wing area of 28.3 m2 (305 sq ft), 40 cells and the aspect ratio is 5.3:1. The pilot weight range is 80 to 105 kg (176 to 231 lb). The glider model is DHV 1 certified.[1]
- Cyber 2 L
- Large-sized model for heavier pilots. Its 12.8 m (42.0 ft) span wing has a wing area of 31.2 m2 (336 sq ft), 40 cells and the aspect ratio is 5.3:1. The pilot weight range is 100 to 125 kg (220 to 276 lb). The glider model is DHV 1 certified.[1]
Specifications (Cyber 2 M)
Data from Bertrand[1]
General characteristics
- Crew: one
- Wingspan: 12.2 m (40 ft 0 in)
- Wing area: 28.3 m2 (305 sq ft)
- Aspect ratio: 5.3:1
gollark: (because people never strip the debug symbols)
gollark: (although that decompiles pretty easily)
gollark: I had to deal with BYTECODE before, you know.
gollark: Technically they're combination arrays/maps so they can start at other stuff, but table literal syntax and the builtins assume 1.
gollark: No, Lua tables do start at 1.
References
- Bertrand, Noel; Rene Coulon; et al: World Directory of Leisure Aviation 2003-04, page 19. Pagefast Ltd, Lancaster OK, 2003. ISSN 1368-485X
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.