Bridgman's thermodynamic equations

In thermodynamics, Bridgman's thermodynamic equations are a basic set of thermodynamic equations, derived using a method of generating multiple thermodynamic identities involving a number of thermodynamic quantities. The equations are named after the American physicist Percy Williams Bridgman. (See also the exact differential article for general differential relationships).

The extensive variables of the system are fundamental. Only the entropy S , the volume V  and the four most common thermodynamic potentials will be considered. The four most common thermodynamic potentials are:

Internal energyU
EnthalpyH
Helmholtz free energyA
Gibbs free energyG

The first derivatives of the internal energy with respect to its (extensive) natural variables S  and V  yields the intensive parameters of the system - The pressure P  and the temperature T . For a simple system in which the particle numbers are constant, the second derivatives of the thermodynamic potentials can all be expressed in terms of only three material properties

heat capacity (constant pressure)CP
Coefficient of thermal expansionα
Isothermal compressibilityβT

Bridgman's equations are a series of relationships between all of the above quantities.

Introduction

Many thermodynamic equations are expressed in terms of partial derivatives. For example, the expression for the heat capacity at constant pressure is:

which is the partial derivative of the enthalpy with respect to temperature while holding pressure constant. We may write this equation as:

This method of rewriting the partial derivative was described by Bridgman (and also Lewis & Randall), and allows the use of the following collection of expressions to express many thermodynamic equations. For example from the equations below we have:

and

Dividing, we recover the proper expression for CP.

The following summary restates various partial terms in terms of the thermodynamic potentials, the state parameters S, T, P, V, and the following three material properties which are easily measured experimentally.

Bridgman's thermodynamic equations

Note that Lewis and Randall use F and E for the Gibbs energy and internal energy, respectively, rather than G and U which are used in this article.

gollark: Finally a forward-thinking government which commoditized marriage!
gollark: Idea: fake marriages by sending fake witnesses.
gollark: https://www.theregister.com/2020/10/30/companies_house_xss_silliness/
gollark: No idea.
gollark: There was that UK company which was named an XSS attack, and had to have its name changed.

See also

References

    • Bridgman, P.W. (1914). "A Complete Collection of Thermodynamic Formulas" (PDF). Physical Review. 3 (4): 273–281. Bibcode:1914PhRv....3..273B. doi:10.1103/PhysRev.3.273.
    • Lewis, G.N.; Randall, M. (1961). Thermodynamics (2nd ed.). New York: McGraw-Hill Book Company.
    This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.