Bedford M series

The Bedford M series is a line of commercial vehicle chassis, the first variants of which were made in 1939 by Bedford. It is a normal control 4-wheel chassis designed to carry loads of 2-3 tons. There were two wheelbase lengths offered – 10' 0" or 11' 11" – and each was fitted with the standard 6-cylinder 27.34 hp petrol engine. A 4-speed gearbox with single dry plate clutch delivered power to a floating rear axle with spiral bevel final drive. Brakes were Lockheed hydraulic type and servo assisted operating on all four wheels.

Bedford MSD

Variants

Lorry

Seven variants of the M-series chassis were offered. Their designations were:

MS - short (10'0") wheelbase
  • MSZ : chassis only
  • MSC : chassis and cab
  • MSD : dropside lorry
  • MST : end tipper
ML - long (11'11") wheelbase
  • MLZ : chassis only
  • MLC : chassis and cab
  • MLD : dropside lorry

Bus

In the years between the deletion of the WHB small bus in the mid 1930s and the introduction of the Bedford CA, the limited 12–16 seat bus market demand was met by examples of the M series, either MLC or MLZ. Plaxton converted some of the latter to forward control in the 1950s using the same scaled down Consort body as fitted to similar Austin or Karrier buses, whilst an MLC converted to a 12-seat school bus by Lee Motors for Dorset County Council survives in preservation.

gollark: "immutable" doesn't follow.
gollark: It depends on the precise details of the rest of the language.
gollark: Yes, probably, because you can just emulate a more usual sort of language with 1-tuples.
gollark: We need this.
gollark: ```haskellmain :: IO ()main = loop 0loop :: Int -> IO ()loop x = do print x loop (x + 1)```


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.