Cyanuric acid

Cyanuric acid or 1,3,5-triazine-2,4,6-triol is a chemical compound with the formula (CNOH)3. Like many industrially useful chemicals, this triazine has many synonyms. This white, odorless solid finds use as a precursor or a component of bleaches, disinfectants, and herbicides. In 1997, worldwide production was 160 million kilograms.[2]

Cyanuric acid
Ball-and-stick model of the triol tautomer
Cyanuric (triol) tautomer
Ball-and-stick model of the trione tautomer
Isocyanuric (trione) tautomer
Names
Preferred IUPAC name
1,3,5-Triazinane-2,4,6-trione[1]
Other names
1,3,5-Triazine-2,4,6(1H,3H,5H)-trione[1]
1,3,5-Triazinetriol
s-Triazinetriol
s-Triazinetrione
Tricarbimide
Isocyanuric acid
Pseudocyanuric acid
Identifiers
3D model (JSmol)
ChEBI
ChEMBL
ChemSpider
ECHA InfoCard 100.003.290
KEGG
RTECS number
  • XZ1800000
UNII
Properties
C3H3N3O3
Molar mass 129.07 g/mol
Appearance white crystalline powder
Density 1.75 g/cm3
Melting point 320–360 °C (608–680 °F; 593–633 K) decomposes
0.27 g/100 ml (25 °C)
-61.5·10−6 cm3/mol
Hazards
Safety data sheet ICSC 1313
Related compounds
Related triazines
Cyanuric fluoride
Cyanuric chloride
Cyanuric bromide
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Y verify (what is YN ?)
Infobox references

Properties and synthesis

Properties

Cyanuric acid can be viewed as the cyclic trimer of the elusive species cyanic acid, HOCN. The ring can readily interconvert between two structures via keto–enol tautomerism. The triol tautomer, which may have aromatic character,[3] predominates in solution. The hydroxyl (-OH) groups assume phenolic character. Deprotonation with base affords a series of cyanurate salts:

[C(O)NH]3 ⇌ [C(O)NH]2[C(O)N] + H+ (pKa = 6.88)[4]
[C(O)NH]2[C(O)N] ⇌ [C(O)NH][C(O)N]22− + H+ (pKa = 11.40)
[C(O)NH][C(O)N]22− ⇌ [C(O)N]33− + H+ (pKa = 13.5)

Cyanuric acid is noted for its strong interaction with melamine, forming insoluble melamine cyanurate. This interaction locks the cyanuric acid into the tri-keto tautomer.

Synthesis

Cyanuric acid (CYA) was first synthesized by Friedrich Wöhler in 1829 by the thermal decomposition of urea and uric acid.[5] The current industrial route to CYA entails the thermal decomposition of urea, with release of ammonia. The conversion commences at approximately 175 °C:[2]

3 H2N-CO-NH2 → [C(O)NH]3 + 3 NH3

CYA crystallizes from water as the dihydrate.

Cyanuric acid can be produced by hydrolysis of crude or waste melamine followed by crystallization. Acid waste streams from plants producing these materials contain cyanuric acid and on occasion, dissolved amino-substituted triazines, namely, ammeline, ammelide, and melamine. In one method, an ammonium sulfate solution is heated to the "boil" and treated with a stoichiometric amount of melamine, by which means the cyanuric acid present precipitates as melamine-cyanuric acid complex. The various waste streams containing cyanuric acid and amino-substituted triazines may be combined for disposal, and during upset conditions undissolved cyanuric acid may be present in the waste streams. [6][7]

Intermediates and impurities

Intermediates in the dehydration include both isocyanic acid, biuret, and triuret:

H2N-CO-NH2 → HNCO + NH3
H2N-CO-NH2 + HNCO → H2N-CO-NH-CO-NH2
H2N-CO-NH-CO-NH2 + HNCO → H2N-CO-NH-CO-NH-CO-NH2

One impurity in the production of CYA is ammelide, especially if the reaction temperature exceeds 190 °C: 3 H2N-CO-NH-CO-NH2 → [C(O)]2(CNH2)(NH)2N + 2 NH3 + H2O The first appearance of ammelamide occurs prior to 225 °C and is suspected also to occur from decomposition of biuret but is produced at a slower rate than that of CYA.

Melamine, [C(NH2)N]3, formation occurs between 325 and 350 °C and only in very small quantities.[8]

Applications

Cyanuric acid is used as a chlorine stabilizer in swimming pools. It binds to free chlorine and releases it slowly, extending the time needed to deplete each dose of sanitizer.

The antineoplastic drug teroxirone, is formed by reacting cyanuric acid with 3 equivalents of epichlorohydrin.[9]

Precursors to chlorinated cyanurates

Cyanuric acid is mainly used as a precursor to N-chlorinated cyanurates, which are used to disinfect water. The dichloro derivative is prepared by direct chlorination:

[C(O)NH]3 + 2 Cl2 + 2 NaOH → [C(O)NCl]2[C(O)NH]

This species is typically converted to its sodium salt, sodium dichloro-s-triazinetrione. Further chlorination gives trichloroisocyanuric acid, [C(O)NCl]3. These N-chloro compounds serve as disinfectants and algicides for swimming pool water.[2] It stabilizes the chlorine in the pool and prevents the chlorine from being quickly consumed by sunlight.

Precursors to crosslinking agents

Because of its trifunctionality, CYA is a precursor to crosslinking agents, especially for polyurethane resins and polyisocyanurate thermoset plastics.

Analysis

Testing for cyanuric acid concentration is commonly done with a turbidometric test, which uses a reagent, melamine, to precipitate the cyanuric acid. The relative turbidity of the reacted sample quantifies the CYA concentration. Referenced in 1957.[10] This test works because melamine combines with the cyanuric acid in the water to form a fine, insoluble, white precipitate (melamine cyanurate) that causes the water to cloud in proportion to the amount of cyanuric acid in it. More recently, a sensitive method has been developed for analysis of cyanuric acid in urine.[11]

Animal feed

FDA permits a certain amount of cyanuric acid to be present in some non-protein nitrogen (NPN) additives used in animal feed and drinking water.[12] Cyanuric acid has been used as NPN. For example, Archer Daniels Midland manufactures an NPN supplement for cattle, which contains biuret, triuret, cyanuric acid and urea.[13]

2007 pet food recalls

Cyanuric acid is implicated in connection to the 2007 pet food recalls, the contamination and wide recall of many brands of cat and dog foods beginning in March 2007. Research has found evidence that cyanuric acid, a constituent of urine, together with melamine forms poorly soluble crystals which can cause kidney failure (see Analysis section above).

Safety

Cyanuric acid is classified as "essentially nontoxic".[2] The 50% oral median lethal dose (LD50) is 7700 mg/kg in rats.[14]

However, when cyanuric acid is present together with melamine (which by itself is another low-toxicity substance), it will form a insoluble and rather nephrotoxic complex,[15] as evidenced in dogs and cats during the 2007 pet food contamination and in children during the 2008 Chinese milk scandal cases.

Natural occurrence

Impure copper salt of the acid, with the formula Cu(C3N3O3H2)2(NH3)2, is currently the only known isocyanurate mineral, called joanneumite. It was found in a guano deposit in Chile. It is very rare.[16]

gollark: Oh yes, we know about the objects in advance, right.
gollark: Can you even work out where it is in 3D space unambiguously without *two* cameras?
gollark: Ah. Yes. Would we not need much information about the camera and stuff?
gollark: ?
gollark: Ideally for feed the fish and whatever we would know exactly where the robot is and exactly where the target object is in 3D space and have some code work out exactly how to turn and whatever to go there, but hahahahano.

References

  1. Nomenclature of Organic Chemistry : IUPAC Recommendations and Preferred Names 2013 (Blue Book). Cambridge: The Royal Society of Chemistry. 2014. p. 733. doi:10.1039/9781849733069-FP001. ISBN 978-0-85404-182-4.
  2. Klaus Huthmacher, Dieter Most "Cyanuric Acid and Cyanuric Chloride" Ullmann's Encyclopedia of Industrial Chemistry" 2005, Wiley-VCH, Weinheim. doi 10.1002/14356007.a08 191
  3. Pérez-Manríquez, Liliana; Cabrera, Armando; Sansores, Luis Enrique; Salcedo, Roberto (7 September 2010). "Aromaticity in cyanuric acid". Journal of Molecular Modeling. 17 (6): 1311–1315. doi:10.1007/s00894-010-0825-2. PMC 3102184. PMID 20820829.
  4. "Dissociation constants of organic acids and bases" CRC Handbook of Chemistry and physics, Internet Version 2005 (85th ed.)
  5. Wöhler, F. (1829) "Ueber die Zersetzung des Harnstoffs und der Harnsäure durch höhere Temperatur," (On the decomposition of urea and uric acid at higher temperature), Annalen der Physik und Chemie, 2nd series, 15 : 619-630.
  6. "Process for preparing pure cyanuric acid". July 14, 1981. Retrieved 2007-12-10.
  7. "High pressure thermal hydrolysis process to decompose triazines in acid waste streams". March 22, 1977. Retrieved 2007-12-10.
  8. Shaber, Peter M. et al. "Study of the thermal decomposition of urea (pyrolysis) reaction and importance to cyanuric acid production," American Laboratory, August 1999: 13-21 "Archived copy" (PDF). Archived from the original (PDF) on 2007-09-28. Retrieved 2007-05-08.CS1 maint: archived copy as title (link)
  9. M. Budnowski, Angew. Chem., 7, 827 (1968).
  10. "Merck Turbidity Test". Merck. June 6, 2003. Archived from the original on July 1, 2007. Retrieved 2007-05-06. (dead link 8 April 2018)
  11. Panuwet P, Wade EL, Nguyen JV, Montesano MA, Needham LL, Barr DB. Quantification of cyanuric acid residue in human urine using high performance liquid chromatography-tandem mass spectrometry. J Chromatogr B Analyt Technol Biomed Life Sci 2010 878(28):2916-2922.
  12. "21CFR573.220 Feed-grade biuret". U.S. Food and Drug Administration. April 1, 2006. Retrieved 2007-05-06.
  13. "Roughage Buster Plus: ingredients". Archer Daniels Midland. Archived from the original on 2007-02-12. Retrieved 2007-05-06.
  14. U.S. Food and Drug Administration, "Interim Melamine and Analogues Safety/Risk Assessment; Availability", Archived December 16, 2007, at the Wayback Machine Federal Register: May 30, 2007 (Volume 72, Number 103). Accessed 2008-09-27.
  15. "Melamine and Cyanuric Acid Interaction May Play Part in Illness and Death from Recalled Pet Food" Archived May 18, 2007, at the Wayback Machine, American Veterinary Medical Association (AVMA), Press Release, May 1, 2007. Accessed 2008-09-27.
  16. Mindat, http://www.mindat.org/min-42755.html
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.