Bagnall 0-4-0ST "Alfred" and "Judy"
Alfred and Judy are two four-wheel saddle tank railway steam locomotives. They were built by W.G. Bagnall for use at Par harbour in Cornwall, United Kingdom. The unusually low design was required to cope with extremely tight curves and a very low bridge under the Cornish Main Line. The locomotives are both preserved in operational condition on the nearby Bodmin and Wenford Railway and inspired the Rev. W. Awdry to include them in The Railway Series of children's books as Bill and Ben.
| Alfred & Judy | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 Alfred on display by the Royal Albert Bridge | |||||||||||||||
| |||||||||||||||
| |||||||||||||||
| |||||||||||||||
History
The first ships used Joseph Treffry’s artificial harbour at Par on the south coast of Cornwall in 1833. It was fully operational by 1840 when it was linked to his inland mines and quarries by a canal up the valley to Ponts Mill, where it connected with inclined tramways to Treffry’s copper mines and granite quarries. The canal was supplemented by a horse-drawn tramway to Ponts Mill in 1855 and a separate tramway incline served the Par Consols mine on the hill behind the harbour. In 1860 a connection was made to the recently opened Cornwall Railway which was carried on a viaduct and embankment between the harbour and mine. The mine closed in 1869 and the main tramway was converted to locomotive haulage as the Cornwall Minerals Railway in 1874, but wagons continued to be moved by horses within the harbour complex.[1] Several years later a branch line was taken through an 8 feet (2.4 m) bridge beneath the Cornish Main Line to serve new china clay processing works. As well as the very low bridge, this line had a tight 70 feet (21 m) radius curve; these two restrictions had to be taken into consideration when buying locomotives to work at the harbour.[2]
The first steam locomotive to be put to use by the Treffry Estates was a small four-wheel vertical boiler locomotive built by Sara and Burgess in Penryn in 1912 that arrived at Par the following year. This was supplemented by a more conventional 0-4-0ST in 1916, this was Punch, a second hand Manning Wardle. The Sara locomotive was taken out of service in 1927 to be replaced by a Sentinel known as Toby. This was another four-wheel vertical boiler locomotive but of a much more modern design than the one it replaced. In 1932 Punch was rebuilt by the harbour staff using the Sara boiler but it only operated in this form for five years. At around this time they created another locomotive at Par using the parts from two steam cranes that had been operating around the harbour.[2]
A larger locomotive was ordered from W. G. Bagnall and delivered without a name in 1937; this was later christened Judy which continued the Punch and Judy theme, but the final locomotive was named Alfred after the manager of the harbour, Alfred Truscott. This locomotive, which arrived at Par in 1954, was another Bagnall 0-4-0ST similar to Judy.[2]
The Treffry Estates leased the harbour to English China Clays (ECC) in 1946 and sold it outright to them in 1964. It was then operated as the Port of Par by ECC Ports. Toby was kept as a spare locomotive until it was withdrawn in 1957. Judy was taken out of traffic in 1969, but Alfred was kept in service until 1977. The connection to British Railways' Cornish Main Line was closed in 1965 and most of the sidings around the harbour were taken out of use, the main rail traffic that remained was china clay dried on the harbour that was moved out over the old tramway connection beneath Par Viaduct.[3] This line is still in use but is now worked by DB Schenker locomotives from St Blazey.
Judy
Works number 2572, built 1937.
Bagnall designed a locomotive that was only 90 inches (2.3 m) high by dropping the cab floor down between the main frames. 16 ft 6 in (5.03 m) long over headstocks and 7 ft 5 in (2.26 m) wide, Judy's 33 inches (840 mm) wheels set just 5 feet (1,500 mm) apart allowed her to negotiate the sharp curve by Par Moors drier. The outside cylinders allowed her to be serviced without the use of an inspection pit, and Bagnall-Price valve gear was fitted. She cost £1,200 and weighed 16 long tons (16,000 kg) on delivery.[3][4]
It had originally been planned to name her Chough after a distinctive Cornish bird. The message was received by Bagnall's as Cough, which they thought was rather strange and so she was sent to Par without a nameplate. She was finally given nameplates that read Judy in 1960.[2]
In 1969 she was withdrawn from service as the cost of boiler repairs could not be justified considering how little rail traffic was now handled at Par. She was kept in the engine shed until 1978 when she was moved to the china clay museum at Wheal Martyn near St Austell where she was displayed as a static exhibit alongside a locomotive from the Lee Moor Tramway in Devon.[4]
In 2004 she was given to the care of the Cornish Steam Locomotive Preservation Society (CSLPS). Before Judy could be moved from Wheal Martyn to their base at Bodmin General railway station a specialist had to remove the asbestos insulation around the boiler. A £50,000 grant was made from the Heritage Lottery Fund towards her restoration, and the work was supported by both Poltair Community School and the Cornwall Young Archaeologists Club. Part of the firebox had to be renewed, this being the reason it was taken out of service at Par in 1969. One of the four axle journals were found to have suffered water damage while on static display, but otherwise it was in reasonable condition despite not having been in steam for more than 30 years. Heavy and specialised repairs were undertaken by contractors, but much of the work was done at Bodmin by volunteers. The boiler was steamed in June 2008 and she moved under her own power on 31 October 2008 for the first time in nearly 40 years. Now fitted with a vacuum brake so that she could operate passenger trains, Judy entered service on the Bodmin and Wenford Railway in April 2009.[4]
Alfred
Works number 3058, built 1953.
Although essentially the same design, the second Bagnall locomotive had several small differences. These included flat handrail mountings instead of turned fittings, and a flush saddle tank without the prominent rivets used on Judy. It also weighed 560 pounds (250 kg) more.[3]
No longer required for traffic at Par harbour in 1977, Alfred was moved to the CSLPS site at Bugle in 1978 where a vacuum brake was fitted so that it could haul passenger trains. In 1987 the CSLPS had to move, and so Alfred found a new home on the Bodmin and Wenford Railway. About ten years later it was repainted in yellow livery, the colour used by the fictional Bill and Ben who were inspired by Judy and Alfred, but it has now been repainted back into a green Port of Par livery with the lettering as carried from 1969 to 1977.[4]
This has always been the wider-travelled of the pair of locomotives. In 1955 it spent a short while at Ponts Mill working in the china clay drier there while the regular locomotive was being serviced, the movement between Par harbour and Ponts Mill being made under its own power over British Railways tracks.[3] In 1994 it was taken to Exeter for a rail fair celebrating the 150th anniversary of railways in that city.[5] August 2002 saw it at St Blazey depot of an open day and it was steamed down the branch to Par harbour, the first time in 25 years.[4] In May 2009 it was taken to Saltash as part of the 150th anniversary of the Royal Albert Bridge.[6]
Fictional counterparts
The Rev. W. Awdry visited the Port of Par in 1966 and he soon wrote Main Line Engines, the 21st volume of The Railway Series of children's books. This book featured two diminutive low cab 0-4-0STs named Bill and Ben. These locomotive characters have also appeared in the Thomas the Tank Engine and Friends television series based on the books.[2] although in the television series they are larger than their original prototypes, particular by having their cab roof higher than the saddle tank. This decision was made due to the characters needing room for a smoke generator, motor and eye controls.
References
- Vaughan, John (2008). Rails to Newquay. Oakwood Library of Railway History. 148. Usk: The Oakwood Press. ISBN 978-0-85361-677-1.
- "Port of Par – The End of an Era". Industrial Railway Record. Industrial Railway Society (78): 253–257. 1978.
- Penberthy, D (1997). "Par Harbour". Railway Bylines. Irwell Press. 2 (5): 196–205. ISSN 1360-2098.
- Pit to Port. Bodmin: Cornish Steam Locomotive Preservation Society. 2009.
- Heavyside, Tom (2004). "Cornish Cream". Railway Bylines. Irwell Press. 9 (12): 586–590. ISSN 1360-2098.
- Hunt, Bruce (2009). "Saltash May Fair". Archived from the original on 10 July 2016. Retrieved 25 May 2009.
External links
 |
Wikimedia Commons has media related to Par harbour railway locomotives. |