HMS Hydra (1871)

HMS Hydra was the second ship completed of the four Cyclops-class breastwork monitors built for the Royal Navy during the 1870s. The ships were ordered to satisfy demands for local defence during the war scare of 1870, but the pace of construction slowed tremendously as the perceived threat of war declined. The ship spent most of her career in reserve; her only sustained period in commission was four months during the Russo-Turkish War in 1878 when the British were trying to force the Russians to end the war without seizing Constantinople. Hydra was sold for scrap in 1903.

For other ships with the same name, see HMS Hydra.

Right elevation plan from Brassey's Naval Annual 1888–1889
History
United Kingdom
Name: HMS Hydra
Namesake: Hydra
Builder: Robert Napier and Sons, Govan
Cost: £194,334
Laid down: 28 December 1870
Launched: 18 July 1871
Completed: 31 May 1877
Commissioned: August 1872
Out of service: 1901
Refit: 1888–89
Fate: Sold for scrap 7 July 1903
General characteristics
Class and type: Cyclops-class breastwork monitor
Displacement: 3,480 long tons (3,540 t)
Length: 225 ft (68.6 m) (p/p)
Beam: 45 ft (13.7 m)
Draught: 16 ft 3 in (5.0 m) (deep load)
Installed power: 1,528 ihp (1,139 kW)
Propulsion: 2 shafts, 2 steam engines
Speed: 11 knots (20 km/h; 13 mph)
Range: 3,000 nmi (5,600 km; 3,500 mi) at 10 kn (19 km/h; 12 mph)
Complement: 156
Armament: 2 × 2 - 10-inch rifled muzzle loaders
Armour:

Design and description

The ships had a length between perpendiculars of 225 feet (68.6 m), a beam of 45 feet (13.7 m), and a draught of 16 feet 3 inches (4.95 m) at deep load. They displaced 3,480 long tons (3,540 t). Their crew consisted of 156 officers and men.[1]

The Cyclops-class ships and other ships of her type were described by Admiral George Alexander Ballard as being like "full-armoured knights riding on donkeys, easy to avoid but bad to close with."[2] While not unfit to face heavy weather their decks were frequently awash in even a moderate sea. Their accommodations were rated the worst in the fleet, referred to by ordinary seamen as "ratholes with tinned air".[3]

Propulsion

Hydra had two 4-cylinder inverted compound steam engines made by John Elder, each driving a single 12-foot (3.7 m) propeller. The ship's boilers had a working pressure of 60 psi (414 kPa; 4 kgf/cm2). The engines produced a total of 1,472 indicated horsepower (1,098 kW) on 4 July 1872 during the ship's sea trials which gave her a maximum speed of 11.2 knots (20.7 km/h; 12.9 mph). Hydra carried 250 long tons (250 t) of coal,[4] enough to steam 3,000 nmi (5,600 km; 3,500 mi) at 10 kn (19 km/h; 12 mph).[5]

Armament

The ships mounted a pair of 10-inch rifled muzzle-loading guns in each turret. The shell of the 10-inch (254 mm) gun weighed 407 pounds (184.6 kg) while the gun itself weighed 18 long tons (18 t). The gun had a muzzle velocity of 1,365 ft/s (416 m/s) and was credited with the ability to penetrate a nominal 12.9 inches (330 mm) of wrought iron armour at 100 yards (91 m). The guns could fire both solid shot and explosive shells.[6] They were mounted on carriages that used hydraulic jacks to elevate and depress the guns.[7]

Armour

The Cyclops-class ships had a complete waterline belt of wrought iron that was 8 inches (203 mm) thick amidships and thinned to 6 inches (152 mm) at the ends. The superstructure and conning tower was fully armoured, the reason it was called a breastwork, with 8–9 inches (203–229 mm) of wrought iron. The gun turrets had 10 inches on their faces and 9 inches on the sides and rear. All of the vertical armour was backed by 9–11 inches (229–279 mm) of teak. The decks were 1.5 inches (38.1 mm) thick.[8]

Construction

HMS Hydra was laid down on 5 September 1870 by the Robert Napier and Sons in Govan. She was launched on 28 December 1871 and commissioned in August 1872. The ship was towed to Devonport that same month for what proved to be a very lengthy fitting out period that was not completed on 31 May 1876.[9] Cyclops cost £194,334 to build.[1][Note 1]

Refit

Although a recommendation had been made while the ships were still under construction to extend the superstructure out to the sides of the ship to improve their stability and habitability, this was not acted upon until they were refitted during the 1880s. This refit also strengthened the breastwork and upper decks, added another watertight bulkhead as well as a false keel. Four quick-firing 3-pounder Hotchkiss guns were added on the breastwork for torpedo boat defence as well as five machine guns and several searchlights.[10] This increased their crew to approximately 191 men[1] and added 80 long tons (81 t) to their displacement.[11]

Service

HMS Hydra was the second ship to be completed, although she was the last ship of the class launched. She was placed in 1st Reserve after her completion. The ship, along with her sisters, was commissioned between April and August 1878 during the Russo-Turkish War for service with Admiral Sir Cooper Key's Particular Service Squadron in Portland Harbour. Hydra was paid off at Sheerness in August 1878 and served as tender to HMS Duncan. The ship was refitted in 1888–89 and was in Fleet Reserve at Chatham until 1901. All four ships of the class participated in the annual fleet manoeuvers in 1887, 1889–90 and 1892. HMS Hydra, like all of her sisters, was placed on the non-effective list in 1901[9] and sold on 7 July 1903[12] for £8,400.[9][Note 2]

Notes
  1. Adjusted for inflation, the ship cost 21,769,285 in current pounds.
  2. Adjusted for inflation, the ship sold for 908,656 in current pounds.

Footnotes
  1. Parkes, p. 213
  2. Ballard, p. 219
  3. Ballard, pp. 218
  4. Ballard, pp. 246–49
  5. Silverstone, p. 169
  6. Gardiner, p. 6
  7. Parkes, p. 212
  8. Parkes, pp. 213–14
  9. Parkes, p. 215
  10. Parkes, pp. 212, 214
  11. Gardiner, p. 25
  12. Silverstone, p. 224
gollark: <@709333181983096834> ```haskelldata T = TautocompleteIsAlive :: TautocompleteIsAlive = Tmain = print $ autoCompleteIsAlive```
gollark: Your bot is bad.
gollark: <@709333181983096834> ```haskelldata T = TautocompleteIsAlive :: TautocompleteIsAlive = Tmain = print $ autoCompleteIsAlive```
gollark: Mine is more accurate because it has syntax highlighting.
gollark: ```haskelldata T = TautocompleteIsAlive :: TautocompleteIsAlive = T```

References
  • Ballard, G. A., Admiral (1980). The Black Battlefleet. Annapolis, MD: Naval Institute Press. ISBN 0-87021-924-3.
  • Gardiner, Robert, ed. (1979). Conway's All the World's Fighting Ships 1860-1905. Greenwich: Conway Maritime Press. ISBN 0-8317-0302-4.
  • Parkes, Oscar (1990). British Battleships (reprint of the 1957 ed.). Annapolis, MD: Naval Institute Press. ISBN 1-55750-075-4.
  • Silverstone, Paul H. (1984). Directory of the World's Capital Ships. New York: Hippocrene Books. ISBN 0-88254-979-0.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.