IBM Monochrome Display Adapter

Monochrome Display Adapter
	IBM Monochrome Display and [parallel] Printer Adapter (MDA)
Release date	1981
Architecture	Motorola 6845
Cards
Entry-level	IBM MDA, Control Systems Artist 1, Hitachi HD6845SP, UMC UM6845
History
Successor	Hercules Graphics Card, Enhanced Graphics Adapter

The Monochrome Display Adapter (MDA, also MDA card, Monochrome Display and Printer Adapter, MDPA) is IBM's standard video display card and computer display standard for the PC introduced in 1981. The MDA does not have any pixel-addressable graphics modes, only a single monochrome text mode which can display 80 columns by 25 lines of high resolution text characters or symbols useful for drawing forms.

Hardware Design

The original IBM MDA was an 8-bit ISA card with a Motorola 6845 display controller, 4 kB of RAM, a DE-9 output port intended for use with an IBM monochrome monitor, and a parallel port for attachment of a printer, avoiding the need to purchase a separate card.[1]

Capabilities

IBM 5151 monitor driven by a Monochrome Display Adapter

The MDA was based on the IBM Datamaster's display system,[2] and was intended to support business and wordprocessing use with it's sharp, high-resolution characters. Each character is rendered in a box of 9×14 pixels, of which 7×11 depicts the character itself and the other pixels provide space between character columns and lines. Some characters, such as the lowercase "m", are rendered eight pixels across.[3]

Characters of code page 437

The theoretical total screen display resolution of the MDA is 720×350 pixels, if the dimensions of all character cells are added up, but the MDA cannot address individual pixels to take full advantage of this resolution. Each character cell can be set to one of 256 bitmap characters stored in ROM on the card, and this character set cannot be altered from the built-in hardware code page 437. The only way to simulate "graphics" is through ASCII art.

Code page 437 has 256 characters (0-255), including the standard 95 printable ASCII characters from (32-126), and the 33 ASCII control codes (0-31 and 127) are replaced with printable graphic symbols. It also includes another 128 characters (128-255) like the aforementioned characters for drawing forms. Some of these shapes appear in Unicode as box-drawing characters.

There are several attribute values - bit flags that can be set on each character on the screen. These are invisible, underline, normal, bright (bold), reverse video, and blinking. Reverse video swaps the foreground and background colors, while blinking causes text to flash periodically. Some of these attributes can be combined, so that e.g. bright, underlined text can be rendered.[1]

Early versions of the MDA board have hardware capable of outputting red, green and blue TTL signals on the normally unconnected video connector pins, theoretically allowing an 8-color display with a suitable monitor. The registers also allow the monochrome mode to be set on and off. No (widely) published software exists to actually control the feature.[4][1][5]

Use

The MDA was released alongside the IBM Color Graphics Adapter, and in fact could be installed alongside the CGA in the same computer. A command included with PC-DOS permitted switching the primary display between the CGA and MDA cards.[6]

Because of the lack of pixel-addressable graphics, MDA owners were unable to play PC games released with graphics support. However, textmode games were released for the PC (including text adventures) and at least one game, IBM's One Hundred And One Monochrome Mazes, requires MDA.[7] Box-drawing characters made the production of rudimentary graphics practical for early PC game titles, including BBS door games or titles such as Castle Adventure

Another use for the MDA was as a secondary display for debugging. Applications like SoftICE[8] and the Windows debugger[9] permitted the simultaneous use of an MDA and another graphics card, with the MDA displaying a debugger interface while the other card was showing the primary display.

Reception

MDA was more popular than the IBM Color Graphics Adapter for business applications. The higher resolution of MDA's text and inclusion of a printer port made it more appealing for the business applications that were the focus of the original PC. However, dissatisfaction with its limitations quickly led to third parties releasing competing hardware.[10]

A well known example was the Hercules Graphics Card. Introduced in 1982, it offered both an MDA-compatible high resolution text mode and a monochrome graphics mode. It could address individual pixels, and displayed a black and white picture of 720×348 pixels. This resolution was superior to the CGA card, yet offered pixel-addressable graphics, so despite lacking color capability, the Hercules adapter's offer of high resolution bitmap graphics combined with MDA-grade text quality made it a popular choice, which was even shipped with many clones.[11]

Specifications

Connector

DE-9 connector, looking at back of PC

Pin assignments[12]
Pin	Function
1	Ground
2	Ground
3	Not Used
4	Not Used
5	Not Used
6	Intensity
7	Video
8	Horizontal Sync (+)
9	Vertical Sync (-)

Signal

Type	Digital, TTL
Resolution	720h × 350v
H-freq	18.432 kHz
V-freq	50 Hz
Colors	1
Color Intensity	2-4[13]

Clone boards

MDA Video card with Hitachi HD6845 (= Motorola MC6845).

Other boards offer MDA compatibility, although with differences on how attributes are displayed or the font used.[1][14]

3270 PC
Amstrad PPC / PC20
Control Systems Artist 1
Tamarack Microelectronics TD3088A3

gollark: ++search !wen Switzerland

gollark: ++!wen Switzerland