Fieseler Fi 166
In the early 1940s, Erich Bachem, Fieseler's Aircraft's technical manager, developed two designs for a rocket-launched fighter that could reach high altitudes quicker than conventional fighters.[1]
Fi 166 | |
---|---|
Role | Vertical-launched jet fighter |
Manufacturer | Fieseler |
Designer | Erich Bachem |
Status | Project only |
Number built | None |
Design One
Design one involved a straight-winged jet fighter powered by two Jumo 004 jet engines. It would be launched upright by liquid-fuel rockets. After attaining an altitude of 3660 meters, the rocket would burn out, disconnect and return to earth via parachute for re-use. The fighter would then engage Allied bombers before landing as a conventional airplane.[2]
Data
Category | Known Data |
---|---|
Maximum speed | 800 km/h |
Takeoff weight | 5 metric ton |
Flying time | 45 minutes |
gollark: This is very bad at sustained writes, but 25% cheaper to make.
gollark: Of course, a thing to fear is that most modern consumery disks (including that Barracuda, and WD Blues) use shingled magnetic recording.
gollark: Western Digital. They make HDDs.
gollark: Have you seen entry #2 of the CG7 competition?
gollark: Just make Codex do it.
See also
- Bachem Ba 349 Natter, a similar point-defense interceptor designed by Erich Bachem which achieved test flights (1945)
References
- "Fi-166 High-Altitude Rocket Fighter". discaircraft.greyfalcon.us. Retrieved 19 April 2018.
- "Fieseler Fi 166". www.secretprojects.co.uk. Archived from the original on 22 February 2014. Retrieved 19 April 2018.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.