Cubieboard

Cubieboard is a single-board computer, made in Zhuhai, Guangdong, China. The first short run of prototype boards were sold internationally in September 2012, and the production version started to be sold in October 2012.[1] It can run Android 4 ICS, Ubuntu 12.04 desktop,[2] Fedora 19 ARM Remix[3] desktop, Armbian, Arch Linux ARM,[4] a Debian-based Cubian distribution,[5], FreeBSD[6], or OpenBSD.[7]

Cubieboard 1
First prototype of the Cubieboard
Release dateOctober 2012 (2012-10)
Operating systemAndroid 4 ICS, Ubuntu 12.04 desktop, Fedora 19 ARM Remix desktop, Archlinux ARM, FreeBSD, or OpenBSD.
CPUCortex-A8 @ 1 GHz CPU,
Memory512 MiB (beta) or 1GiB (final) DDR3
Storage4 GB NAND flash built-in, 1x microSD slot,
GraphicsMali-400 MP
Cubieboard 4
Release date10 March 2015 (2015-03-10)
CPU4x Cortex-A15 and 4x Cortex-A7 implementing ARM big.LITTLE
MemoryBuilt-in, 2 GiB.
Storage8 GiB, internal.
GraphicsPowerVR G6230 (Rogue)

It uses the AllWinner A10 SoC, popular on cheap tablets, phones and media PCs. This SoC is used by developers of the lima driver, an open-source driver for the ARM Mali GPU.[8] At the 2013 FOSDEM demo it ran ioquake 3 at 47 fps in 1024×600.[9]

The Cubieboard team managed to run an Apache Hadoop computer cluster using the Lubuntu Linux distribution.[10]

Technical specifications
A Cubieboard cluster running Apache Hadoop

Cubieboard1

The little motherboard utilizes the AllWinner A10 capabilities[11]

  • SoC: AllWinner A10
  • 512 MiB (beta) or 1GiB (final) DDR3
  • 4 GB NAND flash built-in, 1x microSD slot, 1x SATA port.
  • 10/100 Ethernet connector
  • 2x USB Host, 1x USB OTG, 1x CIR.
  • 96 extend pin including I²C, SPI, LVDS
  • Dimensions: 10 cm × 6 cm

Cubieboard2

The second version, sold since June 2013, enhances the board mainly by replacing the Allwinner A10 SoC with an Allwinner A20 which contains 2 ARM Cortex-A7 MPCore CPUs and a dual fragment shader Mali-400 GPU (Mali-400MP2).[12]

This board is used by Fedora to test and develop the Allwinner SoC port of the distribution.[13]

There is also a version available with two microSD card slots.[14]

Cubietruck (Cubieboard3)

The third version has a new and larger PCB layout and features the following hardware:[15]

  • SoC: Allwinner A20
  • 2 GiB DDR3 @ 480 MHz
  • 8 GB NAND flash built-in, 1x microSD slot, 1x SATA 2.0 port (Hard Disk of 2,5").
  • 10/100/1000 RTL8211E Gigabit Ethernet
  • 2x USB Host, 1x USB OTG, 1x CIR.
  • S/PDIF, headphone, VGA and HDMI audio out, mic and line-in via extended pins
  • Wi-Fi and Bluetooth on board with PCB antenna (Broadcom BCM4329/BCM40181)
  • 54 extended pins including I²C, SPI
  • Dimensions: 11 cm × 8 cm

There is no LVDS support any longer. The RTL8211E NIC allows transfer rates up to 630–638 Mbit/s (sending while 5–10% idle) and 850–860 Mbit/s (receiving while 0–2% idle) when simultaneous TCP connections are established (testing was done utilising iperf with three clients against Cubietruck running Lubuntu)

To connect a 3.5" HDD the necessary 12 V power can be delivered by a 3.5 inch HDD addon package which can be used to power the Cubietruck itself as well.[16] Also new is the option to power the Cubietruck from LiPo batteries.

Cubieboard 4

On May 4, 2014 CubieTech announced the Cubieboard 4, the board is also known as CC-A80.[17] It is based on an Allwinner A80 SoC (quad Cortex-A15, quad Cortex-A7 big.LITTLE), thereby replacing the Mali GPU with a PowerVR GPU. The board was officially released on 10 March 2015.[18]

Cubietruck Plus (Cubieboard 5)

The fifth version has the same PCB layout and almost the same features as the CubieTruck.

  • SoC: Allwinner H8
    • CPU: ARM Cortex-A7 @ 2 GHz octa-core
    • GPU: PowerVR SGX544 @ 700 MHz
    • display controller: Toshiba TC358777XBG, supports HDMI 1.4 1080p and DisplayPort, no LVDS support
  • 2 GiB DDR3
  • 8 GB EMMC flash built-in, 1x microSD slot, 1x SATA 2.0 port (Hard Disk of 2,5") via USB bridge.
  • 10/100/1000M RJ45 Gigabit Ethernet
  • 2x USB Host, 1x USB OTG, 1x CIR.
  • S/PDIF, headphone, and HDMI audio out, mic and line-in via 3.5mm jack, and onboard mic.
  • Wi-Fi (dual-radio 2.4 and 5 GHz) and Bluetooth on board with PCB antenna
  • 70 extended pins including I²C, SPI
  • Dimensions: 11 cm × 8 cm
gollark: No, they're not.
gollark: No.
gollark: What You See You Is Yes I Saw What I Get Is Graham.
gollark: * bad
gollark: Anyway:- WYSYISWIGIG editors are bad- Dreamweaver is particularly bad- Animation on websites are bad- Flash is extremely bda

See also

References
  1. "Ready to ship". cubieboard.org. 30 October 2012.
  2. "$49 Cubieboard: AllWinner A10 Open Hardware Development Board". CNX-Software.com.
  3. "Cubie Board". fedoraproject.org/wiki/.
  4. "Cubieboard". archlinuxarm.org.
  5. "Cubian". GitHub.
  6. "FreeBSD on Allwinner (sunxi) systems". freebsd.org.
  7. "OpenBSD/armv7". openbsd.org.
  8. "Lima: An open source graphics driver for ARM Mali GPUs". Archived from the original on 2012-02-07. Retrieved 2014-12-09.
  9. "Old and new limare code, and management overhead…". Archived from the original on 2013-06-25.
  10. "Hadoop(High-availability distributed object-oriented platform)". Cubieboard.org.
  11. "Cubieboard". linux-sunxi.org.
  12. Cubie, Tom (19 June 2013). "cubieboard2 is here". cubieboard.org. Retrieved 2014-12-09.
  13. "Fedora 19 ARM Remix R1 Release With Support for Allwinner A10, A10s, A13 and A20 SoCs". cnx-software.com. 22 July 2013.
  14. "Model". cubieboard.org. Retrieved 2014-12-09.
  15. "Cubietruck". linux-sunxi.org.
  16. "How to support 3.5 inch hdd on cubieboard". cubieboard.org.
  17. "CubieTech Will Promote A80 High-performance Mini PC". cubieboard.org. Retrieved 2014-12-09.
  18. Lee, Ahha (10 March 2015). "CubieBoard4/CC-A80 Released". cubieboard.org. Retrieved 2015-03-15.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.