GM Zeta platform

Zeta was the original name for General Motors' full-size rear-wheel drive automobile platform developed by GM's Australian subsidiary company Holden and was most recently referred to as the "Global RWD Architecture". The GM Zeta replaced the V-body, and debuted with 2006 Holden Commodore (VE) sedan and Holden (VE) Ute. This platform was considered as the replacement for the North American W, H, and K platforms until plans were cancelled due to fuel-economy considerations and GM's financial situation. Although the future of the Zeta program was in doubt at that time, in May 2009, Holden began the development of an improved second version of the platform that went on to form the basis of the 2013 Commodore (VF) and Chevrolet SS.[1][2]

Main article: List of GM platforms
GM Zeta platform
Holden Caprice (WM)
Overview
ManufacturerGeneral Motors
Also calledGlobal RWD Architecture
Production2006–2017
Body and chassis
ClassFull-size
Body style(s)2-door coupe
2-door convertible
2-door coupé utility
4-door sedan
5-door Station wagon
Chronology
PredecessorGM B platform ( for the 4th generation Caprice for the police in North America)
GM V platform (RWD)
GM F platform (for the Chevrolet Camaro)
SuccessorGM Alpha platform (for the Chevrolet Camaro)
GM Epsilon platform (for the Holden Commodore and Holden Caprice)
GM Omega platform (RWD) (Full Size)

The 2010-15 fifth generation Chevrolet Camaro was the only Zeta platform model produced in North America. All other Zeta platform vehicles have been manufactured in Australia by Holden. In 2016, the Chevrolet Camaro (sixth generation) debuted on the GM Alpha platform.

Australian manufactured models include the long-wheelbase Holden WM Statesman/Caprice sedan and the high performance range produced by Holden Special Vehicles. On export markets, Holden-based models included the:

In December 2013, Holden announced that it will cease its local production by 2017 and, with it, the production of the GM Zeta platform. Production ended in October 2017.[4]

Development

Development was started in late 1999 by Holden to replace the aging V-body platform underpinning the third generation Commodore that debuted in 1997, after Opel announced that its Omega (on which the Commodore was based) would be discontinued. Principal development on the VE Commodore was completed by July 2004 at a cost approaching A$1 billion and the first testing mules underwent trials later that year. Unlike previous Holden platforms, the platform was designed around the LWB Caprice and Statesman initially and then shortened to create the Commodore. General Motors global corporate headquarters was impressed by the VE design and began studies on using the underlying architecture (internally christened Zeta by GM engineers) for a range of future products on a global scale. After the cancellation of the plan due to the fuel-economy considerations and GM's financial situation, the idea of Zeta as a global rear drive platform was revived with plans for the fifth generation Chevrolet Camaro of 2010.

Features

The Zeta architecture was designed for great flexibility and could accommodate a wide variety of automotive features such as wheelbase length, ride height, windshield rake and roof line. Zeta's suspension system was all wheel independent and utilizes a MacPherson strut coupled with a dual ball joint lower A-arm for the front and a four link independent setup for the rear wheels. The engine was mounted slightly behind the front axle giving improved weight distribution.

Further development

In May 2009, Holden began the re-engineering of the Zeta platform to create a lighter, stronger, better handling and more fuel efficient version.[2] The improved second version of the platform formed the basis of the 2013 Commodore (VF), which also spawned the 2013 Chevrolet SS that GM announced in May 2012 for the US market. This Chevrolet made its debut at the 2013 Daytona Shootout. The Holden VF Commodore, on which the Chevrolet SS is based, went on sale the same day in Australia.[5]

End of production

In December 2013, Holden announced the end, at the Elizabeth plant in South Australia by the end of 2017 and, with it, that of the Zeta platform. Sigma-based vehicles that shared design engineering with Zeta transitioned to the Alpha platform, which used Zeta as its basis. In particular, the new-age Chevrolet Camaro transitioned to the Alpha platform in November 2015, with the launch of the 2016 sixth generation model.

Vehicles

The vehicles that have used the Zeta platform include:

gollark: ```lualocal ws = http.websocket "ws://192.168.1.6"ws.send "Hello computer! Please read/write a specific file!"```
gollark: You shall have to make... a websocket server...
gollark: ... well, obviously, that's not just allowed by default.
gollark: I think how well it would work depends on details of Lua bytecode I know very little about.
gollark: True, true, but we're discussing a hardware implementation of Lua, so sanity is mostly out the window.

References
  • "Camaro tops GM's rwd list; Buick Velite concept, Pontiac GTO and Impala also possibilities". AutoWeek. Retrieved January 16, 2006.
  • "Moving Up? Impala goes back to rwd in '09". AutoWeek. Retrieved November 14, 2006.
  • "GM to Build New Car Based on Zeta Platform". Detroit Free Press (via Automotive Blogs). Retrieved December 10, 2006.
  • "It's official: Pontiac GTO will return!". Leftlanenews.
  1. "Holden cutbacks: Holden cuts design and engineering jobs as GM abandons global RWD projects" (PDF). GoAutoNews Issue 449. 2008-09-03.
  2. http://www.motorauthority.com/holden-engineering-lighter-and-more-fuel-efficient-zeta-platform.html
  3. http://www.motorauthority.com/blog/1036123_aussie-sourced-chevrolet-caprice-police-car-coming-in-2011
  4. "Holden's last Australian-built model confirmed". Retrieved 11 July 2019.
  5. http://www.autoblog.com/2009/11/16/rumormill-holden-based-rwd-2012-chevy-ss-coming-after-all/
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.