Halsey Street station (BMT Canarsie Line)

Halsey Street is a station on the BMT Canarsie Line of the New York City Subway. Located on the border of Ridgewood, Queens, and Bushwick, Brooklyn, at the intersection of Halsey Street and Wyckoff Avenue, it is served by the L train at all times.

 Halsey Street
 
New York City Subway station (rapid transit)
Eastbound street stair
Station statistics
AddressHalsey Street & Wyckoff Avenue
Queens, NY 11385
Brooklyn, NY 11237
BoroughOn the border of Queens and Brooklyn (mostly in Queens)
LocaleRidgewood, Queens and Bushwick, Brooklyn
Coordinates40.696095°N 73.905029°W / 40.696095; -73.905029
DivisionB (BMT)
Line      BMT Canarsie Line
Services      L  (all times)
Transit connections NYCT Bus: B26
StructureUnderground
Platforms2 side platforms
Tracks2
Other information
OpenedJuly 14, 1928 (1928-07-14)
Station code129[1]
Wireless service[2]
Opposite-direction transfer availableNo
Traffic
Passengers (2019)2,176,141[3] 17.1%
Rank215 out of 424[3]
Station succession
Next northMyrtle–Wyckoff Avenues: L 
Next southWilson Avenue: L 

History

Track layout
to Myrtle–Wyckoff
to Wilson Av

Halsey Street opened on July 14, 1928,[4] as part of an extension of the Canarsie Line. This extension connected Montrose Avenue, which had opened four years earlier, to Broadway Junction, which was the western end of the already-operating elevated line to Canarsie.

Station layout

G Street level Exit/entrance
P
Platform level
Side platform
Westbound toward Eighth Avenue (Myrtle–Wyckoff Avenues)
Eastbound toward Rockaway Parkway (Wilson Avenue)
Side platform
Southbound platform mosaic

This station has two tracks and two side platforms. Since all intersections on this section of Wyckoff Avenue are T intersections, the platforms are offset, with the Manhattan-bound platform built about 60 feet (18 m) further to the east than the Canarsie-bound one.[5] Also, since the Brooklyn-Queens border travels on Wyckoff Avenue for part of the length of this station before turning south, the entire Manhattan-bound platform, as well as the eastern half of the Canarsie-bound platform, is located in Queens.

Both platforms have their original mosaic tile band that is colored blue and green with yellowish accents.[5] "H" tablets on blue background run along the tile bands at regular intervals.[5] The name tablets read "HALSEY ST." in gold serif font on a blue background and a green, yellow, and blue border.[5] There are also directional signs in gold serif font and outline on a blue background.[5] One of the platforms formerly had two bathrooms. Yellow i-beam columns run along both platforms at regular intervals with alternating ones having the standard black station name plate in white lettering.[5]

Exits

All fare control areas at this station are platform level and there are no crossovers or crossunders. The full-time side is at the west (railroad north) end of the platforms. On the Manhattan-bound side, a turnstile bank leads to the full-time token booth and one staircase going up to the northwest corner of Wyckoff Avenue and George Street. On the Canarsie-bound side, a turnstile bank leads to a part-time customer assistance booth and one staircase going up to the southwest corner of Halsey Street and Wyckoff Avenue.[6]

Both platforms have an unstaffed fare control area at their east (railroad south) end. A set of full height turnstiles leads to a single street stair. The Manhattan-bound staircase goes up to the northeast corner of Norman Street and Wyckoff Avenue while the Canarsie-bound staircase goes up to the southwest corner of Covert Street and Wyckoff Avenue.[6]

gollark: Alternatively, make a Haskell to C++ template compiler.
gollark: C++ bad?
gollark: Don't?
gollark: Solution: ... hijack the builtin number class somehow?
gollark: Sadly, you can only do it to numbers below 256.

References

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.