Bike paths in Sydney

Bike paths in Sydney, New South Wales, Australia, vary widely, with the majority either shared cycle and pedestrian paths or on road paths,[1][2] and a small number of separated cycleways. In 2009 the Sydney Morning Herald reported that "Sydney's cycleways are not so much an organised network as a fragmented collection of winding paths and half-finished ideas. Most were built or designed when cycling was viewed as a pleasant pastime rather than a practical form of travel and are now poorly suited to commuting."[3]

A bike path in the suburb of Birrong

In 2013 4,400 cyclists rode to or from Sydney central business district on an average day, via the Sydney Harbour Bridge (2,000), Anzac Bridge (1,400) and Anzac Parade (1,000) cycleways.[4]

In July 2020 and in response to COVID-19, 2 pop up cycleways were complete in the City of Sydney.[5] These are part of Transport for NSW CovidSafe Travel Plan with about 20km of cycleways being designated in Randwick, Parramatta and Sydney CBD.[6]

See this section for web-based maps.

Sydney Cycleways network

The Sydney City Council is progressively building an increasing network of 220 kilometres (140 mi) separated cycleways, shared paths and other infrastructure in and adjacent to the central business district. As of December 2016, 12.5 kilometres (7.8 mi) of separated cycleways, 60 kilometres (37 mi) of shared paths and 40 kilometres (25 mi) of other infrastructure were complete.[7][8]

As of December 2016, the Council listed the following popular rides:[9][10]

Bike paths along freeways and tollways

A number of freeways and tollways have been constructed with dedicated separate bicycle paths built alongside.

Gore Hill and Epping Road cycleways
Main article: Gore Hill and Epping Road cycleways

The Gore Hill and Epping Road cycleways comprise two conjoined shared use path for cyclists and pedestrians with a total length of 8.4 kilometres (5.2 mi) from the east and west of the lower north shore. The cycleways are generally aligned with the Gore Hill Freeway and Epping Road respectively. The eastern terminus of the cycleways is in Naremburn, while the western terminus is in North Ryde.[14] In the twelve months to February 2014, between 400 and 500 cyclists used the cycleway at Merrenburn Avenue on an average weekday.[4]

M2 cycleway
Main article: M2 cycleway

The M2 cycleway is a predominately on road 22-kilometre-long (14 mi)[15] cycleway generally aligned with the M2 motorway in the Hills District of Sydney. The eastern terminus of the cycleway is in North Ryde and the north-western terminus is in Seven Hills. As the M2 does not have a separate cycle lane or path, the cycleway comprises the breakdown lane of the roadway.

Cycling access was removed in 2010 during construction work to upgrade the M2. During that time, cyclists were required to use an alternate route on suburban streets that was 5 kilometres (3.1 mi) longer, steeper and slower.[16] The design of the alternative route was criticised due to safety concerns.[17] In August 2013 access was restored westbound from Delhi Road to Windsor Road. Citybound access was restored only for the section from Windsor Road to Pennant Hills Road due to work to stabilise the embankment near the eastbound lanes at Marsfield.[18] There is an alternate route citybound.[19]

As a result of the construction of the NorthConnex cycleway access to the M2 both east and westbound between Pennant Hills Road and Windsor Road was removed with effect from February 2012 adding a further 7 kilometres (4.3 mi) via a detour route, with work expected to be completed by late 2018.[20][21]

The M2 cycleway connects to the M7 cycleway at Seven Hills at its north-western terminus and to the Gore Hill and Epping Road cycleways at North Ryde at its eastern terminus.

M4 cycleway
Main article: M4 cycleway

The M4 cycleway is a 15-kilometre-long (9.3 mi)[22] shared use path for cyclists and pedestrians that is generally aligned with the M4 Motorway in Sydney, New South Wales, Australia. The eastern terminus of the cycleway is in the Sydney Olympic Park, while the western terminus is in South Wentworthville.[13]

In the twelve months to February 2014, between 30 and 40 cyclists used the M4 cyclepath at Holroyd West on an average weekday.[4]

M5 cycleway
Main article: M5 cycleway

The M5 cycleway is a predominately on road 30-kilometre-long (19 mi)[23] cycleway generally aligned with the M5 motorway in south-western Sydney. The eastern terminus of the cycleway is in Arncliffe where it connects with the Cooks River cycleway. The southwestern terminus of the cycleway is in Prestons where is connects with the M7 cycleway. The cycleway does not have a separate cycle lane or path, instead cyclists use the breakdown lane. As of June 2016, due road to works near the King Georges Road interchange, the breakdown lane is closed and cyclists must exit and ride through back streets. There is an off-road shared cyclepath that runs from Bexley Road in Kingsgrove to Belmore Road in Riverwood, but it is not well marked and some road crossings required. A connection to Salt Pan Creek shared path to Bankstown is possible at the Riverwood end.

M7 cycleway
Main article: M7 cycleway

The M7 cycleway is a 40-kilometre-long (25 mi)[22] shared use path for cyclists and pedestrians that is generally aligned with the Westlink M7 in Greater Western Sydney. The southern terminus of the cycleway is located adjacent to the Camden Valley Way at Prestons, while the northern terminus is located adjacent to the Old Windsor Road at Glenwood. The cycleway crosses the M4 motorway at Eastern Creek.[13][24] There are over 60 entry/exit points and has its own bridges. The M7 cycleway connects to the Windsor Road cycleway at Baulkham Hills and to the Prospect Creek cyclepath at Horsley Park.

In the twelve months to February 2014, between 200 and 350 cyclists used on the M7 cycleway at Glenwood and at Rooty Hill on an average weekday, with a greater number on the weekends.[4]

Bike paths across major bridges

Sydney is divided geographically by Port Jackson, Middle Harbour and the Parramatta River, Botany Bay and the Georges River and Broken Bay and the Hawkesbury River and Nepean River. These natural barriers mean that travelling by bike around Sydney requires use of the many bridges. The accessibility of bike paths across bridges is variable as set out in this section.

Sydney Harbour Bridge cycleway
Main article: Sydney Harbour Bridge cycleway

The Sydney Harbour Bridge cycleway comprises two conjoined cycleways from the north and south that crosses the Sydney Harbour Bridge on its western side, linking the Sydney central business district with North Sydney, Sydney's Northern Suburbs and the North Shore. The southern terminus of the cycleway is at Millers Point which can be reached from Argyle Street and Upper Fort Street in The Rocks and connects with the Kent Street cycleway. The northern terminus of the cycleway is at Burton Street, Milsons Point, just below Milsons Point railway station. From this location riders ascend 55 stairs in order to access the path that is located on the roadway level, some 51 metres (167 ft) above the water level.[25] The absence of an efficient or safe cycleway or cycle paths to access the Bridge has resulted in the HarbourLink proposal[26] to give better access to the Sydney Harbour Bridge's northern approach. The NSW Bike Plan 2010[27] identified Naremburn to the Harbour Bridge as one of 13 "major missing links" and a "priority metropolitan link".

On 7 December 2016 the NSW Roads Minister Duncan Gay confirmed that the northern stairway would be replaced with a A$20 million ramp alleviating the needs for cyclists to dismount. At the same time the NSW Government announced plans to upgrade the southern ramp at a projected cost of A$15 million. Both projects are expected to completed by late 2020.[28][29][30]

In the 12 months to February 2014 between 2,000 and 3,000 cyclists used the Sydney Harbour Bridge cycleway on an average weekday.[4]

Pyrmont Bridge

The Pyrmont Bridge is a shared cycle and pedestrian zone. There are signs on the bridge indicating a maximum speed of 10 kilometres per hour (6.2 mph) and requesting that cyclists ride slowly. At the eastern terminus leading to the central business district, Pyrmont Bridge is linked by the Western Distributor to the King Street separated cycleway[31] and to Sussex Street cycle path. There is no bike path from Market Street and walking a bike along the footpath requires ascending a flight of stairs. At the western terminus in Pyrmont, the Pyrmont Bridge is linked to Anzac Bridge by the Union Street separated cycleway and an on road cycle route, with low to medium traffic on Miller Street and Saunders Street. In 2015 around 1,600 cyclists rode on the Union Street cycleway on an average weekday.[32]

Anzac Bridge

The Anzac Bridge has a shared cycle and pedestrian path on its northern side. Between 1,300 and 2,000 cyclists used the Anzac Bridge on an average weekday in the 12 months to February 2014.[4]

At the eastern (Pyrmont) end there is a spiral ramp that begins at the corner of Saunders Street and Quarry Master Drive. To the east Anzac Bridge is linked to Pyrmont Bridge by an on road cycle route (low to medium traffic) on Saunders Street and Miller Street and the Union Street separated cycleway.

At the western (Rozelle) end Anzac Bridge is linked to the Iron Cover Bridge by Victoria Road; to Rozelle and Blackwattle Bays via the Beatrice Bush Bridge; and to Lilyfield Road via a footbridge over Victoria Road. The footbridge is narrow and includes a tight corner at each end, 180° on the eastern end and 90° on the western end. An alternative to the footbridge is to use Beatrice Bush Bridge and cross the Crescent at the traffic lights.

Iron Cove Bridge

The Iron Cove Bridge consists of two bridges. The 1955 bridge has a narrow shared pedestrian and cycle path on the eastern side of the bridge. Between 200 and 300 cyclists used the 1955 bridge on an average weekday in the 12 months to February 2014.[4]

The 2011 duplicate bridge has a 4.3 metres (14.3 feet) wide shared pedestrian and cycle path on the western side of the bridge. Between 350 and 600 cyclists used the 2011 duplicate bridge on an average weekday in the 8 months to October 2013.[4]

At the southern (Balmain) end the Iron Cove Bridge is linked to the Anzac Bridge by Victoria Road; and to King George Park and the Bay Run by a cycle path on the western side and by an underpass from the eastern side via Terry Street and Warayama Place. Alternatively, cross Victoria Road at Terry Street or Wellington Street.

At the northern (Drummoyne) end the Iron Cove Bridge is linked to the Gladesville Bridge by Renwick Street, Wrights Road, Drummoyne Avenue and Cambridge Road from the eastern side; to Henley Marine Drive and the Bay Run by a ramp on the western side; and to Victoria Road and Day Street by a ramp on the western side.

Gladesville Bridge

The Gladesville Bridge has a narrow shared cycle and pedestrian path on its eastern side. Do not attempt to cycle on the western side as the path is too narrow for a bike.

On the southern (Drummoyne) end the connection can be confusing as cyclists are prohibited from using 50m of the path alongside Victoria Road between Wolsley Street and Cambridge Road. The designated route from the Iron Cover Bridge is via Renwick Street, Wrights Road, Drummoyne Avenue and Cambridge Road. The Canada Bay Bike Plan 2005[33] proposed to widen the path between Cambridge Road and Wolseley Street and stated that this was one of five routes "formally included by RTA in BikePlan 2010 and have RTA funding and priorities allocated". This did not happen and was dropped by the Council in 2014.[34]

The northern (Gladesville) end was identified in the NSW Bike Plan 2010[27] as one of 13 "major missing links" and that the "Huntleys Point pedestrian / cycle bridge" was a "priority metropolitan link". As of October 2016 there is no indication when, if at all, work will commence on this bridge.

The designated cycle route from the Gladesville Bridge heading west is via a 180° corner at the end of the bridge, down alongside the access loop (from Burns Bay Road at Hunters Hill to Victoria Road at Gladesville), down four stairs, through a tunnel before descending a further two flights of stairs to Huntleys Point Road.

To ride from Drummoyne to Hunters Hill, as you exit the Gladesville Bridge, the designated cycle route is via a 180° corner at the end of the bridge, down alongside the access loop (from Burns Bay Road at Hunters Hill to Victoria Road at Gladesville). You will drop below the road level where there are four stairs on your left. Go down the stairs and through the tunnel before descending a further two flights of stairs to Huntleys Point Road. Ride north along Huntley's Point Road for about 100 metres where there is a path to the left. Take the path up the hill past the southern end of Keeyuga Road, keep to the left hand path which will take you onto the bridge over Tarban Creek.

The designated cycle route when travelling east along Victoria Road from Gladesville to Drummoyne is to join the footpath next to Victoria Road at Mortimer Lewis Drive. The path drops down away from Victoria Road and goes under Burns Bay Road, coming out at the northern end of Keeyuga Road. 50 metres up Keeyuga Road, cross the road where there is a path to the right. Follow the path to the T junction and turn left which will take you past the southern end of Keeyuga Road. The path stops at the bottom of the hill on Huntley's Point Road. Continue along the grass for 100 metres and turn right up the two flights of stairs, through the tunnel and up a further four stairs. Turn right up the hill where there is a 180° corner that will take you up and over the bridge.

The designated cycle route when travelling from Drummoyne to Gladesville the designated cycle route is via a 180° corner at the end of the bridge, down alongside the access loop (from Burns Bay Road at Hunters Hill to Victoria Road at Gladesville). You will drop below the road level where there are four stairs on your left. Go down the stairs and through the tunnel before descending a further two flights of stairs to Huntleys Point Road. Follow Huntleys Point Road to the south. At the top of the hill, before the road turns left, the path is on the right which crosses back to Victoria Road.

Some cyclists cross onto the access loop as an alternative to descending the stairs however there is limited visibility, especially given the speed of the traffic on the access loop.[35]

Ryde Bridge

The Ryde Bridge consists of two bridges. The eastern concrete bridge (carrying southbound traffic) has a shared cycle and pedestrian path on the eastern side.

Access to the southern (Rhodes) end is via Llewellyn Street. Access to the Old Meadowbank Rail Bridge is via an underpass, Leeds Street and Blaxland Road.

Access to the northern (Ryde) end is via the Loop Road. There are bike paths heading in both directions along the Parramatta River.

Old Meadowbank Rail Bridge
Old Meadowbank Rail Bridge, shared cycle and pedestrian path

The 1895 iron lattice rail bridge at MeadowBank was replaced as the railway bridge for the Main Northern Railway Line by the John Whitton Bridge in 1980. In 2000 the old bridge was converted to a shared cycle and pedestrian path. Between 300 and 425 cyclists used the Old Meadowbank Rail Bridge on an average weekday in the 12 months to February 2014, with a greater number on the weekend.[4]

Access at the southern (Rhodes) end is via Blaxland Road.

Access to the northern (Ryde) end is via Bay Drive or Bank Street. There are bike paths heading in both directions along the Parramatta River.

Silverwater Bridge

The Silverwater Bridge has a narrow shared cycle and pedestrian path on either side of the bridge.

On the southern (Silverwater) side access is via Clyde Street.

On the northern (Ermington) side, access is via a ramp leading from the Parramatta River.

Captain Cook Bridge

The Captain Cook Bridge has a narrow shared cycle and pedestrian path in both directions. Between 125 and 225 cyclists used the Captain Cook Bridge on an average weekday in the 12 months to February 2014, with a greater number on the weekend.[4]

Como Rail Bridge

Between 150 and 300 cyclists used the former Como railway bridge on an average weekday in the 12 months to February 2014.[4] A popular extension for cyclists is to head to Oatley Park on the western side of Oatley.[36]

Alfords Point Bridge

The Alfords Point Bridge has a shared path on the eastern side from Clancy Street Padstow Heights to Fowler Road Illawong.

Spit Bridge

Whilst more than 400 cyclists commute over the Spit Bridge every day,[37] cyclists are not well catered for, with a choice of negotiating the narrow shared path on the western side or riding on the heavily congested road.

The western path, whilst designated as a shared path, is less than 1.2 metres wide at two points.[38] The bridge itself is only four lanes and heavily congested. The only benefit of the congestion is that traffic is moving slowly whilst crossing the bridge. If you are heading south from Spit Bridge, to avoid cycling up Spit Road, after the bridge take the first left into Parriwi Road and cycle up the hill. Parriwi Road reconnects with Spit Road at the top of the hill.

Woronora River Bridge

The Woronora River Bridge has a shared path located just underneath the road. The path can be accessed from Menai Road on the Bangor side and Prince Edward Park Road or River Road on the Sutherland side.

Bike paths

Cooks River cycleway
Main article: Cooks River cycleway

The Cooks River cycleway is a 26-kilometre-long (16 mi) shared use path for cyclists and pedestrians that is generally aligned with the Cooks River in Sydney. The western terminus of the cycleway is in Settlers' Park, Ryde, while the south-eastern terminus is in Botany Bay at Kyeemagh.[39]

The Cooks River cycleway connects to the Parramatta Valley cycleway at Ryde to Sydney Olympic Park and Bicentennial Park at Rhodes, and with the Brighton Le Sands cycleway,[40] which runs south as far as Cronulla. Much of the length is shared cycleway and footpath, though there is some on-road near Homebush.[41] Anecdotal evidence suggests that the section linking Princes Highway at Tempe to Kyeemah Reserve has some non-intuitive routefinding[42] and may benefit from additional signage.

Parramatta Valley cycleway
Main article: Parramatta Valley cycleway

The Parramatta Valley cycleway is a 15-kilometre-long (9.3 mi)[43] shared used path for cyclists and pedestrians that is generally aligned with the course of the Parramatta River. The eastern terminus of the cycleway is at Morrisan Bay Park in Ryde and heads west along dedicated bike paths, quiet streets and the river foreshore to its western terminus in the Parramatta Park.[44][45] There is a short on-road section along Lancaster Road Melrose Park, an elevated steel mesh boardwalks through Ermington Nature Reserve. There is a further short on-road section via Pike Street and South Street Rydalmere to Vineyard Creek. There is an elevated steel mesh boardwalk through Baludarri Wetlands.[46] Cyclists have to cross Macarthur Street Parramatta then use the Gasworks Bridge to continue along the south side of the Parramatta River, before crossing back to the north side at the Parramatta ferry wharf. The decision to put a tunnel through Lennox Bridge was controversial [47] however the tunnel opened in 2015 and links the cycleway with Parramatta Park. There are connections to Rhodes and Olympic Park via Ryde Bridge or Old Meadowbank Rail Bridge; to Windsor Road cycleway via Parramatta Park and Westmead; and then connecting to the M7 cycleway and to the M4 cycleway via Harris Street and Good Street, Harris Park.

In the 12 months to February 2014, between 175 and 300 cyclists used the Parramatta Valley cycleway at Rydalmere on an average weekday, with a greater number on the weekend.[4]

Sydney Olympic Park and Bicentennial Park

Sydney Olympic Park has over 35 kilometres (22 mi) of cycleways,[48] including a children's circuit, a 5.5-kilometre (3.4 mi) Parklands Circuit, a 7.6-kilometre (4.7 mi) Olympic Circuit, a 12.5-kilometre (7.8 mi) River Heritage Circuit and the Louise Sauvage Pathway.

Liverpool to Parramatta T-way cycleways

Shared paths run along the Liverpool to Parramatta T-way from Hoxton Park Road, Liverpool to Davis Road at Wetherill Park, connecting via Horsley Drive and Wetherill Park Reserve. The path rejoins the T-Way at Victoria Street to Davis Road, Wetherill Park. There are connections to Prospect Creek cyclepath, Orphan School Creek cyclepath, Clear Paddock Creek cyclepath. Further towards Parramatta the path runs alongside Cumberland Highway to South Wentworthville then under the M4 and beside Jones Park to emerge beside Pitt Street to the heart of the Parramatta CBD and Parramatta Park.

Much of the route is impaired by the numerous traffic light crossings, with one 4 km section from Stockland Mall to Davis Road through Wetherill Park having eight sets of traffic lights. By combining with the Lower Prospect Canal, the T-Way cycleway provides continuous off-road path from Hoxton park to Parramatta.

Parramatta to Liverpool Rail Trail Cycleway

There is a 25 km (16 mi) cycle path running mostly along the route of the rail line between Parramatta railway station and Liverpool railway station. Being mostly adjacent to the railway line there are very few road crossings or traffic lights. At the northern end the path passes under the railway line near Granville on a very narrow 1.5 m wide path and then follows back streets before becoming a proper off-road path near Merrylands. At Fairfield the trail passes through some commuter car parks (which are quiet on weekends) and traverses a short section of road. Near Canley Vale there is a complicated section that crosses two railway bridges and two roads in the space of 100 metres (or less). Overall, across its 25 km length the path is of a fairly high standard, but on weekday evenings the path tends to become overwhelmed with pedestrians. A 6.5 km extension to this trail is to head south from Liverpool Station to the cycleway on Speed St where you soon will join the shared path to the Casula Railway Station. Cross the railway line at the station and head further south to Glenfield Station on the shared path. The path follows the Georges River and passes the Casula Powerhouse.

Prospect Canal Reserve Cycleway

A 7.6 km path, part of the Lower Prospect Canal Reserve,[49] from Prospect Reservoir in west to Pipehead at Guildford in the east. Entry and exit points are: Frank Street at Guildford, Albert Street cnr Tennyson Pde at Guildford, Sherwood Road at Merrylands, Cumberland Hwy at Merrylands, Cumberland Road at Greystanes, Macquarie Road/Taylor Street at Greystanes, Gipps Road at Greystanes, Bayfield Road at Greystanes, Hyland Road at Greystanes, Reconciliation Road at Wetherill Park and Prospect Reservoir. This wonderful ride has no road crossings at all for 6.5 km due to the original canal bridge crossings being retained and used by the cycleway. It is therefore an excellent area for families to ride. There are cycle path connections at the western end to Pemulwuy and Wetherill park, at the eastern end to the Parramatta-Liverpool Rail Trail and at the Cumberland Hwy to the Parramatta-Liverpool T-Way path. A water bubbler has been provided near the Taylor Street access path (2 km west of the Cumberland Highway).

The path was closed at Prospect in 2010 due to works carried out by Boral, resulting in community outcry.[50] The path was restored to working order in September 2010[51] and is currently usable at the western end to the Prospect Dam area boundary with an at grade traffic light crossing of Reconciliation Road. The path was closed at Prospect Dam from September 2013 to March 2015 [52] due to maintenance work on the dam wall and a major underground electricity cable was laid through the reserve alongside the path and many of the entry/exit paths were then replaced..[53] Community groups continue to fight for a bridge over Reconciliation Road with some funding provided by the previous Labour State government but funding remains uncompleted As of March 2014. At time of this edit, March 2020, no major works on track and it is a wonderful public facility.

Prospect Creek Cyclepath

Running mostly alongside Prospect Creek, this 8 km cycleway connects Fairfield to the Prospect Reservoir, joining onto the Parramatta to Liverpool rail trail and the Lower Prospect Canal Reserve cycleway at each end. The path mostly travels through parkland, passing Prospect Nature Reserve and Rosford Street Reserve, among other parks, and is almost entirely off-road, except for a short on-road section along Douglas Street and Ace Avenue. Despite its length, only three roads are crossed, Fairfield Road, Cumberland Highway, and Gipps Road, with grade separated underpasses for each road.

The Gipps Road in Smithfield underpass can fill with water during heavy rain, however an at grade crossing nearby can be used. Two parallel paths exist on the north and south sides of Prospect Creek through Fairfield Road Park, the former sitting within Cumberland Council and the latter within Fairfield City Council. The path on the south (Fairfield) side provides the best through route to the Rail Trail and Fairfield. At points along the path local councils have created aboriginal information sites that are well worth stopping at.

Orphan School Creek Cyclepath

There is a 10 km shared path along Orphan School Creek from Canley Vale railway station to Abbotsbury. It connects to the Parramatta to Liverpool Rail Trail Cycleway at Canley Vale railway station, to the Clear Paddock Creek shared path at King Road, Fairfield West, to the Liverpool to Parramatta T-way at Myrtle Road, and to the Prospect Dam to Abbotsbury cyclepath at Abbotsbury. An attraction of this path is the complete lack of traffic lights although the multiple at grade road crossings in Greenfield Park can be difficult to cross with children. The major crossing of Smithfield Road is at grade and quite dangerous.

An excellent loop ride is possible by combining the Orphan School Creek path with the Parramatta-Liverpool Rail Trail, the Lower Prospect Canal and Prospect Dam to Abbotsbury paths. This entire loop is about 35 km (22 mi) in length and there are only two traffic lights to stop cyclists on the entire loop. The loop can be shortened by using the Parramatta-Liverpool T-Way path instead, though this path has at least eight traffic light crossings through Wetherill Park.

Prospect Dam to Abbotsbury Cyclepath

An 8 km fully paved section of off-road cycleway runs from the dam wall picnic ground to the Calmsley Hill City Farm at Abbotsbury. The one major road crossing of Horsely Drive has traffic lights, another smaller road is crossed at grade. Connection alongside Horsely Drive to the M7 path is also an off-road path. Excellent access to Western Sydney Regional Park and a large number of mountain bike trails of all standards. There is a rest area (called The Dairy) with toilets and drinkable water. There is no development along the route and therefore no nearby vehicle traffic or pedestrians. The section between Horsely Drive and The Dairy is particularly enjoyable with small undulations and smooth bends. There is a steep descent and climb near the City Farm. A short detour can be made up a very steep hill to "Moonrise" for excellent views of the Sydney Basin.

Windsor Road cycleway
Main article: Windsor Road cycleway

The Windsor Road cycleway is a predominately off-road 31-kilometre-long (19 mi) cyclepath between Parramatta Park and Macquarie Street, Windsor that is generally aligned with the Windsor Road and Old Windsor Road.[54] The cycleway accesses the North-West T-way between Darcy Road, Westmead to Windsor. Some major road crossings are required, particularly on Old Windsor Road but all are controlled by traffic lights. There are connections to the Parramatta Valley Cycleway via Parramatta Park, Toongabbie and Girraween Creek via McCoy Park, Toongabbie Creek cycleway, Blacktown via Sunnyholt Road cycleway and to the M7 cycleway at Bella Vista. Between the 14-mile (23 km) stretch from Westmead to Rouse Hill there are some 26 traffic light controlled road crossings and therefore riding along this cycleway is a very stop-start process. There is a steep climb from Abbott Road up to Seven Hills Road when travelling north.

The Bay Run
Main article: The Bay Run

The Bay Run is a 7-kilometre-long (4.3 mi) shared path (with some sections of separated cycle path) that encircles Iron Cove in the Inner West. Many cyclist commuters use parts of the Bay Run, either to access Lilyfield Road or the Iron Cove Bridge. The Bay Run is also popular with walker and runners. As a result, some pedestrians spill onto the separated cycle path, especially in the most popular times such as summer evenings. The path is entirely off road. Access to and from the Bay Run between Formosa Street, Drummoyne and Brent Street, Russell Lea is poor, with the only access point being Henley Street, Drummoyne, which is obstructed by a power pole. The location and markings of the sections of separated cycle path is confusing as in some places the bike path is painted red, e.g. between Waterfront Drive and Leichhardt Rowing Club and in other the footpath is painted red, e.g. between Rodd Park to Barnstaple Road. Similarly in some places the bike path is on the Bay side of the footpath, e.g. between Leichhardt Rowing Club and Maliyawul Street, while in other places it is on the inland side of the footpath, e.g. along Henley Marine Drive from Duke Avenue to Thompson Street. As of September 2016, works are in progress to widen the bike path and segregate it from the pedestrian path in either direction from the bridge that was constructed across the Iron Cove Creek Canal (near the intersection of Timbrell Drive and the City West Link) earlier in the year.[12][13][55]

At the mouth of Hawthorne Canal, near the junction of Hawthorne Parade, Lilyfield Road, Maliyawul Street, and Dobroyd Parade, there is the option to add an additional 1.8 kilometres (1.1 mi) to the loop circuit by heading south until crossing the footbridge on Barton Street and returning north up the other side of the canal.[11]

Bay to Mountains Cycleway

This major infrastructure project was proposed as part of the 2000 Olympic games works to link Olympic Park with the Olympic Veledrome at Bankstown and the mountain bike and equestrian centre at Abbotsbury. A rough figure-8 route was designed joining Olympic park with Bass Hill, Abbotsbury, Prospect and Guildford. Works over the years have seen a large portion of the western loop of the route constructed from Bankstown Veledrome to Abbotsbury, Prospect Dam and Guildford. The part of this loop from the velodrome north to Sefton is yet to be constructed but there is a short section beside Duck River from South Granville almost to Regents Park and also a short section through Birrong. There has been little work on the eastern loop from Sefton to Auburn however a path near the M4 is completed between North Auburn and Olympic Park however a large loop around Olympic Park exists joining North Strathfield to Newington.

Bass Hill (Bankstown Veledrome) to Canley Vale

A 6 km off-road cyclepath through Mirrembeena Regional Park. Excellent riverside paths through the regional park with an overpass over Henry Lawson Drive. Joins to the Parramatta-Liverpool Rail Trail and Orphan School Creek paths. The double traffic light crossing of Hume Hwy is safe but tedious.

Toongabbie Creek/Windsor Road Cycleway

A 6 km off road cyclepath through Baulkham Hills that connects Old Windsor Road with Windsor Road. Mostly following the Toongabbie Creek. The path is narrow in places though well defined, and has a couple of short steep sections going under some roads. While there are a couple of quiet street crossings there are no major roads to cross. There are other joining paths through Sophia Doyle Res creating alternative routes.

Bush trails
  • Anderson's Fire Trail
  • Lady Carington Drive
  • Leura - Mt Hay
  • Manly Dam Reserve
  • Mt York - Lawson's Long Alley
  • Mt York - Berghofer's Pass
  • Narrow Neck
  • Newnes Junction to Newnes Town
  • Woodford - Glenbrook Fire Trail
gollark: no.
gollark: no.
gollark: no.
gollark: no.
gollark: no.

See also

References
  1. "Australian Bike Trails in Google Maps".
  2. "Australian Bike Trails in Google Earth".
  3. Bibby, Paul (27 April 2009). "Roads to nowhere leave cyclists fuming". The Sydney Morning Herald. Retrieved 3 December 2016.
  4. "Cycling statistics". Roads and Maritime Services. Government of New South Wales. March 2016.
  5. https://transportnsw.info/news/2020/sydneys-new-pop-up-cycleways-help-you-ride-to-work
  6. https://transportnsw.info/covid-19
  7. "Sydney rides". Getting around: Cycling. Sydney City Council. Archived from the original on 8 September 2013. Retrieved 16 December 2016.
  8. "Sydney is riding". Transport and access: Cycle network. Sydney City Council. Retrieved 16 December 2016.
  9. Sydney Rides Guides (Map). Google Maps. Retrieved 16 December 2016.
  10. "Sydney Rides". www.sydneycycleways.net. Sydney City Council. 2016. Retrieved 16 December 2016.
  11. "Bay Ride & Hawthorne Canal Ride" (PDF). www.sydneycycleways.net. City of Sydney. Retrieved 16 December 2016.
  12. "The Bay Run". Leichhardt Council. Leichhardt Municipal Council. 2013. Retrieved 12 July 2015.
  13. "Cycleway Finder". Roads & Maritime Services (Version 3 ed.). Government of New South Wales. 2016. Retrieved 4 December 2016.
  14. 19 Merrenburn Avenue, Naremburn NSW 2065 to Wicks Road, North Ryde NSW 2113 (Map). Google Maps. 2016. Retrieved 9 December 2016.
  15. "Northwest Transitway, Glenwood NSW 2768 to 16 Epping Road, North Ryde NSW 2113". Google Maps. 2016. Retrieved 10 December 2016.
  16. "M2 Upgrade Cyclist route during construction" (PDF). Transurban. Archived from the original (PDF) on 4 March 2016.
  17. "Official Response to M2 Upgrade Alternative Cycle Route". Pushon. Bicycle NSW. Archived from the original on 16 February 2011. Retrieved 24 August 2013.
  18. NSW Transport Road Projects Archived 2013-08-24 at Archive.today
  19. "M2 citybound alternate route" (PDF). Transurban. Archived from the original (PDF) on 4 March 2016.
  20. "Hills M2 Motorway – Bicycle diversion route" (PDF). NorthConnex (Press release). Lendlease Bouygues Joint Venture. 12 September 2016. Retrieved 10 December 2016.
  21. "Detour you way to fitness on the Hills M2" (Press release). Bycycle Network. 28 January 2016. Retrieved 10 December 2016.
  22. Australia Avenue, Sydney Olympic Park NSW 2127 to 108 Old Prospect Road, South Wentworthville NSW 2145 (Map). Google Maps. 2016. Retrieved 5 December 2016.
  23. 15 Marsh Street, Arncliffe NSW 2205 to Camden Valley Way, Prestons NSW 2170 (Map). Google Maps. 2016. Retrieved 10 December 2016.
  24. Westlink M7 (PDF) (Map). Transurban.
  25. "Sydney Harbour Bridge". harbourbrindge.com.au. Nutting Industries Pty. Ltd. Archived from the original on 15 February 2017. Retrieved 7 December 2016.
  26. "Sydney Harbour Link". Archived from the original on 20 April 2009.
  27. "NSW Bikeplan 2010" (PDF). Archived from the original (PDF) on 19 May 2012.
  28. McNally, Lucy (7 December 2016). "Sydney Harbour Bridge cyclists can expect $35 million bike ramp and upgrade by 2020". ABC News. Australia. Retrieved 7 December 2016.
  29. Stempien, Filip (7 December 2016). "New ramps and cycleways for Sydney Harbour Bridge". The Sydney Morning Herald. Retrieved 7 December 2016.
  30. McNab, Heathery (8 August 2016). "Plan in the works to ramp up access to Sydney Harbour Bridge". Daily Telegraph. Australia. Retrieved 7 December 2016.
  31. "King Street West". www.sydneycycleways.net. Archived from the original on 10 September 2015.
  32. "Union Street cycleway". www.sydneycycleways.net. Archived from the original on 10 September 2015.
  33. "Canada Bay Bike Plan 2005" (PDF). Archived from the original (PDF) on 30 March 2012.
  34. "Strategic Review of Bike Plan - Final Report" (PDF). April 2014. Archived from the original (PDF) on 21 June 2017. Retrieved 3 November 2016.
  35. "Gladesville Bridge". Chain Mail No 51, March 2007. Bike North. Archived from the original on 29 February 2016.
  36. "Georges River Council - Walking and Cycling". www.georgesriver.nsw.gov.au. Retrieved 19 April 2019.
  37. "Spit Bicycle and Pedestrian Infrastructure Project". Archived from the original on 20 June 2014.
  38. There's no margin for error on Spit Bridge
  39. "Cycle way to Botany Bay". City of Canterbury-Bankstown. Archived from the original on 15 June 2016. Retrieved 2 November 2016.
  40. "Rockdale City Council Cycleways" (PDF). City of Rockdale. Archived from the original (PDF) on 21 June 2014.
  41. Nobel, D.; NSW Roads and Traffic Authority (1994). "The Cooks River Cycleway". NSW Roads and Traffic Authority (Updated ed.). Retrieved 6 December 2016.
  42. "Comments at MyColleaguesAreIdiots.com". Blog "A Drunken Madman". Archived from the original on 21 March 2012. Retrieved 30 January 2012.
  43. Grove Creek to 2 Macquarie Street, Parramatta NSW 2150 (Map). Google Maps. Retrieved 11 December 2016.
  44. "Cycling in Sydney: Ryde Bridge to Parramatta Park". Retrieved 4 July 2015.
  45. "Travel and maps: cycling". Discover Parrmatta. Parramatta Council. Retrieved 11 December 2016.
  46. "Baludarri Wetlands path forms cycleway link". Parramatta Sun. NSW. 7 January 2015. Archived from the original on 5 July 2015. Retrieved 3 July 2015.
  47. "Outrage over plan to put tunnels through convict-built bridge". The Sydney Morning Herald. NSW. 5 November 2012.
  48. "Sydney Olympic Park Cycling"
  49. "Lower Prospect Canal Reserve". Holyroyd Council. Archived from the original on 17 March 2012.
  50. "Build our bridge campaign". Canal Reserve Action Group. Archived from the original on 18 October 2016./
  51. "Lower prospect canal reserve - "traffic reports"". Archived from the original on 14 October 2016.
  52. "Cyclists get on their bike". The daily telegraph.
  53. "Cyclists pleased with bridge over divide". Parramatta Sun. Archived from the original on 29 November 2013.
  54. 83 Macquarie St, Parramatta NSW 2150 to 98 Macquarie St, Windsor NSW 2756 (Map). Google Maps. Retrieved 18 December 2016.
  55. ″Tenders called for Stage 5 of Bay Run″ Archived 2014-02-28 at the Wayback Machine
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.