British Rail Class 155

The British Rail Class 155 is a diesel multiple unit. These DMUs were built by Leyland Bus at Workington (incorporating some Leyland National bus components) between 1987 and 1988 as part of British Rail's replacement of its ageing first-generation diesel fleet. 42 units were originally built, however only 7 remain; the other 35 units were converted to Class 153 railcars.

British Rail Class 155 Super Sprinter
Northern 155343 at Hull Paragon in August 2019
The refurbished interior of a Northern Rail Class 155 DMU
In service	1987 - present
Manufacturer	Leyland Bus
Order no.	31057 (DMSL) 31058 (DMS)[1]
Built at	Leyland Bus, Workington[2]
Family name	Sprinter
Replaced	First generation DMUs
Constructed	1987 - 1988
Entered service	1988[2]
Refurbished	2006 - 2007
Number built	42 trainsets
Number in service	7 trainsets
Formation	2 cars per trainset DMSL+DMS[2]
Diagram	DP248 DP249[1][3]
Fleet numbers	155301-155335 (sets, as built) 52301-52335 (DMSL (A), as built) 57301-57335 (DMSL (B), as built) 155341-155347 (sets, later build) 52341-52347 (DMSL) 57341-57347 (DMS)[4]
Capacity	160 seats (sets)[5] 80S (DMSL) 80S (DMS)[1]
Operator(s)	Current: Northern Trains Former: British Rail Arriva Trains Northern Northern Rail Arriva Rail North
Depot(s)	Neville Hill[1]
Line(s) served	Caldervale Line Harrogate Line Hull to Scarborough Line Hull to York Line
Specifications
Car body construction	Steel[4] underframe. Powder coated steel body and roof with some aluminium non-structural panels.
Car length	23.208 m (76 ft 1 ^3⁄4 in)[3]
Width	2.700 m (8 ft 10 ^1⁄4 in)[3]
Height	3.746 m (12 ft 3 ^1⁄2 in)[3]
Doors	Single leaf sliding plug[4]
Articulated sections	2
Wheelbase	16.000 m (52 ft 5 ^7⁄8 in) (bogie centres) 2.600 m (8 ft 6 ^3⁄8 in) (bogies)[3]
Maximum speed	75 miles per hour (121 km/h)[1]
Weight	77.7 t (76.5 long tons; 85.6 short tons) (total) 39 t (38 long tons; 43 short tons) (DMSL) 38.7 t (38.1 long tons; 42.7 short tons) (DMS)[4]
Prime mover(s)	one per car, Cummins NT855R5[4][1]
Engine type	14-litre turbo-Diesel
Cylinder count	6
Power output	285 hp (213 kW)
Transmission	Voith Hydraulic T211r[4] 2 axles driven per car
Train heating	Warm air, hot water radiators[3]
Bogies	BREL P3-10 (powered) BREL BT38 (trailer)[4]
Braking system(s)	Air/EP[4]
Safety system(s)	AWS[3] TPWS
Coupling system	BSI[6]
Multiple working	Classes 14x, 15x, 17x[4]
Headlight type	Fluorescent[3]
Track gauge	1,435 mm (4 ft 8 ^1⁄2 in) standard gauge
Notes
All cars in sets 155301-155335 converted to Class 153

History and description

WYPTE Class 155 No. 155341 at Castleton East Junction, in the original carmine and cream livery

Northern Rail Class 155 (rear) coupled with two Class 153s arranged in their original formation at Leeds railway station

The Class 155 train is made up of two 23 metre coaches fitted with Cummins NT855R5 285hp engines and Voith transmission.[7][8]

The fleet was part of the "Super Sprinter" build (the other part of which was the Class 156 fleet - though only the latter carried the "Super Sprinter" branding) and was built by Leyland with a similar construction technique to the Pacers, with extensive use of Avdel rivets holding pre-formed panels together in a lightweight body on a welded floor assembly. The large number of windows makes the vehicles look unusually long, although the fact that the vehicles are very long for such a lightly built body has led to a slight sag being apparent in certain coaches.

Introduction was rapid, but teething troubles soon emerged. The units were the first BR DMUs with sliding-plug automatic doors which closed to provide a smooth bodyside rather than sliding back into the bodyshell (the system used with 150s and 151s). These doors did not work properly and there were reports of them opening while the trains were in use.[9] Consequently, the fleet was taken out of use and modified, with the 156s taking over their diagrams.[10]

Following rework the fleet performance improved substantially. An emerging requirement for replacement rural lines stock saw BR decide to convert the Regional Railways fleet into single-cars to replace the elderly 121 and 122 "Bubblecar" units. These single-car sets, introduced 30 years previously, had been threatened with withdrawal and replacement by the Pacer fleet, although the Pacers had proved to be unable to work the sharply-curving steeply-graded branchlines involved. Instead the Pacers were moved to replace a number of Class 150s, the 150s took over certain 156 diagrams, and the 156s took on the 155 services which were not handed over to the new Class 158s. The 155s emerged from the workshops as single car Class 153s, and were put to work augmenting two car units and on the quiet Cornish, Welsh, North-Western, Norfolk and Lincolnshire branch lines. They do not operate North of the Scottish border. However, West Yorkshire Passenger Transport Executive refused to allow the seven units which they owned to be converted, and these were merely modified to operate reliably in original form. The conversion to single car units was notable for not requiring any external doors to be moved, although this has led to the No.2 cab being unusually cramped, despite being extended into the vestibule area.

Surviving units

The previously mentioned seven remaining Class 155 units, which are numbered 155341 to 155347, were built in 1988 for West Yorkshire Passenger Transport Executive (WYPTE) for their MetroTrain services, and remain in service today in their original formation.[7] They are currently operated by Northern Trains. These were previously seen on Manchester Victoria to Leeds services but as of 2019 they are allocated to Hull and mostly operate routes in Yorkshire.

Fleet details

Class	Operator	No. Built	Year Built	Cars per Set	Unit nos.	Formation
Class 155	Northern Trains	42	1987-1988	2	155341-155347	DMSL-DMS
	Converted to Class 153				155301-155335

Model railways

In 2000 Hornby Railways launched its first version of the BR Class 155 in OO gauge.[11]

References

1. Fox & Hughes 1994, pp. 32–33
2. Marsden 2011, p. 118
3. Vehicle Diagram Book No. 220 for Diesel Multiple Unit Trains (Railcars) (PDF). Barrowmore MRG. Derby: British Railways Board. 1982. DP248, DP249.
4. "Class 155". The Railway Centre. Archived from the original on 9 March 2005.
5. "The Northern Interim Franchise Agreement" (PDF). Bevan Brittan LLP. 26 March 2014. p. 78. Retrieved 22 April 2015.
6. "System Data for Mechanical and Electrical Coupling of Rail Vehicles". Rail Safety and Standards Board. Archived from the original on 5 July 2008. Retrieved 5 January 2009.
7. "The Class 150 Series of DMUs". 9 August 2013. Retrieved 12 June 2018.
8. "Class 155 Super Sprinter DMU". www.traintesting.com. Retrieved 12 June 2018.
9. "DMU Classes 153-159". www.angelfire.com. Retrieved 12 June 2018.
10. "Class 155". Sprinters. Retrieved 12 June 2018.
11. "Hornby BR Class 155 Sprinter". Hornby Railways Collector Guide. Retrieved 2 February 2020.

Sources

• Fox, Peter; Hughes, Barry (1994). DMUs & Channel Tunnel Stock. British Railways Pocket Book No.3 (7th ed.). Platform 5. ISBN 9781872524597.CS1 maint: ref=harv (link)
• Marsden, Colin J. (2011). Traction Recognition (2nd ed.). Ian Allan. ISBN 9780711034945.CS1 maint: ref=harv (link)

External links

• Train Testing site - pictures of class 155 testing and early service running