Automobile air conditioning

Automobile air conditioning (also called A/C) systems use air conditioning to cool the air in a vehicle.

1953 Chrysler Imperial with factory trunk mounted "Airtemp" system

History

A company in New York City in the United States first offered installation of air conditioning for cars in 1933. Most of their customers operated limousines and luxury cars.[1]

In 1939, Packard became the first automobile manufacturer to offer an air conditioning unit in its cars.[2] These bulky units were manufactured by Bishop and Babcock (B&B), of Cleveland, Ohio and ordered on approximately 2,000 cars.[3] The "Bishop and Babcock Weather Conditioner" also incorporated a heater. Cars ordered with this option were shipped from Packard's East Grand Boulevard facility to the B&B factory where the conversion was performed. Once complete, the car was shipped to a local dealer for delivery to customers.

Packard warranted and supported this conversion. However, it was not commercially successful because:

  • The main evaporator and blower system took up half of the trunk space (though this became less of a problem as trunks became larger in the post-war period).
  • It was superseded by more efficient systems in the post-war years.
  • It had no temperature thermostat or shut-off mechanism other than switching the blower off. (Cold air would still sometimes enter the car with any movement as the drive belt was continuously connected to the compressor—later systems would use electrically operated clutches to remedy this problem.)
  • The several feet of plumbing going back and forth between the engine compartment and trunk proved unreliable in service.
  • The price, at US $274 ($4,692.12 in 2014 US dollars), was unaffordable to most people in depression/pre-war America.

The option was discontinued after 1941.[3]

Chrysler Airtemp

The 1953 Chrysler Imperial was one of the first production cars in twelve years to offer modern automobile air conditioning as an option, following tentative experiments by Packard in 1940 and Cadillac in 1941.[4] Walter Chrysler had seen to the invention of Airtemp air conditioning in the 1930s for the Chrysler Building, and had offered it on cars in 1941-42, and again in 1951-52.

The Airtemp was more advanced than rival automobile air conditioners by 1953. It was operated by a single switch on the dashboard marked with low, medium, and high positions. As the highest capacity unit available at that time, the system was capable of quickly cooling the passenger compartment and also reducing humidity, dust, pollen, and tobacco smoke. The system drew in more outside air than contemporary systems; thus, reducing the staleness associated with automotive air conditioning at the time. Instead of plastic tubes mounted on the rear window package shelf as on GM cars, small ducts directed cool air toward the ceiling of the car where it filtered down around the passengers instead of blowing directly on them, a feature that modern cars have lost.[4]

Cadillac, Buick, and Oldsmobile added air conditioning as an option on some of their models in the 1953 model year.[5] All of these Frigidaire systems used separate engine and trunk mounted components.[6][7]

Nash integrated system
Logo on a 1957 car with AMC factory installed air-conditioning system

In 1954, the Nash Ambassador was the first American automobile to have a front-end, fully integrated heating, ventilating, and air-conditioning system.[8][9] The Nash-Kelvinator corporation used its experience in refrigeration to introduce the automobile industry's first compact and affordable, single-unit heating and air conditioning system optional for its Nash models.[10] This was the first mass market system with controls on the dash and an electric clutch.[11] This system was also compact and serviceable with all of its components installed under the hood or in the cowl area.[12]

Combining heating, cooling, and ventilating, the new air conditioning system for the Nash cars was called the "All-Weather Eye".[13] This followed the marketing name of "Weather Eye" for Nash's fresh-air automotive heating and ventilating system that was first used in 1938.[12] With a single thermostatic control, the Nash passenger compartment air cooling option was "a good and remarkably inexpensive" system.[14] The system had cold air for passengers enter through dash-mounted vents.[15] Nash's exclusive "remarkable advance" was not only the "sophisticated" unified system, but also its $345 price that beat all other systems.[16]

Most competing systems used a separate heating system and an engine-mounted compressor, driven by the engine crankshaft via a belt, with an evaporator in the car's trunk to deliver cold air through the rear parcel shelf and overhead vents. General Motors offered a front-mounted air conditioning system made by its Harrison Division on 1954 Pontiacs with a straight-eight engine.[17] It was very expensive and not a fully integrated system with separate controls and ducts for air distribution.[18][19] The heater core continued to be a separate "Venti-Seat" or under the front seat system with its own controls.[20] The unified alternative layout pioneered by Nash "became established practice and continues to form the basis of the modern and more sophisticated automatic climate control systems."[21]

Growth in demand

Air-conditioning for automobiles came into wide use from the late twentieth century. Although air conditioners use significant power, the drag of a car with closed windows is less than if the windows are open to cool the occupants. There has been much debate on the effect of air conditioning on the fuel efficiency of a vehicle. Factors such as wind resistance, aerodynamics and engine power and weight must be considered, to find the true difference between using the air conditioning system and not using it, when estimating the actual fuel mileage. Other factors can affect the engine, and an overall engine heat increase can affect the cooling system of the vehicle.

The innovation was adopted quickly and new features to air conditioning like the Cadillac Comfort Control which was a completely automatic heating and cooling system set by dial thermostat was introduced as an industry first in the 1964 model year.[22] By 1960 about 20% of all cars in the U.S. had air-conditioning, with the percentage increasing to 80% in the warm areas of the Southwest.[23] American Motors made air conditioning standard equipment on all AMC Ambassadors starting with the 1968 model year, a first in the mass market, with a base price starting at $2,671.[24][25] By 1969, 54% of domestic automobiles were equipped with air conditioning, with the feature needed not only for passenger comfort, but also to increase the car's resale value.[26]

Evaporative cooling
Main article: Car cooler
A car cooler

A car cooler is an automobile evaporative cooler, sometimes referred to as a swamp cooler.[27][28] Most are aftermarket relatively inexpensive accessories consisting of an external window-mounted metal cylinder without moving parts, but internal under dashboard or center floor units with an electric fan are available.[29][30] It was an early type of automobile air conditioner[31] and is not used in modern cars relying on refrigerative systems to cool the interior.

To cool the air it used latent heat (in other words, cooling by water evaporation).[32] Water inside the device evaporates and in the process transfers heat from the surrounding air. The cool moisture-laden air is then directed to the inside of the car.[32][33] The evaporate "cooling" effect decreases with humidity because the air is already saturated with water. Therefore, the lower the humidity, such as in dry desert regions, the better the system works. Car coolers were popular, especially among summer tourists visiting or crossing the southwestern United States states of California, Arizona, Texas, New Mexico, and Nevada.[30]

Operating principles
A simple stylized diagram of the refrigeration cycle: 1) condensing coil, 2) expansion valve, 3) evaporator coil, 4) compressor
Regassing the air conditioning of a Ford Focus.

In the refrigeration cycle, heat is transported from the passenger compartment to the environment. A refrigerator is an example of such a system, as it transports the heat out of the interior and into the ambient environment.

Circulating refrigerant gas vapor (which also carries the compressor lubricant oil across the system along with it) from the evaporator enters the gas compressor in the engine bay, usually an axial piston pump compressor, and is compressed to a higher pressure, resulting in a higher temperature as well. The hot, compressed refrigerant vapor is now at a temperature and pressure at which it can be condensed and is routed through a condenser, usually in front of the car's radiator. Here the refrigerant is cooled by air flowing across the condenser coils (originating from the vehicle's movement or from a fan, often the same fan of the cooling radiator if the condenser is mounted on it, automatically turned on when the vehicle is stationary or moving at low speeds) and condensed into a liquid. Thus, the circulating refrigerant rejects heat from the system and the heat is carried away by the air.

In a thermal expansion valve air conditioning system, the condensed and pressurized liquid refrigerant is next routed through the receiver-drier, that is, a one way desiccant and filter cartridge that both dehydrates the refrigerant and compressor lubricant oil mixture in order to remove any residual water content (which would become ice inside the expansion valve and therefore clog it) that the vacuum done prior to the charging process didn't manage to remove from the system, and filters it in order to remove any solid particles carried by the mixture, in addition to acting as a storage vessel for any excess liquid refrigerant during low cooling demand periods, and then through the thermal expansion valve where it undergoes an abrupt reduction in pressure. That pressure reduction results in flash evaporation of a part of the liquid refrigerant, lowering its temperature. The cold refrigerant is then routed through the evaporator coil in the passenger compartment. When the expansion device is a simple fixed metering orifice, known as an orifice tube, the receiver-drier is instead located between the evaporator outlet and the compressor, and in this case it's known as an accumulator. In such an air conditioning system, the accumulator also prevents liquid refrigerant from reaching the compressor during low cooling demand periods.

The air, often after being filtered by a cabin air filter, is blown by an adjustable speed electric powered centrifugal fan across the evaporator, causing the liquid part of the cold refrigerant mixture to evaporate as well, further lowering the temperature. The warm air is therefore cooled, and also deprived of any humidity (which condenses on the evaporator coils and is drained outside of the vehicle) in the process. It is then passed through a heater matrix, inside of which the engine's coolant circulates, where it can be reheated to a certain degree or even a certain temperature selected by the user and then delivered inside the vehicle's cabin through a set of adjustable vents. Another way of adjusting the desired air temperature, this time by working on the system's cooling capacity, is precisely regulating the centrifugal fan speed so that only the strictly required volumetric flow rate of air is cooled by the evaporator. The user is also given the option to close the vehicle's external air flaps, in order to achieve even faster and stronger cooling by recirculating the already cooled air inside the cabin to the evaporator. Finally, whenever the compressor is able to be commanded to operate in a reduced displacement, the vent temperature can also be controlled by acting upon the compressor's displacement. Evaporator freeze over, which stops air from flowing through the evaporator fins, can be prevented in different ways. A temperature switch or a thermistor can control the evaporator coil surface temperature, and a pressure switch or sensing element can monitor the suction pressure (which is in relationship with the refrigerant's evaporating temperature). Both control means can either act (either directly or by means of a control unit fed by their data) upon the compressor's clutch engagement status or, in the case of a variable displacement compressor, its displacement; additionally, a secondary valve located on the suction side can throttle the refrigerant flow so that the evaporator's outlet pressure doesn't fall below a precise value during system operation.

To complete the refrigeration cycle, the refrigerant vapor is routed back into the compressor.

The warmer the air that reaches the evaporator, the higher the pressure of the vapor mixture discharged from it and therefore the higher is the load placed on the compressor and therefore on the engine to keep the refrigerant flowing through the system. Compressor load is also proportional to the condensing temperature.

The compressor can be driven by the car's engine (e.g. via a belt, often the serpentine belt, and an electromagnetically actuated clutch; an electronically actuated variable displacement compressor can also be always directly driven by a belt without the need of any clutch and magnet at all) or by an electric motor.

Power consumption

In a modern automobile, the A/C system will use around 4 horsepower (3 kW) of the engine's power, thus increasing fuel consumption of the vehicle.[34]

gollark: Remember, I have access to the AutoBotRobot database backend.
gollark: ++delete antimemetic bees
gollark: I can undelete myself, you know, using [DATA EXPUNGED].
gollark: ++delete boredom
gollark: It means you're low on available random access RAM memory I suppose.

See also

References
  1. "First Air Conditioned Auto". Popular Science. 123 (5): 30. November 1933. Retrieved 16 April 2015.
  2. "Michigan Fast Facts and Trivia". 50states.com. Retrieved 16 April 2015.
  3. Adler, Dennis (2004). Packard. MBI Publishing. p. 76. ISBN 9780760319284.
  4. Langworth, Richard M. (1994). Chrysler and Imperial: The Postwar Years. Motorbooks International. ISBN 0-87938-034-9.
  5. "1953 Cadillac Brochure". oldcarbrochures.org. p. 5. Archived from the original on 7 February 2015. Retrieved 16 April 2015.
  6. "1953-Buick Heating and AC Folder". oldcarbrochures.org. pp. 10–11. Archived from the original on 7 February 2015. Retrieved 16 April 2015.
  7. "1953 Oldsmobile Brochure". oldcarbrochures.org. p. 23. Archived from the original on 7 February 2015. Retrieved 16 April 2015.
  8. "Nash Low Cost Air Conditioner Cools or Heats by Turning Knob". Popular Mechanics. 101 (5): 86. May 1954. Retrieved 16 April 2015.
  9. "One Control Heating Cooling". Motor. 101: 54. 1954. Retrieved 16 April 2015.
  10. Gunnell, John, ed. (1987). The Standard Catalog of American Cars 1946–1975. Krause Publications. p. 176. ISBN 978-0-87341-096-0.
  11. Daly, Steven (2006). Automotive Air-Conditioning and Climate Control Systems. Elsevier Science & Technology Books. p. 2. ISBN 978-0-7506-6955-9. Retrieved 16 April 2015.
  12. Wolfe, Steven J. (2000). "HVAC Time Line". Refrigeration Service Engineers Society Twin Cities Chapter. Archived from the original on 21 November 2009. Retrieved 16 April 2015.
  13. "News of the Automotive World – Nash Air Conditioner Combines Heating, Cooling, and Ventilating". Automotive Industries. 110: 86. 1954. Retrieved 16 April 2015.
  14. Stevenson, Heon J. (2008). American Automobile Advertising, 1930–1980: An Illustrated History. McFarland. p. 177. ISBN 978-0-7864-3685-9. Retrieved 16 April 2015.
  15. Binder, Al; the Ward's staff (2 February 2001). "Rearview Mirror". Ward's AutoWorld. Archived from the original on 24 November 2011. Retrieved 16 April 2015.
  16. Auto Editors of Consumer Guide (29 November 2007). "1953–1955 Nash and Hudson Ramblers". auto.howstuffworks.com. Retrieved 27 August 2019.
  17. Halter, Tom (3 June 2017). "Cold Comfort: History of Automotive Air Conditioning, Part 3 – Post-World War II". Curbside Classics. Retrieved 27 August 2019.
  18. "Pontiac Master Parts Catalog – image of 1954 AC system". pontiacsafari.com. Retrieved 27 August 2019.
  19. Severson, Aaron (8 April 2008). "Room at the Top: The 1954 Pontiac Star Chief and Class Consciousness in America". Ate Up With Motor. Retrieved 27 August 2019.
  20. "1952–'54 Pontiac Chieftain". Hemmings Motor News. February 2009. Retrieved 27 August 2019.
  21. Nunney, Malcolm J. (2006). Light and Heavy Vehicle Technology. Elsevier Science & Technology Books. p. 147. ISBN 978-0-7506-8037-0.
  22. "Archived copy" (PDF). Archived (PDF) from the original on 10 December 2015. Retrieved 22 November 2016.CS1 maint: archived copy as title (link)
  23. Nash, Gerald D. (1999). Federal Landscape: An Economic History of the Twentieth-Century West. University of Arizona Press. p. 224. ISBN 978-0-8165-1863-0.
  24. Lintern, Mike (1977). Complete guide to American cars, 1966–76. AutoMedia. p. 32. ISBN 9780905395012. Archived from the original on 10 June 2016. Retrieved 16 April 2015.
  25. "U.S. Business: Shuffle & Cut". Time. 6 October 1967. Retrieved 16 April 2015.
  26. "Air Conditioning and Refrigeration Timeline". National Academy of Engineering. Archived from the original on 19 March 2015. Retrieved 16 April 2015.
  27. Hinckley, p. 54 "...it was actually an evaporative cooler – something Californians and Southwesterners have on the roofs of their houses and often call 'swamp coolers' or 'swampies"."
  28. Heitmann, John Alfred (2009). The Automobile and American Life. McFarland. p. 151. ISBN 9781476601991. Archived from the original on 2 May 2016. Retrieved 16 April 2015.
  29. Watt, John R. (1963). Evaporative Air Conditioning. Industrial Press. p. 93. Archived from the original on 25 April 2018. Retrieved 13 August 2017.
  30. Watt, John R. (1986). Evaporative Air Conditioning Handbook (Second ed.). Springer. ISBN 9781461293873. Archived from the original on 25 April 2018. Retrieved 13 August 2017.
  31. Hinckley, p. 54
  32. Sibley, p. 221
  33. "The Easy Way". Popular Mechanics. 75 (5): 676–677. May 1941. Archived from the original on 22 March 2015. Retrieved 16 April 2015.
  34. "Impact of Vehicle Air-Conditioning on Fuel Economy" (PDF). National Renewable Energy Laboratory. Archived (PDF) from the original on 19 March 2015. Retrieved 16 April 2015.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.