Cal 35
The Cal 35 is an American sailboat that was designed by C. William Lapworth as a cruiser and first built in 1979.[1][2][3]
Development | |
---|---|
Designer | William Lapworth |
Location | United States |
Year | 1979 |
Builder(s) | Cal Yachts |
Boat | |
Boat weight | 13,000 lb (5,897 kg) |
Draft | 5.00 ft (1.52 m) |
Hull | |
Type | Monohull |
Construction | Fiberglass |
LOA | 35.08 ft (10.69 m) |
LWL | 28.75 ft (8.76 m) |
Beam | 11.00 ft (3.35 m) |
Engine type | Universal 32 hp (24 kW) diesel engine |
Hull appendages | |
Keel/board type | fin keel |
Ballast | 5,200 lb (2,359 kg) |
Rudder(s) | internally-mounted spade-type rudder |
Rig | |
Rig type | Bermuda rig |
I (foretriangle height) | 46.50 ft (14.17 m) |
J (foretriangle base) | 15.00 ft (4.57 m) |
P (mainsail luff) | 40.50 ft (12.34 m) |
E (mainsail foot) | 12.50 ft (3.81 m) |
Sails | |
Sailplan | Masthead sloop |
Mainsail area | 253.13 sq ft (23.517 m2) |
Jib/genoa area | 348.75 sq ft (32.400 m2) |
Total sail area | 601.88 sq ft (55.916 m2) |
Racing | |
PHRF | 136 |
The Cal 35 is sometimes confused with the earlier Cal 35 Cruise series of sailboats.[1]
Production
The design was built by Cal Yachts in the United States, but it is now out of production.[1][3][4]
Design
The Cal 35 is a recreational keelboat, built predominantly of fiberglass sandwich construction, with wood trim. It has a masthead sloop rig with aluminium spars, a raked stem, a reverse transom, an internally mounted spade-type rudder controlled by a wheel and a fixed fin keel. It displaces 13,000 lb (5,897 kg) and carries 5,200 lb (2,359 kg) of ballast.[1][3]
The boat has a draft of 5.00 ft (1.52 m) with the standard keel and 6.00 ft (1.83 m) with the optional deep draft keel.[1]
The boat is fitted with a Universal diesel engine of 32 hp (24 kW) for docking and maneuvering. The fuel tank holds 33 U.S. gallons (120 L; 27 imp gal) and the fresh water tank has a capacity of 90 U.S. gallons (340 L; 75 imp gal).[1]
Ventilation consists of four opening ports in the main cabin, plus two in the bow cabin. There is a dorade vent over the head. There are also four fixed ports in the main cabin, plus fixed, flush-mounted deadlights over the galley and the forward berths.[3]
The mainsail is sheeted to a mainsheet traveler on the cabin roof. The genoa is sheeted to tracks and is controlled with two-speed winches. There are two halyard winches. The mainsail boom has a topping lift and two internal reefs, an internal outhaul and a boom vang with a 4:1 mechanical advantage.[3]
Variants
- Cal 35 Mark I
- This model was introduced in 1979. It has an interior with the head (with a shower) located on the port side at the bottom of the companionway steps. The galley is located aft. Sleeping accommodation is located forward.[1][3]
- Cal 35 Mark II
- This model was introduced in 1981. It has revised interior, with the head located forward on the starboard side, just aft of the bow "V"-berth. The galley is on he port side and includes a three-burner alcohol-fired stove and an oven. An aft double berth on the starboard side was optional.[1][3]
See also
Similar sailboats
References
- McArthur, Bruce (2019). "Cal 35 (1979) sailboat". sailboatdata.com. Archived from the original on 31 December 2019. Retrieved 31 December 2019.
- McArthur, Bruce (2019). "C. William Lapworth". sailboatdata.com. Archived from the original on 30 September 2019. Retrieved 31 December 2019.
- Sherwood, Richard M.: A Field Guide to Sailboats of North America, Second Edition, pages 270-271. Houghton Mifflin Company, 1994. ISBN 0-395-65239-1
- McArthur, Bruce (2019). "Jensen Marine/Cal Boats". sailboatdata.com. Archived from the original on 23 May 2019. Retrieved 31 December 2019.