Blaser R93 Tactical

The Blaser R93 Tactical is a German bolt action sniper rifle, based on the Blaser R93 design. It has as variants the Blaser LRS 2 and Tactical 2. It is used by German and Dutch police forces as well as the Australian military and special police units. The rifles were manufactured by the German firearms manufacturer Blaser.

Blaser R93 LRS2
Blaser R93 LRS2 .308 Winchester
TypeSniper rifle
Place of originGermany
Service history
Used bySee Users
Production history
Designed1993
ManufacturerBlaser
Produced1993-2017
No. built200,000+
VariantsBlaser LRT
Blaser LRS 2
Blaser Tactical 2
Specifications
Mass.223 Rem., .308 Win., .300 Win Mag 5.4 kg (12 lb) (empty)
.338 Lapua Mag. 5.8 kg (13 lb) (empty)
Barrel length25" (.223 Rem, .308 Win, .300 Win Mag)[1]
26.3" (.338 Lapua)[1]

Caliber7.62×51mm NATO, .300 Winchester Magnum, .338 Lapua Magnum, 6.5×55mm
ActionRadial locked straight-pull bolt action
Feed system5-round detachable box magazine (4 for .300 Win), Original LRT 10-rounds
Sightsdetachable aperture-type iron sights or day or night optics

Design

The LRT (Long Range Tactical), LRS 2 (Long Range Sporter 2) and Tactical 2 rifles are straight-pull bolt-action take down sniper rifles. The straight-pull action design was introduced in the Blaser R93 hunting rifle line. These actions allows for faster follow-up shots compared to traditional turn bolt actions. The rifles are designed to fire small groups (sub 0.07 mrad (7 mm at 100 m; 0.25 moa) with factory match ammunition.

Bulgarian Army snipers

The LRS 2 version, comes chambered in .223 Remington, 6mm Norma BR, 6.5×55mm, .308 Winchester and .300 Winchester Magnum.

An uncommon part of its design is that it is a straight-pull bolt-action rather than a turn-bolt, which allows for much faster follow-up shots. The 14-lug radial collet ensures the centering of the cartridge when fed into the chamber assisting in its accuracy. Barrel changes by an experienced person can take place in under 60 seconds.

The Tactical 1 (very low production) or 2 version is available in .223 Remington, .308 Winchester, .300 Winchester Magnum and .338 Lapua Magnum and has a larger frame, action and barrel to accommodate the use of the .338 Lapua Magnum chambering. The sight is mounted directly to the barrel as normal, however, the design allows the barrel and sight to be removed from the body of the rifle by undoing the two hex screws with a hex key accessed from under the body. This allows the rifle to be carried in a more compact fashion and can be reassembled easily in less than 30 seconds. The safety catch is mounted on the rear of the bolt and reveals a large red dot when pushed forward and up to the "fire" position. One feature of the bolt is that when unloaded and no magazine inserted, the safety has to be pushed forward slightly in order to pull the bolt back. The 5 round magazines in .308 calibre sit flush with the underside of the body when inserted.

Variants

R93 Tactical (1st gen) (1993-1997)
Synthetic body model. Also available under the designations R93 UIT made for UIT competitions (later ISSF) and R93 CISM made for CISM competitions. Detachable staggered feed double stack 10-round box magazine. Chassis and barrel compatible with the regular R93. UIT and CISM versions came with diopter sights.
R93 Tactical 2
R93 Tactical LRS2 (1997-2005)
Detachable box magazine, Single Stack (5-round). The 2nd gen is a ruggeriezed version, also known as Long Range Supporter 2 (LRS-2). New magazine design. Some of the different calibers may require different magazines. LRS stands for Long Range Sporter, but the model is sometimes also referred to as LRT for Long Range Tactical.
R93 Tactical LRS2 .338LM
Large chassis version to facilitate .338 Lapua Magnum.
Blaser R93 Tactical 2 (2005-)
Large chassis version, available in .223 Rem, .308 Win, .300 WinMag, .338LM.
R93 Duo Mod. Hamed
Double barreled side by side rifle made to order for Hamed bin Zayed Al Nahyan.[2]
R93 Handgun Hunting System
[3] An ultra short R93 with a 36 cm barrel and only a pistol grip (no buttstock).

Users

gollark: I have vinyl's user volume on 0 myself.
gollark: ... wait a minute, the point to point link one is just a somewhat constrained case of the general virtual channels one since *both* involve seeing which graphs are connected...
gollark: There's a lot of stuff where it has to do something like two queries and check whether it's on the "to" or "from" end and such.
gollark: Anyway, the P2P-linking solution *has* sort of led to weird code in the apiotelephone logic because it has to do stuff symmetrically.
gollark: Or my phone's internal storage or micro-SD cards or whatever else.

References

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.