Diamond Creek railway station

Diamond Creek railway station is located on the Hurstbridge line, in Victoria, Australia. It serves the north-eastern Melbourne suburb of Diamond Creek, and opened on 25 June 1912.[1]

Diamond Creek
Northbound view from platform 2 in August 2014
LocationHurstbridge Road, Diamond Creek
Australia
Coordinates37°40′24″S 145°09′31″E
Owned byVicTrack
Operated byMetro
Line(s)Hurstbridge
Distance32.63 kilometres from Southern Cross
Platforms2 side
Tracks2
ConnectionsBus
Construction
Structure typeGround
Parking70
Bicycle facilitiesYes
Disabled accessYes
Other information
StatusUnstaffed station
Station codeDCK
Fare zoneMyki zone 2
WebsitePublic Transport Victoria
History
Opened25 June 1912
ElectrifiedYes
Services
Preceding station   Metro Trains   Following station
Hurstbridge line
Wattleglen
towards Hurstbridge

A passing loop had been present at the station for many years (believed to have been originally used as a goods siding). In 1994, a second platform was constructed on the passing loop. Before then, one train had to set back after using the platform, then enter the loop to allow another train to pass. Both platforms are bi-directional. With the introduction of electronic signalling in 2008, Platform 2 could only be used by Hurstbridge bound trains, but in 2013 Platform 2 received a signal pointing citybound.

Diamond Creek was one of the last stations in Melbourne controlled by the Staff and Ticket safeworking system, including semaphore signals. The station was a break for two sections of the safeworking system; Eltham to Diamond Creek, and Diamond Creek to Hurstbridge. As a result, Metro Trains staff were required to operate the safeworking system, including operating the points for the crossing loop. In 2008, the signals and the points were upgraded to be controlled electronically, and in early 2013, the safe working system was converted to Automatic & Track Control (ATC).[2]

The current station building on Platform 1 was damaged by fire in 1979.[3]

Boom barriers were provided at the Hurstbridge Road level crossing, located at the Up end of the station, in 1988.[4]

Platforms & services

Diamond Creek has two side platforms. It is serviced by Metro Trains' Hurstbridge line services.[5]

Platform 1:

Platform 2:

Dysons operates one route to and from Diamond Creek station:

Panorama Coaches operates two routes via Diamond Creek station:

gollark: Actually, the solution is to deploy "apiary forms" immediately.
gollark: No. But you can use either of them as iterators or give people slices.
gollark: Probably not identical, the `Vec` API has an unsafe thing to convert it to raw pointeroids and such.
gollark: I think the APIs are pretty much the same.
gollark: You tell it how much stack space it can use, and if it goes above that it uses the heap.

References
  1. Diamond Creek Vicsig
  2. Hurstbridge Line VICSIG. Retrieved 31 August 2014.
  3. "Works". Newsrail. Australian Railway Historical Society. August 1979. p. 174.
  4. "Works". Newsrail. Australian Railway Historical Society. June 1988. p. 186.
  5. "Hurstbridge Line". Public Transport Victoria.
  6. "381 Mernda Station to Diamond Creek Station". Public Transport Victoria.
  7. "343 Hurstbridge - Greensborough via Diamond Creek Station". Public Transport Victoria.
  8. "580 Diamond Creek - Eltham Station via Ryans Rd". Public Transport Victoria.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.