Colt M1889

The Colt Model 1889 was a revolver produced by the Colt Manufacturing Company in the late 19th century.

Colt Model 1889
TypeDouble-action revolver
Place of originUnited States
Service history
Used byUnited States Navy, occasionally United States Army
WarsBoxer Rebellion
Philippine–American War
Spanish–American War
World War I
Production history
DesignerWilliam Mason and Carl J. Ehbets
Designed1889
ManufacturerColt
Specifications

History

In the mid 19th century, Colt manufactured revolvers for the Army and Navy that were based on a design by William Mason and Carl J. Ehbets. William Mason left Colt in 1882 to work for Winchester, but Ehbets remained at Colt, and continued to refine the design that they had collaborated on. These refinements led to the Model 1889.[1]

Colt was the first manufacturer to produce a revolver with a swing-out cylinder. Smith & Wesson followed seven years later with the Hand Ejector, Model 1896 in .32 S&W Long caliber. This was an improvement over the Colt 1889 design since it used a combined center-pin and ejector rod to lock the cylinder in position. The 1889 did not use a center pin and the cylinder was prone to move out of alignment.[1]

Design features

The Colt Model 1889 was the first double-action revolver with a swing-out cylinder, released by a sliding latch. This design had two advantages over previous designs, since it enabled fast loading but also maintained the strength of a solid frame. The Model 1889 was chambered for the .41 Long Colt, .38 Long Colt and .38 Short Colt cartridges.[1]

The Navy version was blued, and had a six-inch barrel. It was manufactured with hard rubber grips. Civilian versions had either a blue or nickel finish, and had walnut grips. Sometimes it can have ivory grips.[2]

The Model 1889 differed from earlier Colt revolvers since its cylinder rotated counterclockwise instead of clockwise. This seems to have originated with U.S. Navy requirements, but the direction of rotation worked against the cylinder lock and tended to force the cylinder out of alignment with the barrel. This weakness allowed the cylinder to rotate while holstered or even while the shooter was pulling the trigger.[2]

Use

The Model 1889 and variants were adopted by the United States Military and used prior to the introduction of the M1911 pistol. The Model 1889 was also sold commercially as the Colt New Army and Navy. Approximately 31,000 Colt Model 1889 revolvers were produced.[2]

gollark: No, it can, got mixed up with the 3Bnotplus.
gollark: Pretty sure it can do it natively, but you need to turn that option on by updating the firmware and setting an option in some thingy somewhere.
gollark: They can only USB-boot if you configure them to do that... which requires a working OS to poke the firmware or whatever.
gollark: Why does a server have an optical drive in it?
gollark: Of course you need another server. You always need another server.

See also

References
  1. Kinard, Jeff (2004). Pistols: An Illustrated History of Their Impact. ABC-CLIO. p. 163. ISBN 978-1-85109-470-7.
  2. Sapp, Rick (2007). Standard Catalog of Colt Firearms. F+W Media. p. 96. ISBN 978-0-89689-534-8.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.