Boaz, Wisconsin

Boaz is a village in Richland County, Wisconsin, United States. The population was 156 at the 2010 census.

Boaz, Wisconsin
Location of Boaz in Richland County, Wisconsin.
Coordinates: 43°19′51″N 90°31′38″W
Country United States
State Wisconsin
CountyRichland
Area
  Total0.36 sq mi (0.93 km2)
  Land0.36 sq mi (0.93 km2)
  Water0.00 sq mi (0.00 km2)
Elevation751 ft (229 m)
Population
  Total156
  Estimate 
(2019)[4]
146
  Density405.56/sq mi (156.56/km2)
Time zoneUTC-6 (Central (CST))
  Summer (DST)UTC-5 (CDT)
Area code(s)608
FIPS code55-08600[5]
GNIS feature ID1561987[2]

Geography

Boaz is located at 43°19′51″N 90°31′38″W (43.330793, -90.527280).[6]

According to the United States Census Bureau, the village has a total area of 0.36 square miles (0.93 km2), all of it land.[7]

History

Boaz was the boyhood home of Richard M. Brewer, the first leader of the Regulators in the Lincoln County (New Mexico) War.[8] A skeleton of a mastodon, the Boaz mastodon, was found in 1897, near Boaz.[9]

Boaz Community Park, with historical marker for Richard M. Brewer

Demographics

Historical population
CensusPop.
188075
1940230
1950188−18.3%
1960117−37.8%
19701267.7%
198016127.8%
1990131−18.6%
20001374.6%
201015613.9%
Est. 2019146[4]−6.4%
U.S. Decennial Census[10]

2010 census

As of the census[3] of 2010, there were 156 people, 67 households, and 40 families living in the village. The population density was 433.3 inhabitants per square mile (167.3/km2). There were 68 housing units at an average density of 188.9 per square mile (72.9/km2). The racial makeup of the village was 98.7% White and 1.3% Asian. Hispanic or Latino of any race were 0.6% of the population.

There were 67 households, of which 20.9% had children under the age of 18 living with them, 50.7% were married couples living together, 4.5% had a female householder with no husband present, 4.5% had a male householder with no wife present, and 40.3% were non-families. 29.9% of all households were made up of individuals, and 9% had someone living alone who was 65 years of age or older. The average household size was 2.33 and the average family size was 2.75.

The median age in the village was 49.3 years. 19.2% of residents were under the age of 18; 7% were between the ages of 18 and 24; 19.3% were from 25 to 44; 32.1% were from 45 to 64; and 22.4% were 65 years of age or older. The gender makeup of the village was 52.6% male and 47.4% female.

2000 census

As of the census[5] of 2000, there were 137 people, 64 households, and 41 families living in the village. The population density was 383.2 people per square mile (146.9/km2). There were 67 housing units at an average density of 187.4 per square mile (71.9/km2). The racial makeup of the village was 99.27% White and 0.73% Native American.

There were 64 households, out of which 28.1% had children under the age of 18 living with them, 45.3% were married couples living together, 10.9% had a female householder with no husband present, and 35.9% were non-families. 26.6% of all households were made up of individuals, and 7.8% had someone living alone who was 65 years of age or older. The average household size was 2.14 and the average family size was 2.61.

In the village, the population was spread out, with 21.2% under the age of 18, 10.2% from 18 to 24, 29.9% from 25 to 44, 24.1% from 45 to 64, and 14.6% who were 65 years of age or older. The median age was 40 years. For every 100 females, there were 95.7 males. For every 100 females age 18 and over, there were 89.5 males.

The median income for a household in the village was $31,563, and the median income for a family was $32,000. Males had a median income of $22,500 versus $22,500 for females. The per capita income for the village was $16,883. There were 16.7% of families and 13.2% of the population living below the poverty line, including 41.7% of under eighteens and none of those over 64.

Images

gollark: Anyway, glibc is also apparently somewhat slow and bee, so you should just do all the syscalls yourself.
gollark: Yes, just never check the return value.
gollark: If you *do* somehow run out of memory, then the obvious solution is just to dynamically load Go into your process and have its garbage collector work on your data structures.
gollark: Also, `mmap` any file you need to read onto random pointers, since I heard `mmap` is fast.
gollark: You should also use osmarksmalloc™, as it's HIGHLY fast since it doesn't have to actually bother with maintaining records to deallocate anything.

References

  1. "2019 U.S. Gazetteer Files". United States Census Bureau. Retrieved August 7, 2020.
  2. "US Board on Geographic Names". United States Geological Survey. 2007-10-25. Retrieved 2008-01-31.
  3. "U.S. Census website". United States Census Bureau. Retrieved 2012-11-18.
  4. "Population and Housing Unit Estimates". United States Census Bureau. May 24, 2020. Retrieved May 27, 2020.
  5. "U.S. Census website". United States Census Bureau. Retrieved 2008-01-31.
  6. "US Gazetteer files: 2010, 2000, and 1990". United States Census Bureau. 2011-02-12. Retrieved 2011-04-23.
  7. "US Gazetteer files 2010". United States Census Bureau. Archived from the original on 2012-01-25. Retrieved 2012-11-18.
  8. Wisconsin Historical Society Dictionary of Wisconsin History Archived 2009-07-17 at the Wayback Machine
  9. http://www.wisconsinhistory.org/archaeology/first-people/boaz.asp
  10. "Census of Population and Housing". Census.gov. Retrieved June 4, 2015.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.